Summary of the content on the page No. 1
Summary of the content on the page No. 2
English Contents Product Safety Instructions …………………..….………….……… 1 Safety Guidelines…………………………………………….………. 2 Cleaning the LCD Monitor …………………………………………... 3 INSTALLATION Package Contents………………………………….………………… 4 Front View of the LCD Monitor…………………..………………….. 4 Side View of the LCD Monitor…………………….…………………. 5 Rear View of the LCD Monitor………..………………………………6 Installation………….………………………………………………….. 7 OSD Functions PICTURE PARAMETERS: Brightness / Contrast / Saturation / Hue / Co
Summary of the content on the page No. 3
English PRODUCT SAFETY INSTRUCTIONS Follow and obey all warnings and instructions marked on the LCD monitor. For your safety, please read all the safety and operating instructions before you operate the LCD monitor Keep this user’s manual for future reference. Overloading Do not overload wall outlets, extension cords, or power strips. This can result in fire or electronic shock. Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on
Summary of the content on the page No. 4
English Safety Guidelines WARNING: This device must be operated with the original power supply. CAUTION: The power supply outlet should be located near the LCD Display and should be easily accessible. Always use the appropriate AC cord that is certified for your specific country. Some examples are listed below: USA..................UL Switzerland ..... SEV Canada.............CSA Britain ............. BASE/BS Germany..........VDE Japan ............... Electric Applian
Summary of the content on the page No. 5
English Cleaning the LCD Monitor • MAKE SURE THE LCD MONITOR IS TURNED OFF • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2. If it still is not
Summary of the content on the page No. 6
English INSTALLATION Package Contents Your product package includes: • A 27” Westinghouse LCD Monitor • AC Power Cord • User’s Manual • D-SUB (VGA) Cable Note: For information about purchasing a remote control unit for your LCD monitor, please log on to our website at www.westinghousedigital.com. Front View of the LCD Monitor Use the buttons on the right side of the LCD monitor to display the On Screen Display (OSD). The OSD controls are defined in “OSD Functions”.
Summary of the content on the page No. 7
English Side View of the LCD Monitor 1. Menu Turn OSD Menu ON/OFF Increase/Decrease sound volume or adjust 2. Volume + / - a highlighted control while in the OSD Menu. 3. OSD Selection Highlight a control while in the OSD Menu. ▲ / ▼ Select Active source Input or choose a 4. Input selection while in the OSD MENU. 5. Power Button Turn Power ON/OFF A. Headphone Jack. 5
Summary of the content on the page No. 8
English Rear View of the LCD Monitor 1. VGA Audio IN Connect to the Audio out (Green) from a computer or other device with a VGA output. 2. VGA Using the 15-pin VGA cable provided, connect to a computer or other device with a VGA output. 3. DVI Audio Input (Left / Right) Connect an external audio source to this jack. 4. DVI Using a 20-pin DVI cable, connect to a computer or other device with a DVI output. 5. YPbPr1 Input Connect an external video device with compone
Summary of the content on the page No. 9
English Installation IMPORTANT: Before beginning, make sure all devices are turned off. 1. Connect audio and video cables to a computer Connect one or all of the following into the back of the LCD monitor: VGA CONNECTION: Connect the enclosed analog VGA cable from your computer VGA OUT port to the LCD monitor VGA IN port. DVI CONNECTION: Connect a Digital DVI cable from your computer or DVD DVI OUT port to the LCD monitor DVI-HDCP port. AUDIO CONNECTION: Connect a ster
Summary of the content on the page No. 10
English 2. Connect the power cable Connect the power cord to the LCD monitor then to a properly grounded AC outlet. 3. Turn the Power On Press the Power ON button on the right side of the LCD monitor. 4. Select the input source for the LCD monitor using the OSD menu 5. If connecting to a computer (VGA/DVI): For the best picture quality, set the timing mode of your computer to 1280 x 720 at 75Hz. Refer to the graphic card’s user guide of your computer to set this tim
Summary of the content on the page No. 11
English OSD Function All the OSD function settings are controlled using the control keys on the right side of LCD monitor. To display the OSD main menu, press the MENU key on the right side of front control keys of the LCD monitor. Use the ▲/▼ keys to highlight the desired OSD sub-menu. Main Menu To select a sub-menu, press the INPUT key on the right side of the LCD monitor. Then use the “+” and “-“ keys to adjust the selected OSD sub-menu.
Summary of the content on the page No. 12
English PICTURE PARAMETERS: Function Name Function Brightness Brightness adjustment Contrast Contrast adjustment Saturation Saturation adjustment Hue Hue adjustment Color Temp Color temperature adjustment (Color 1, Color 2, Color 3) Sharpness adjustment Sharpness (Sharpness cannot be adjusted in PC mode) Aspect Ratio Set Display to “STANDARD” / “FILL” / “ZOOM” Backlight Backlight adjustment Reset Reset video settings 10
Summary of the content on the page No. 13
English PC PARAMETERS: NOTE: The PC PARAMETERS menu is only available when the VGA source is selected. Function Name Function Auto Automatically adjust the horizontal phase of the image Clock Clock adjustment Phase Phase adjustment Position Adjust the horizontal and vertical position of the image 11
Summary of the content on the page No. 14
English AUDIO SETTINGS: Function Name Function Volume Volume adjustment Bass Bass adjustment Treble Treble adjustment Balance Balance adjustment Mute Select Audio OFF or ON Reset Reset audio settings 12
Summary of the content on the page No. 15
English PICTURE-IN-PICTURE: Function Name Function Display Mode OFF --> PIP --> PBP --> POP Main Source Select main screen sources VGA --> DVI--> YPbPr1 --> YPbPr2 PIP Source Select sub screen sources Please see PIP/PBP/POP specification in Table 1 Swap Swap main screen and sub-screen source PIP Position Sub-screen display horizontal/vertical position adjustment Sub-screen display size adjustment PIP Size (Small -->Medium --> Large) Audio From Select main screen or su
Summary of the content on the page No. 16
English GENERAL SETTINGS: Function Name Function Menu Position OSD horizontal/vertical position adjustment Menu Timeout Set the time to turn off the OSD automatically Language Set the OSD language Transparency Set OSD transparency level DPMS Turn DPMS On or Off LED Turn the LED ON or OFF System Info Display Input source, type and signal Factory Reset Restore factory default settings 14
Summary of the content on the page No. 17
English Specifications Model Name LCM-27w4 27" (26.97" viewable diagonal area), TFT (Thin Film Transistor), Active Panel Type Matrix WXGA LCD, 1280 x 720 vertical stripe Color Anti-reflective coating + Anti-glare coating Viewing Angles 170° (H) / 170° (V) Input Signal Video/Audio VGA Analog * 1 (75 ohms, 0.7 Vp-p)/Mini-Stereo *1 H/V separated (TTL) for PC DVI-D * 1 (HDCP support) / RCA (L/R) * 1 fh: 30-80 kHz, fv: 50-75 Hz Component Video * 2 / RCA (L/R) Stereo * 2
Summary of the content on the page No. 18
English Troubleshooting No Power • Make sure power button is ON (Blue LED). • Make sure AC power cord is securely connected to the AC socket. • Plug another electrical device (such as a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Power is ON but No Screen Image • Make sure the video cable connected to the LCD monitor is tightly secured to the video output port on the back of the computer. If the other end of the video cable is not attac
Summary of the content on the page No. 19
