Summary of the content on the page No. 1
Summary of the content on the page No. 2
Summary of the content on the page No. 3
________________________________________ 15” LCD MONITOR CHAPTER 1 INTRODUCTION BEFORE INSTALLING YOUR MONITOR Read this manual cover to cover. PAY ATTENTION to all WARNING and CAUTIONS DO NOT use computer components not recommend by the manufacture Do not attempt to service the monitor your self. If a problem occurs, contact the manufacture's authorized service center ABOUT YOUR MONITOR This monitor is a microprocessor-controlled, color monitor that uses a TFT LCD panel. The monitor conforms
Summary of the content on the page No. 4
15” LCD MONITOR _____________________________________ FACTORY-PRESET MODES Table 1 shows standard video mode setting that has been pre-adjusted at the factory for accurate video display. These setting are stored in the monitor's memory Table 1. Factory-Preset Modes PC mode Mode Resolution H-Freq.(KHz) V-Freq(Hz) NEC 640x400 24.83 56.4 VGA 640x350 31.47 70 720x400 31.47 70 640x480 31.47 60 640x480 37.86 72 640x480 37.5 75 SVGA 800x600 35.16 56.3 800x600 37.88 60.3 800x600 48.08 72.2 800x600 46
Summary of the content on the page No. 5
________________________________________ 15” LCD MONITOR SPECIFICATIONS LCD-1510V 15” LCD Monitor Overall Dimension (HxWxD): 404 x 393 x 162 mm Effective Display area (H/V): 304.1 x 228.1 mm Display colors: 16.7M (dithering) colors Scan Frequencies: Horizontal 31.47K to 60KHz Vertical 60Hz to 75Hz Viewing Angle: 140 ° (Horizontal & Vertical) Number of Pixels: 1024x768 pixels Pixel pitch: 0.297x0.297 mm Picture Tube: 15" TFT LCD panel Power: Input 110~240VAC (auto-sensing) Frequency: 48-62Hz C
Summary of the content on the page No. 6
15” LCD MONITOR _____________________________________ BNC connector x 1 (Composite Video Out) Operations: User Controls On/Off Power Button +/- and Up/down keys On Screen Display Auto adjustment, Brightness, contrast color temperature, Hue, Tint, Source select, PIP setup H-position, V-position, OSD position Audio volume, bass, treble, mute Load default Control Type: Digital Compatibility: IBM and compatible, Apple Macintosh, NEC Environmental Limits: Operating Temp 32 ° to 103 °F ( 0 ° to 4
Summary of the content on the page No. 7
Summary of the content on the page No. 8
Summary of the content on the page No. 9
Summary of the content on the page No. 10
Summary of the content on the page No. 11
Summary of the content on the page No. 12
Summary of the content on the page No. 13
Summary of the content on the page No. 14
__________________________________ 15”/17”/19” LCD MONITOR Auto adjustment Automatically adjusts the phase and position of the LCD monitor for the best view setting Color temperature setting provide 9300K, user mode, and 6500K option Brightness adjustment Let user adjust the brightness. The range if from 0 to 99 . Contrast setup Provide user to separately 1024x768 60KHz 75Hz adjust each R, G and B contrast and intensity Color balance Intensity R Intensity G Intensity B Con
Summary of the content on the page No. 15
15”/17”/19” LCD MONITOR _____________________________________ Color balance: the monitor do the white balance automatically. Intensity R: Adjust the R color intensity, the range is from 0 to 63 Intensity G: Adjust the G color intensity, the range is from 0 to 63 Intensity B: Adjust the B color intensity, the range is from 0 to 63 Contrast R: Adjust the R color contrast value, the range is from 0 to 63 Contrast G: Adjust the G color contrast value, the range is from 0 to 63 Contrast B: Adju
Summary of the content on the page No. 16
__________________________________ 15”/17”/19” LCD MONITOR original one. Set as 1, it is 1/8 of original size. Contrast: Adjust the contrast value of PIP screen. The range is from 0 to 127. Intensity: Adjust the intensity value of PIP screen. The range is from 0to 255 Tint: Adjust the Tine value of PIP screen. The range is from 0 to 255 Hue: Adjust the Hue value of PIP screen. The range is from 0 to 255 Source Select We provide VGA, Composite, S-video, YCbCr, PIP composite, PIP S-video, PIP
Summary of the content on the page No. 17
15”/17”/19” LCD MONITOR _____________________________________ CHAPTER 4 VIDEO ADJUSTMENT Video OSD Screen NTSC 15.7K 60.2 Brightness - Adjustment + 49 VER XGA-KDC45-5100 1. Each time, when pressing the menu key , the screen will show as above. You can see the mark, that means the selected item Then you can change the setting through + or -.key. 2. Pressing Sel key to move the arrow down or up. If the selected item has many option to choose, press – or
Summary of the content on the page No. 18
__________________________________ 15”/17”/19” LCD MONITOR Brightness adjustment Adjust the screen brightness value. The range if from 0 to 99. Contrast adjustment Adjust the screen contrast value. The range is from 0 to 127 Intensity adjustment Adjust the screen intensity value. The range is from 0 to 255 Tint adjustment Adjust the screen Tint value. The range is from 0 to 127 Hue adjustment Adjust the screen Hue value. The range is from 0 to 255 Geometry setup We provide Sharpness,
