Summary of the content on the page No. 1
8” LCD Monitor
Instruction Manual
SW248-LM8
SW248-LM8-10006-170309
Summary of the content on the page No. 2
FCC WARNING STATEMENT NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can
Summary of the content on the page No. 3
Table of Contents 1. Before You Begin 1 2. Package Contents 2 3. Monitor Layout 3 4. Monitor Controls 4 5. Remote Control Layout 5 6. Monitor Connections 6 6.1 Connecting the Power Adapter 6.2 Connecting the AV Cable 7. Menu Operations 7 7.1 Picture Menu 7.2 Option Menu 7.3 Clock Menu 7.4 System Menu 8. Troubleshooting Guide 9 9. Technical Specifications 10 Warranty 11 Swann Technical Support 12 -ii-
Summary of the content on the page No. 4
1. Before You Begin Storage 1. Keep this product away from extreme hot or cold places. The storage temperature ranges from -20 to 60 and the operating temperature is from 0 to 40 2. Do not use this product in or near moist environments such as bathtubs, wash basins, kitchens, basements, swimming pools etc. 3. Do not expose the LCD display to high humidity, dust, oil or smoke 4. Do not throw or drop this product 5. Do not subject this device to strong vibrations, shock 6. Do not brus
Summary of the content on the page No. 5
2. Package Contents • LCD Monitor • Car Power Adapter • Power Adapter • Remote Control • AAA Batteries for Remote Control • A / V Cable • Monitor Stand • Instruction Manual If any of the above accessories are damaged or missing, contact Swann Communications for assistance. -2-
Summary of the content on the page No. 6
3. Monitor Layout 1. LCD Screen 2. AV1/AV2 Button 3. AUTO Button 4. PICT Button 5. MENU Button 6. POWER Button 7. UP Button 8. DOWN Button 9. VOL+ / Right Button 10. VOL- / Left Button 11. IR Remote Sensor 12. Monitor Stand 13. Bracket 14. AV2 in jack 15. AV1 in jack 16. Headphone jack 17. DC Input 18. Speaker -3-
Summary of the content on the page No. 7
4. Monitor Controls • AV1/AV2: Switches input from AV1 to AV2 • AUTO: Press to cycle between AV1 and AV2 inputs at 4, 6 or 8 seconds – push again to turn off • • PICT: Choose from 5 image settings: Standard, Soft, Vivid, Light and Personal • • MENU: Press to enter or exit the menu • POWER: Press to turn monitor on/off • ▲: Move selection up in Menu • ▼: Move selection down in Menu • VOL+: Increase Monitor volume or move right in menu • VOL-: Decrease the Mon
Summary of the content on the page No. 8
5. Remote Control Layout POWER: Turn the monitor on/off MUTE: Press to disable sound, press MUTE again or press VOL to enable sound ▲: Move selection up ▼: Move selection down ◄/VOL-: Decrease volume / move left ►/VOL+: Increase volume / move right MENU: Press to enter / exit the Menu MODE: Change image settings from Standard, Soft, Vivid, Light and Personal CALL: Displays current AV channel TIMER: Push to set Sleep Timer up 120 minutes LANG: Sets the menu
Summary of the content on the page No. 9
6. Monitor Connections 6.1 Connecting the Power Adapter: Connect the Power Adapter plug to the input on the side of the monitor marked DC 12V. Plug the other end of the adapter to a power point or cigarette lighter if applicable 6.2 Connecting the AV Cable: AV conversion cable Insert the mini-jack end of the AV Cable into the AV1 or AV2 port on the Monitor. Connect the Yellow RCA cable to the video source of the AV device. Connect the Red and White RCA c
Summary of the content on the page No. 10
7. Menu Operation Press MENU to display following options: PICTURE OPTION CLOCK SYSTEM PRESET 7.1 PICTURE – CONTRAST, BRIGHT, COLOR, SHARP, TINT Press or to select the item and press ◄ or ► to adjust the value Notice The TINT option will appear on NTSC Monitors only 7.2 OPTION – LANGUAGE, CALENDAR, GAME LANGUAGE, CALENDAR and GAME displays on the screen as below description: 7.2.1 LANGUAGE Press or to select Language and press ◄ or ► to change on screen languag
Summary of the content on the page No. 11
7.3 CLOCK TIME – Set the current time ON-TIME – Set time to turn monitor on OFF-TIME – Set time to turn monitor off ATTENTION – Set an alarm time / reminder to appear at a specified time Notice If you wish to use the Timer features TIME must be set first. Times appear in 24 hour clock format. 7.4 SYSTEM COLOR-SYS – Choose the color format from AUTO, PAL, SECAM, NTSC BLUE BACK – Change the background to blue if no signal is detected HORIZONTAL – Flip the image horizontally
Summary of the content on the page No. 12
8. Troubleshooting Guide If your monitor appears to be malfunctioning or is not responding correctly, consult the Troubleshooting Guide below for possible solutions before contacting Technical Support for repair. Problem Possible Causes Check power connection from power No picture, no sound adapter or car adapter. Ensure the provided power adapter is used and Monitor is not in Standby mode. Check monitor is set to correct AV Channel. Confirm yellow AV cable is connected f
Summary of the content on the page No. 13
9. Technical Specifications Product Code: SW248-LM8 Display Type: Color TFT-LCD Video Format: NTSC, PAL, SECAM Video Inputs: AV inputs x 2 Display Resolution: 800 x 600 Display Size: 8” Diagonal Aspect Ratio: 4:3 Audio Inputs: L/R AV inputs x 2 Speakers: 4cm loudspeakers x 2 Audio Output: >0.3W x 2CH Connections: 3.5mm headphone jack, 2 x AV inputs, external power supply Operating Power: DC 12V Monitor Dimensions: 255mm x 185mm x 35mm 10.0” x 7.3” x 1.
Summary of the content on the page No. 14
Swann Communications Limited Warranty Terms and Conditions Swann warrants this product against defects in workmanship and material for a period of one (1) year from its original purchase date. You must present your receipt as proof of date of purchase for warranty validation. Any unit which proves defective during the stated period will be repaired without charge for parts or labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incur
Summary of the content on the page No. 15
Swann Technical Support Worldwide email support tech@swannsecurity.com UNITED STATES toll free AUSTRALIA toll free 1-800-627-2799 1300 138 324 (Su, 2pm-10pm US PT) (M 9am-5pm AUS ET) (M-Th, 6am-10pm US PT) (Tu-F 1am-5pm AUS ET) (F 6am-2pm US PT) (Sa 1am-9am AUS ET) USA Exchange & Repairs New Zealand toll free 562-777-2551 0800 479 266 (M-F, 9am-5pm US PT) NEW ZEALAND toll free UK 0800 479 266 020 3027 0979 (M-F 9am-5pm GMT) International +61 3 8412 4610 IRELAND 015 24
Summary of the content on the page No. 16
Swann Communications 2008© SR247-LM8-10006-170309
