Summary of the content on the page No. 1
SyncMaster G19PPlus
SyncMaster G19PPlus
Install drivers Install programs
Summary of the content on the page No. 2
SyncMaster G19PPlus Model Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPM. If using a screen saver, set it to active screen mode. Th
Summary of the content on the page No. 3
Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. (Class l Equipment only.) Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not bend the plug excessi
Summary of the content on the page No. 4
Installation Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause electric shock or fire inside the m
Summary of the content on the page No. 5
Keep any heating devices away from the power cable. A melted coating may cause electric shock or fire. Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc. Any increase in internal temperature may cause fire. Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified p
Summary of the content on the page No. 6
a slightly moistened, soft fabric. Do not spray water or detergent directly onto the monitor. This may cause damage, electric shock or fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unpl
Summary of the content on the page No. 7
do not install inside a vehicle. This may cause a malfunction, electric shock or fire. In particular, avoid operating the monitor near water or outdoors where it could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact a Service Center . The monitor may malfunction, causing electric shock or fire. Disconnect the plug from the outlet during storms or lightning or if it is not used for a
Summary of the content on the page No. 8
Do not insert metal objects such as chopsticks, wire and gimlet or inflammable objects such as paper and match into the vent, headphone port or AV ports or etc. This may cause electric shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact a the Service Center. When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy
Summary of the content on the page No. 9
product unplugged. Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. Children may try to climb on the product to retrieve an object. The product could fall, causing injury or even fatality. When lifting up or moving the monitor, do not lift the monitor upside down while holding only the stand. This may cause your m
Summary of the content on the page No. 10
SyncMaster G19PPlus Model Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Without stand Monitor With Stand Monitor & Simple Stand Manual
Summary of the content on the page No. 11
Warranty Card User's Guide, Quick Setup Guide (Not available in all Monitor Driver, locations) Natural Color software Cable D-Sub Cable Power Cord Sold separately DVI Cable Front
Summary of the content on the page No. 12
Opens the OSD menu. Also use to exit the OSD menu or return to MENU / [ ]button the previous menu. MagicBright™ MagicBright™ is a new feature providing optimum viewing [] environment depending on the contents of the image you are watching. Currently seven different modes are available: Custom, Text, Internet, Game, Sport, Movie and Dynamic Contrast. Each mode has its own pre-configured brightness value. You can easily select one of seven settings by simply pressing MagicBright™
Summary of the content on the page No. 13
(The configuration at the back of the monitor may vary from product to product.) POWER IN Connect the power cord for your monitor to the power port on the back of the monitor. DVI IN Connect the DVI Cable to the DVI IN port on the back of your monitor. RGB IN Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. Kensington Lock The Kensington lock is a device used to physically fix the system to something when using it in a public place. (The locking device
Summary of the content on the page No. 14
SyncMaster G19PPlus Model Connecting the Monitor Connect the power cord for your monitor to the on the back of the monitor. 1. POWER IN Plug the power cord for the monitor into a nearby outlet. 2. Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card. 2-1. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] 2-2. Using the DVI (Digital) connector on the video card. Connect the DVI Cable to
Summary of the content on the page No. 15
Using the Stand Monitor Assembly Monitor and Bottom Folding the Base The monitor may be reclined -3 to 25 degrees. Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
Summary of the content on the page No. 16
A. Monitor Mounting interface pad (Sold separately) B. 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. Do not use screws longer t
Summary of the content on the page No. 17
1. Insert the CD into the CD-ROM drive. 2. Click "Windows". 3. Choose your monitor model in the model list, then click the "OK" button. 4. If you can see following message window, then click the button. "Continue Anyway" ® ® Then click the "OK" button. (Microsoft Windows XP/2000 Operating System) This monitor driver is under certifying MS logo,and this installation dosen't damage your system.The certified driver will be posted on Samsung Monitor homepage http://www.sams
Summary of the content on the page No. 18
1. Insert your Manual CD into your CD-ROM drive. 2. Click (Start) and "Control Panel". Then, double-click on "Appearance and Personalization". 3. Click " " and then " ". Personalization Display Settings 4. Click "Advanced Settings…". 5. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message “Windows needs…” is displayed, as shown in th
Summary of the content on the page No. 19
7. Check the " " checkbox and click " Browse my computer for driver software Let me ". pick from a list of device drivers on my computer 8. Click "Have Disk…" and select the folder (for example, D:\Drive) where the driver setup file is located, and click "OK". 9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" "Close" "OK" "OK" on the following screens displayed in sequence.
Summary of the content on the page No. 20
® ® Microsoft Windows XP Operating System 1. Insert the CD into the CD-ROM driver. 2. Click "Start" click "Control Panel" and then click the "Appearance and Themes" Icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced." 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
