Summary of the content on the page No. 1
SyncMaster S19A200NW/S22A200B
Monitor
User Manual
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.
Summary of the content on the page No. 2
Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Custody and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Cleaning the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 INSTALLING THE PRODUCT Package Contents
Summary of the content on the page No. 3
1 Major Safety Precautions 1-1 Before You Start Icons used in this manual ICON NAME MEANING Caution Indicates cases where the function may not work or the setting may be canceled. Note Indicates a hint or tip to operate a function. Using this Manual • Make yourself fully aware of the safety precautions before using this product. • If a problem occurs, refer to the 'Troubleshooting' section. Copyright Notice The contents of this manual are subject to change without prior notice for performance im
Summary of the content on the page No. 4
1-2 Custody and Maintenance External Surface and Screen Maintenance Clean the product with a soft dry cloth. • Do not clean the product with an inflammable substance such as benzene or thinner or with a wet cloth. This may result in a problem with the product. • Do not scratch the screen with your fingernails or a sharp object. This may result in scratches or damage to the product. • Do not clean the product directly by spraying water onto the product. If water enters the product, it may res
Summary of the content on the page No. 5
1-3 Cleaning the Monitor Cleaning the Monitor • The panel and exterior of the cutting-edge monitor scratch easily and require careful attention. Clean the monitor according to the following steps. 1. Power off the monitor and PC. 2. Disconnect the power cable from the monitor. To avoid electric shock, be sure you disconnect the cable by gripping the plug and do not touch the cable with wet hands. 3. Wipe the monitor using a soft, slightly damp cloth that has been squeezed . • Do not use a
Summary of the content on the page No. 6
1-4 Safety Precautions Icons used for safety precautions ICON NAME MEANING Failing to follow the precautions marked with this sign, may result in a serious injury or Warning even a fatality. Failing to follow the precautions marked with this sign, may result in a personal injury or Caution property damage. Meaning of Signs Do not perform. Must be followed. The power plug must be unplugged from the Do not disassemble. wall outlet. Do not touch. Must be grounded to prevent electric shock. P
Summary of the content on the page No. 7
Caution Avoid unplugging the power plug while the Make sure to use only the power cord supplied product is operating. by our company. In addition, do not use the power cord of another electric appliance. • Otherwise, it may damage the product due to electric shock. • Otherwise, it may result in electric shock or fire. When unplugging the power plug from the wall Connect the power plug to a wall outlet that can outlet, make sure to hold it by the plug and not be easily reached. by the co
Summary of the content on the page No. 8
Caution Do not let the product drop while moving it. Do not place the product face down on the floor. • This may result in a problem with the product or injury. • This may damage the panel of the product. When installing the product on a console or When putting the product down, handle it shelf, make sure that the front of the product gently. does not protrude out of the console or shelf. • Otherwise, it may result in a problem with • Otherwise, this may cause the product to the product or
Summary of the content on the page No. 9
Avoid moving the product by pulling the power When a gas leak occurs, do not touch the cord or antenna cable. product or the power plug and ventilate immediately. • Otherwise, it may result in electric shock, fire or a problem with the product due to • A spark may result in an explosion or fire. damage to the cable. • During a thunder or lighting storm, do not touch the power cord or antenna cable. Avoid lifting up or move the product by holding Avoid using or placing inflammable spray or o
Summary of the content on the page No. 10
Be careful that adaptor should not be in contact Watching the product from too close a distance with water and therefore not be wet. continuously may damage your eyesight. • This may cause a malfunction, electric shock or fire. Do not use adaptor by the waterside or outside particularly when it rains or snows. Be careful that adaptor should not be wet while cleaning floor with water. Avoid using a humidifier or cooker near the It is important to give your eyes some rest (5 product. minute
Summary of the content on the page No. 11
2 Installing the Product 2-1 Package Contents • Unpack the product and check if all of the following contents have been included. • Store the packaging box in case you need to move the Product at a later stage. Monitor Contents Product Warranty DC-Adapter Installation Manual User Manual (Not available in all locations) Stand Power Cord OPTION D-Sub Cable DVI Cable The cables provided may vary depending on the product you purchase. Installing the Product 2-1
Summary of the content on the page No. 12
2-2 Installing the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. insert the adapter into the head of monitor,when you head a sound "click" then you had fixed the stand-body completely when insert the ADAPTER,one hand hold it and another hand press the head as picture showing the press direction is 45°as picture showing push the stand-base into the stand-body following the arrow as shown,when you head a soun
Summary of the content on the page No. 13
press the adapter hard following the arrow to take it out please don't hold the monitor up down Disassembly is in the reverse order of the assembly. Installing the Product 2-2
Summary of the content on the page No. 14
2-3 Installing the Stand for the Wall Mount This product provides a stand mount of 100 mm x 100 mm(3.9 inches x 3.9 inches) that complies with the VESA specifications. simple stand Stand Mount Stand (Optional) 1. Turn the product off and unplug the power cord from the wall outlet. 2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of the product faces downwards. 3. Separate the stand. 4. Align the groove of the par
Summary of the content on the page No. 15
2-4 Connecting with a PC The connecting part may differ depending on the product model. 1. Connect the product to a PC depending on the video output supported by the PC. • When the graphics card provides D-Sub Analog output • Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable. • When the graphics card provides DVI Digital output • Connect the [DVI IN] port of the product to the [DVI] port of the PC with the DVI cable. The [DVI IN] terminal is supp
Summary of the content on the page No. 16
(The input voltage is switched automatically.) When the product is connected to a PC, you can turn the product on and use it. 3. Cables can be fixed as shown. 2-4 Installing the Product
Summary of the content on the page No. 17
2-5 Kensington Lock A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, refer to the User Manual supplied with the locking device for more information. You must purchase the Kensington Lock separately. To lock the product, follow these steps: 1. Wrap the Kensington lock cable around a
Summary of the content on the page No. 18
3 Using the product 3-1 Setting the Optimal Resolution If you turn the power on after purchasing the product, a message regarding the optimal resolution setting appears on the screen. Select a language and the optimal resolution. ▲/ ▼ : You can select a language with these buttons. MENU : If you press this button, the message disappears. • The message appears up to 3 times if the resolution has not been set to the optimal resolution. • To set the resolution to the optimal resolution • When th
Summary of the content on the page No. 19
3-2 Standard Signal Mode Table This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is dependent on the screen size. Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting the resolution to the optimal resolution of the product. If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the s
Summary of the content on the page No. 20
HORIZONTAL VERTICAL SYNC POLARITY (H/ DISPLAY MODE PIXEL CLOCK (MHZ) FREQUENCY (KHZ) FREQUENCY (HZ) V) IBM, 720 X 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188
