Summary of the content on the page No. 1
LFD DISPLAY
User Manual
ED32C ED40C ED46C ED55C
The color and the appearance may differ depending on the
product, and the specifications are subject to change without
prior notice to improve the performance.
Summary of the content on the page No. 2
Table of contents Installing the Wall Mount Kit 23 Before Using the Product Using MDC Wall Mount Kit Specifications (VESA) 24 Copyright 5 Configuring Settings for Multi Control 46 Remote Control (RS232C) 25 Configuring settings for Multi Control 46 Safety Precautions 6 Cable Connection 25 Symbols 6 Connection 27 MDC Program Installation/Uninstallation 47 Control Codes 28 Cleaning 6 Installation 47 Storage 7 Uninstallation 47 Electricity and Safety 7 What is MDC? 48 Installation 8 Connecting to M
Summary of the content on the page No. 3
Table of contents Picture Off 92 Sleep Timer 99 Screen Adjustment On Timer 100 Reset Picture 92 Picture Mode 81 Off Timer 101 If the input source is PC, HDMI(PC) 81 Holiday Management 101 If the input source is HDMI(AV) 81 Eco Solution 102 Sound Adjustment Energy Saving 102 Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R) 82 Eco Sensor 102 Sound Mode 93 Auto Power Off 102 Picture Size 83 Sound Effect 94 Picture Size 83 Screen Burn Protection 103 Position 84 Pixel Shift 103 Spe
Summary of the content on the page No. 4
Table of contents Safety Lock 110 Testing the Product 122 Prevention of Afterimage Burn-in 145 Button Lock 111 Checking the Resolution and Frequency 122 License 147 Standby Control 111 Check the followings. 123 Lamp Schedule 111 Terminology 148 Q & A 126 OSD Display 112 Power On Adjustment 112 Temperature Control 112 Specifications Change PIN 113 Anynet+ (HDMI-CEC) 114 General 128 Anynet+ (HDMI-CEC) 114 PowerSaver 130 Auto Turn Off 115 Troubleshooting for Anynet+ 116 Preset Timing Modes 131 Magi
Summary of the content on the page No. 5
Chapter 01 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association. Ow
Summary of the content on the page No. 6
Cleaning Safety Precautions ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― Take the following steps when cleaning. Caution ― The following images are for reference only. Real-life situations may differ from what is shown in the images. RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) Power off the product and computer. 1 THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SER
Summary of the content on the page No. 7
Connect the power plug to a grounded power socket (type 1 insulated Storage devices only). • An electric shock or injury may result. High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ! ― Contact Customer Service Center if the inside of the product needs cleaning (service fee will be Do not bend or pull the power cord with force. Be careful not to leave the charged). power cord under a heavy object. • Damage to the cord may result in
Summary of the content on the page No. 8
Caution Installation Do not disconnect the power cord while the product is being used. Warning • The product may become damaged by an electric shock. DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • A fire may result. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • A fire or electric shock may result. Have a technician install the wall-mount hanger. ! • I
Summary of the content on the page No. 9
Do not install the product on an unstable or vibrating surface (insecure shelf, Caution sloped surface, etc.) • The product may fall and become damaged and/or cause an injury. Do not drop the product while moving. • Using the product in an area with excess vibration may damage the • Product failure or personal injury may result. product or cause a fire. ! Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. Do not set down the product
Summary of the content on the page No. 10
Do not leave heavy objects or items that children like (toys, sweets, etc.) on Operation top of the product. • The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury. Warning There is a high voltage inside the product. Never disassemble, repair or During a lightning or thunderstorm, power off the product and remove the modify the product yourself. power cable. • A fire or electric shock may result. • A fire or electric shock may r
Summary of the content on the page No. 11
Do not use or keep combustible spray or an inflammable substance near Caution the product. • An explosion or fire may result. Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! • Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. Ensure the vents are not blocked by tablecloths or curtains. ! • An increased internal temperature may cause
Summary of the content on the page No. 12
Rest your eyes for more than 5 minutes for every 1 hour of product use. Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that • Eye fatigue will be relieved. children or infants cannot reach. • If children have had the battery in their mouths, consult your doctor ! immediately. Do not touch the screen when the product has been turned on for an When replacing the battery, insert it with the right polarity (
Summary of the content on the page No. 13
Chapter 02 Preparations Remove the styrofoam from the product. 2 Checking the Contents Removing the Packaging (for ED32C, ED40C and ED46C models only) ― This image is for reference only. Open the packaging box. Be careful not to damage the product when you open the packaging 1 with a sharp instrument. Check the product and remove the styrofoam and plastic bag. 3 Store the box in a dry area so that it can be used when moving the product in the future. 4 13
Summary of the content on the page No. 14
Check the components and remove the styrofoam and plastic bag. 3 Removing the Packaging(for ED55C models only) ― ― The appearance of actual components may differ from the image shown. The following images are for reference only. Real-life situations may differ from what is shown in the images. Remove the black locking device at the bottom of the box. 1 1 2 3 Store the box in a dry area so that it can be used when moving the product in the future. 4 Using the grooves in the box, lift and re
Summary of the content on the page No. 15
Checking the Components Components - Contact the vendor where you purchased the product if any ― Components may differ in different locations. components are missing. - The appearance of the components and items sold separately may differ from the image shown. - A stand is not provided with the product. To install a stand, you can purchase one separately. Quick setup guide Warranty card D-SUB cable (P.38) Power cord (Not available in some locations) Remote Control (P.18) Batteries
Summary of the content on the page No. 16
Port Description Parts Connects to a source device using an HDMI cable. HDMI IN SERVICE (5V 0.5A) This port is used to upgrade the software. Reverse Side Connects to a source device using a D-SUB cable. RGB IN AUDIO OUT Connects to the audio of a source device. RGB / HDMI AUDIO IN Receives sound from a PC via an audio cable. Connects to MDC using an RS232C-stereo adapter. RS232C IN RS232C OUT Remote Sensor To control the remote control in front of the product, lower the remote control sensor in
Summary of the content on the page No. 17
Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: ― Stand: Sold separately Fix the cable of your anti-theft locking device to a heavy object such as a desk. 1 Put one end of the cable through the loop on the other end. 2 Insert the locking device into
Summary of the content on the page No. 18
Remote Control ― Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. Power on the product. OFF Power off the product. .QZ ABC DEF 1 2 3 - Remote control button functions may GHI JKL MNO Enter the password in the OSD menu. differ for different products. 4 5 6 PRS TUV WXY 7 8 9 DEL-/-- SYMBOL MUTE Mute the sound. 0 Unmuting the sound: Press MUTE again or press the volume control (+ VOL -) button
Summary of the content on the page No. 19
TOOLS INFO Quickly select frequently used functions. Display information on the screen. Move to the upper, lower, left or right menu, or adjust an option's setting. Confirm a menu selection. RETURN EXIT Return to the previous menu. Exit the current menu. PC DVI HDMI DP Manually select a connected input source from A B C D PC, HDMI. It sets safe lock function. MAGICINFO 3D LOCK - Remote control button functions may differ for different products. To place batteries in the remote control 19
Summary of the content on the page No. 20
30˚ Adjusting the OSD with the Remote Control Remote Control Reception Range Buttons Description Open the OSD menu. 1 Select from Picture, Sound, Applications, System or 2 Support in the displayed OSD menu screen. Change settings as desired. 3 Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the left Finish setting. 4 and right. ― Store used batteries out of reach of children and recycle. ― Do not use a new and used battery together. Replace b
