Summary of the content on the page No. 1
LM-7112 / TM-7112
LCD / Touch Monitor
User’s Manual
Rev. Original
I. FEATURES
• Most stable 12.1” LCD monitor with tilt adjust for industrial and
commercial use
• Application covers POS, POI (Kiosk), Factory Automation etc.
• USB HUB function with 2 ports for optional side mount devices (BC300 or
SD300) or USB KB or mouse
• Spill proof and easy maintenance structure allowing easy cleaning
• High quality TFT LCD panel with scaling up function for full screen
display
• Super
Summary of the content on the page No. 2
II. MODEL NUMBERS LM-7112: 12.1” LCD Monitor on adjustable stand TM-7112: 12.1” LCD Touch Monitor on adjustable stand III. MAJOR OPTIONS 1. Color choice between Charcoal and Ivory 2. Side mount device BC-300 (bar code card reader) or SD-300 (MSR and/or optical fingerprint reader) 3. Interface choice between RS232 and USB touch control for TM-7112 IV. CARTON CONTENTS 1. LCD Monitor panel unit (Main unit assembled with Stand) 2. Posiflex Product Information CDROM 3. User’s Manual
Summary of the content on the page No. 3
B. RIGHT SIDE VIEW (Downlink) USB Ports C. REAR VIEW Option unit mounting screws Option kit cable holder Brightness adjust knob Tilt adjust release button (Uplink) USB Port RS232 Port VGA Port DC Jack D. POWER LED INDICATION • Yellow: standby • Blue: operating Part 3
Summary of the content on the page No. 4
VI. HARDWARE INSTALLATION A. Side Mount Upgrade Kit When a side-mount upgrade kit option SD-300 or BC-300 is ordered with the LM/TM-7112, this option is already installed in the delivery. To assemble a separately delivered kit to the monitor, please use the 2 attached screws with washer to fix the kit to right side of LCD panel from back as revealed in rear view. No matter the kit is BC-300 or SD-300 or whether the SD-300 kit itself contains MSR only, finger print sensor only or both o
Summary of the content on the page No. 5
VII. DRIVER INSTALLATION A. INSTALLATION 1. RS232 touch Please find in the attached Posiflex product information CDROM under subdirectory \Drivers\TM_LM\RS232 for RS232 interface touch controller driver. In case this subdirectory is not found in the CDROM received, please use identical driver from relevant product such as \Drivers\TP58_TP59\Touch\RS232. In such subdirectory, please then find the proper descendant for the OS applied such as \RSTC_W9x for Win9x system. Click SETUP.EXE t
Summary of the content on the page No. 6
Click on touch – This selection of touch button disables the double click function of a touch and a left click will be registered at the point where a touch on the screen is made even if the touch is dragged to other spot before release. Click on release – This selection of touch button disables the double click function of a touch and a left click will be registered at the point where a touch is released from the screen. Drag – This selection of touch button disables the double c
Summary of the content on the page No. 7
determines the frequency and duration of the internal buzzer beep as response to touch on touch panel. Touch Point Dots – This list button selects the size of touch point on touch panel. A too small touch size makes the mouse cursor jumpy or even bouncing. A too large touch size results in unsatisfactory touch accuracy. Reset To Default – This button resets all touch parameters. Enable PIR – This check box is not applicable to the monitor. Please keep it unchecked. Enable Touc
Summary of the content on the page No. 8
of mouse at that point. However, the next touch will resume the left button of mouse unless the small window is touched again. Part 8
Summary of the content on the page No. 9
VIII. APPLICATION A. TILT ANGLE ADJUST Press down the tilt adjust release button as arrowed in the right picture and adjust the LCD panel tilt angle between 42.5° and 77.5° for best viewing effect in application and then release the button. The screen will be firmly held for operation. B. BRIGHTNESS ADJUST On lower left edge of back of the LCD panel there is a plastic wheel knob as circled in the picture above. Turning this knob up or down changes the brightness of screen display acc
Summary of the content on the page No. 10
“OSD” button: To enter OSD setup menu, or to perform the function selected in OSD operation. “NEXT” button: To select next item of option functions. “” “” button: To increase setting. “” “” button: To decrease setting. “” “” button: To turn the monitor power ON/OFF. The monitor can be turned OFF only when there is video signal and can be turned ON only when there is video signal and after the “Turn Off Panel” message vanishes. The default status is set to ON when power is suppli
Summary of the content on the page No. 11
to save the current setting and return to “Brightness/Contrast submenu”. “CONTRAST ADJUST”: When this item is selected, there will be only the contrast icon with an adjustment indication bar under it between the main menu area and the video signal mode. Press “+” button to increase contrast. Press “-” to decrease. Press “OSD” button to save the current setting and return to “Brightness/Contrast submenu”. “EXIT”: Return to “Main menu”. “COLOR ADJUST SUBMENU”: There are 4 icons in this su
Summary of the content on the page No. 12
“5000K”: Pressing “OSD” button on this icon will set the color balance to a color temperature of 5000 degrees Kelvin. “6500K”: Pressing “OSD” button on this icon will set the color balance to a color temperature of 6500 degrees Kelvin. “7500K”: Pressing “OSD” button on this icon will set the color balance to a color temperature of 7500 degrees Kelvin. “9300K”: Pressing “OSD” button on this icon will set the color balance to a color temperature of 9300 degrees Kelvin. “EXIT”: Return to
Summary of the content on the page No. 13
under it between the main menu area and the video signal mode. Press “+” button to shift up the screen display. Press “-” to shift down. Press “OSD” button to save the current setting and return to “Geometry adjust submenu”. “EXIT”: Return to “Main menu”. “TOOLS SUBMENU”: When this item is selected, there are 5 icons in this submenu: Press “OSD” button to select item or return to main menu. Press “NEXT” button to select among OSD submenu, reset to default, phase, smoothn
Summary of the content on the page No. 14
have no effect at all if the display mode is not one of the confusing modes. The confusing modes here mean 640 x 400 or 720 x 400 in display resolution as both mode have refresh rate of 70Hz, horizontal frequency of 37.9KHz and pixel frequency of 31.5MHz making it impossible for automatic select. These modes are not used in normal Windows display. “EXIT”: Return to “Main menu”. “EXIT”: Exit OSD setup with all adjustment saved. Part 14
Summary of the content on the page No. 15
IX. SUPPORTED DISPLAY MODES For video signals beyond the supported display modes, there will be a message “Out Of Range” on middle of screen. Maximum supported color depth is 18 bits or 262,144 colors. Supported display modes are as in the table: Display Resolution Refresh Rate (Hz) Horizontal Frequency (KHz) 640*400 70 37.9 60 31.5 640*480 72 37.9 75 37.5 720*400 70 37.9 56 35.1 60 37.9 800*600 72 48.1 75 46.9 Part 15
Summary of the content on the page No. 16
Part 16
Summary of the content on the page No. 17
Part 17
Summary of the content on the page No. 18
Part 18
Summary of the content on the page No. 19
Part 19
Summary of the content on the page No. 20
T31454 Part 20
