Summary of the content on the page No. 1
Manual
file:///D|/My%20Documents/dfu/420WN6/english/420wn6/MANUAL.HTM2005-11-07 12:43:09 PM
Summary of the content on the page No. 2
Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance • FAQs • Troubleshooting • Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: ● Unplug the mo
Summary of the content on the page No. 3
Safety & Troubleshooting Consult a service technician if the monitor does not operate normally when the operating instructions given in this manual have been followed. RETURN TO TOP OF THE PAGE Installation Locations ● Avoid exposure to heat and extreme cold ● Do not store or use the product in locations exposed to heat, direct sunlight or extreme cold. ● Avoid moving the product between locations with large temperature differences. Choose a site that falls within the following
Summary of the content on the page No. 4
About This Manual About This Manual About This Guide • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor TV. It describes the features, setup, operation and other important information. It includes the following sections: ● Safety and Troubleshooting Information provides tips and solutions for common problems as well as other related information you may need. ● About This Electronic User's Manual gives an over
Summary of the content on the page No. 5
About This Manual Notes, Cautions and Warnings Throughout this guide blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows: NOTE: This icon indicates important information and tips that help you make better use of your computer system. CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data. WARNING: This icon indicates the pote
Summary of the content on the page No. 6
Product Information Product Information Product Features • Lead-free Product • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Product Features 420WN6 ● Less management effort for maximum productivity ❍ Multiple displays form a daisy chain to show uniform ❍ Monitor is network controllable for remote management ❍ Input connectors: CVBS, S-video, SCART, YPbPr
Summary of the content on the page No. 7
Product Information Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your health and promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment.Philips complies with the European Community stringent RoHS Directive mandating restrictions on hazardous substances in electrical and electronic equipment. With Philips, you can be confident that your display device does not harm the environment. Technical S
Summary of the content on the page No. 8
Product Information WXGA Hsync 48 kHz, Vsync 60 Hz (N.I.) • Input Frequency SVGA Hsync 38 kHz, Vsync 60 Hz (N.I.) VGA/DVI-D Hsync 31 kHz, Vsync 60 Hz (N.I.) D-sub, S-Video, TV-RF, SCART composite, components • Video interface video, and DVI-D AUDIO • Input level for PC/SVHS/SCART 500 mV nominal • Loudspeaker 10W Stereo Audio (200Hz~10kHz, 8 ohm, 10% THD) OPTICAL CHARACTERISTICS • Contrast ratio 1100:1 (with DCR on) 2 • Brightness 500 cd/m (typ.) • Peak contrast angle 6
Summary of the content on the page No. 9
Product Information * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes • Recommended 1360 x 768 at 60Hz 10 factory preset modes: Resolution Mode H. freq (kHz) V. freq (Hz) PC 640x350 VGA-1 31.469 70.086 640x480 VGA VESA 60 31.469 59.940 640x480 VGA VESA 75 37.500 75.000 720x400 IBM VGA 3H 31.468 70.087 800x600 SVGA VESA 56 35.156 56.250 800x600 SVGA VESA 60 37.879 60.317 800x600 SVGA VESA 75 46.875 75.000 1024x768 XGA VESA 60 48.363 60.0
Summary of the content on the page No. 10
Product Information 720x480 480p 31.470 60.000 720x576 576p 31.250 50.000 1280x720 720p 37.500 50.000 1280x720 720p 45.000 60.000 1920x1080 1080i 28.125 50.000 1920x1080 1080i 33.750 60.000 RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will then 'wake up' a
Summary of the content on the page No. 11
Product Information 1272mm x 680mm x 300mm (incl. Pedestal, Speakers) • Dimension (WxHxD) * 1052mm x 644mm x 150mm (w/o Pedestal, Speakers) • Weight 35 kg (incl. Pedestal, Speakers) • Power supply 100 — 240VAC, 60 — 50Hz PC Mode: 140 W (typ.) • Power consumption TV Mode: 220 W (typ.) • Temperature (operating) 5° C to 35° C • Relative humidity 20% to 80% • System MTBF 50K hrs (excluding CCFL 50Khrs) * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Pin Assignment 1.
Summary of the content on the page No. 12
Product Information 5 No connect 13 No connect 21 No connect T.M.D.S. Clock 6 DDC Clock 14 +5V Power 22 Shield 7 DDC Data 15 Hot Plug Detect 23 T.M.D.S. Clock+ No connect 16 Ground (for +5V) 24 T.M.D.S. Clock- 8 2. The 15-pin D-sub connector (male) of the signal cable: Pin Pin Assignment Assignment No. No. 1 Red video input 9 DDC +5V Green video input Cable detect 2 10 Identical output, Blue video input 3 11 connected to pin 10 4 Ground 12 Serial data line (SDA) 5 NC 13 H. Sync / H+V
Summary of the content on the page No. 13
Product Information RS-232 (EIA-232-A) Function Pin No. 3 Transmit Data (TD) from DTE to DCE 2 Receive Data (RD) from DCE to DTE 7 Request to Send (RTS) 8 Clear to Send (CTS) 6 DCE Ready (DSR) 5 Signal Ground (SG) 1 Received Line Signal Detector (DCD) 4 DTE Ready (DTR) 9 Ring Indicator 4. SCART Connector Pin Signal Pin No. No. Audio right channel output (0.5 Vrms, < 1K 1 2 ohms) Audio right channel input (0.5 Vrms, > 10K 2 1 ohms) Audio left channel output (0.5 Vrms, < 1K 3 6 oh
Summary of the content on the page No. 14
Product Information 7 Blue signal I/O (0.7 Vp-p, 75 ohms) 7 Function switching I/O (L: < 2V, H: > 10V, 10K 8 8 ohms) 9 Green signal ground 9 10 Intercommunication data line No. 1 10 11 Green signal I/O (0.7 Vp-p, 75 ohms) 11 12 Intercommunication data line No. 2 12 13 Red signal ground 13 14 Blanking signal ground 14 15 Red signal I/O (0.7 Vp-p, 75 ohms) 15 Blanking signal I/O (L: < 0.4V, H: >1.0V, 75 16 16 ohms) 17 Composite video signal ground 18 18 Blanking signal ground 17 Composite vide
Summary of the content on the page No. 15
Product Information RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/420WN6/english/420wn6/PRODUCT/product.htm (10 of 10)2005-11-07 12:44:12 PM
Summary of the content on the page No. 16
Installing your LCD Monitor/TV Installing your LCD Monitor/TV Product Description • Connecting to Your PC, TV antenna, DVD/VCR etc. • Getting Started • Optimizing Performance Product Description Installing your LCD Monitor/TV Side View (Left) file:///D|/My%20Documents/dfu/420WN6/english/420wn6/INSTALL/install.htm (1 of 6)2005-11-07 12:44:16 PM
Summary of the content on the page No. 17
Installing your LCD Monitor/TV 1 INPUT Selecting input source Increase or decrease the channel number 2 or moving up or down to highlight the function in OSD Increase or decrease the level of audio volume or 3 moving left or right to highlight the sub-menu in the selected function of OSD 4 MENU Open the OSD or confirm the selected function 5 DC power switch On/Off RETURN TO TOP OF THE PAGE Side View (Right) file:///D|/My%20Documents/dfu/420WN6/english/420wn6/INSTALL/install.htm (2 of 6
Summary of the content on the page No. 18
Installing your LCD Monitor/TV Audio (left and right) in put for compo site 1 Audio input for composite input signal in put. 2 Composite input Composite (CVBS) signal input 3 S-Video input S-Video signal input 4 Earphone output Earphone output 5 TV tuner TV tuner input (available in TV version only) RETURN TO TOP OF THE PAGE Rear View file:///D|/My%20Documents/dfu/420WN6/english/420wn6/INSTALL/install.htm (3 of 6)2005-11-07 12:44:16 PM
Summary of the content on the page No. 19
Installing your LCD Monitor/TV 1 AC power in AC in 2 AC power AC power switch External speakers output 3 Speakers output PC analog D-Sub output 4 D-Sub output PC digital input 5 DVI-D input PC analog D-Sub input 6 D-Sub input RS232 network connection Input 7 RS232 input RS232 network connection output for the use of loop through function 8 RS232 output file:///D|/My%20Documents/dfu/420WN6/english/420wn6/INSTALL/install.htm (4 of 6)2005-11-07 12:44:16 PM
Summary of the content on the page No. 20
Installing your LCD Monitor/TV PC stereo audio input 9 PC audio Audio (left and right) input for component signal input 10 Audio input for component signal Component (YP P ) signal input b r 11 Component input Composite (CVBS) output for the use of loop through function 12 Composite output Audio (left and right) out put for compo site signal out put. 13 Audio output for composite output SCART connection (for the use of European model only) 14 External / EURO-AV Kensington lock 15 Kensingt
