Summary of the content on the page No. 1
Philips 150X Electronic User's Manual
file:///D|/Philips LCD/english/150X/Index.htm [4/18/2001 9:12:23 AM]
Summary of the content on the page No. 2
Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance • Installation Locations • Correct Handling of the LCD Monitor • FAQs • Troubleshooting • Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. Read and follow these instructions when con
Summary of the content on the page No. 3
Safety & Troubleshooting falling within the following temperature and humidity ranges. ❍ Temperature: 5-35°C 41-95°F ❍ Humidity: 20-80% RH ● Do not subject the LCD monitor to severe vibration or high impact conditions. Do not place the LCD monitor inside a car trunk. ● Take care not to mishandle this product by either knocking or dropping during operation or transportation. ● Do not store or use the LCD monitor in locations exposed to high humidity or a dusty environment. Also do not a
Summary of the content on the page No. 4
Safety & Troubleshooting 1. When handling the monitor, grip the bottom firmly with both hands and ensure that the front panel faces outward before lifting. Please refer to the diagram on the right. 2. Handling the monitor with care prevents scratching and damage. If the monitor becomes damaged, immediately disconnect the power from the unit and have it checked by a qualified service person before using it again. 3. To prevent fire or electrical shock, do not drop the monitor. 4. When moving
Summary of the content on the page No. 5
About This Electronic User's Manual About This Electronic User's Manual About This Guide • Other Documents You May Need • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips 150X LCD Monitor. It describes the LCD monitor's features, setup, operation and other pertinent information. Its contents are identical to the information in our printed version. Sections are as follows: ● Safety and Troubleshooting Information provides tips and
Summary of the content on the page No. 6
About This Electronic User's Manual Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions, or warnings. They are used as follows: NOTE: This icon indicates important information and tips that help you make better use of your computer system. CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data. WARNING: This icon
Summary of the content on the page No. 7
150X Product Information Product Information Product Features • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views •Attention Signals Product Features Brilliance 150X ● 15" LCD monitor with high-tech design and excellent display performance. ● New DVI standard for both digital and analog interface. ● Front firing speakers with 36W PMPO stereo sound output ● Sliding height ad
Summary of the content on the page No. 8
150X Product Information Separate sync • Sync input signal Composite sync Sync on green • Sync polarities Positive and negative XGA Hsync 48- 60 KHz, Vsync 60 - 75 Hz (N.I.) • Input Frequency SVGA Hsync 35- 50 KHz, Vsync 56 - 75 Hz (N.I.) VGA Hsync 31- 38 KHz, Vsync 60 - 75 Hz (N.I.) Dual input: It can be switching via OSD selection. DVI-I • Video interface (Integrated) interface, which both provides analog and digita
Summary of the content on the page No. 9
150X Product Information RETURN TO TOP OF THE PAGE Resolution & Preset Modes • Maximum 1024 x 768 at 75Hz • Recommended 1024x768 at 60Hz 14 USER DEFINABLE MODES 14 factory preset modes: dot rate H. freq (KHz) Mode Resolution V. freq (KHz) (MHz) 25.175 31.469 IBM VGA 10h 640*350 70.086 28.322 31.469 IBM VGA 3h 720*400 70.087 25.175 31.469 IBM VGA 12h 640*480 59.940 30.200 35.000 MACINTOSH 640*480 67.000 31.500 37.861 VESA 640*480 72.809 31.500 37.500 VESA 640*480 75.000 36.000 35.156 VESA 800*6
Summary of the content on the page No. 10
150X Product Information Power Management Definition Power VESA Mode Video H-sync V-sync Power Used LED color Saving (%) ON Active Yes Yes < 25W 0 % Green Stand-by Blanked No Yes < 5W 83.3% Amber Suspend Blanked Yes No < 5W 83.3% Amber OFF Blanked No No < 3W 90% Amber ® ® This monitor is ENERGY STAR compliant. As an ENERGY STAR Partner, PHILIPS has ® determined that this product meets the ENERGY STAR guidelines for energy efficiency. RETURN TO TOP OF THE PAGE Physical Specifications • Di
Summary of the content on the page No. 11
150X Product Information Pin Pin Pin Signal Assignment Signal Assignment Signal Assignment No. No. No. 1 T.M.D.S. Data2- 9 T.M.D.S. Data1- 17 T.M.D.S. Data0- 2 T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+ T.M.D.S. Data2/4 T.M.D.S. Data1/3 T.M.D.S. Data0/5 3 11 19 Shield Shield Shield 4 T.M.D.S. Data4- 12 T.M.D.S. Data3- 20 T.M.D.S. Data5- 5 T.M.D.S. Data4+ 13 T.M.D.S. Data3+ 21 T.M.D.S. Data5+ T.M.D.S. Clock 6 DDC Clock 14 +5V Power 22 Shield 7 DDC Data 15 Ground (for +5V) 23 T.M.D.
Summary of the content on the page No. 12
150X Product Information C2: Analog Green Video Out C3: Analog Blue Video Out C4: Analog Horizontal Sync C5: Analog Common Ground Return (Red, Green, Blue Video Out) RETURN TO TOP OF THE PAGE Views Follow the links to see various views of the monitor and its components. Front View Product Description Rear View Product Description Side View Product Description Attention Signals Attention Signals Attention signal display information and alerts about the status of the monitor. 1. CANNOT DISPLAY
Summary of the content on the page No. 13
150X Product Information -- This warning appears when the input signal from your computer is not in a standard video mode or is out of the monitor's scanning range. Solution: For best display performance, reset the display mode of your computer to 1024x768@60Hz for 14" or 15" models. 2. NO VIDEO INPUT -- This message appears when there is no signal input. Solution: Make sure interface and power cables are properly connected. 3. CHECK CABLE CONNECTION -- This message appears when a signal c
Summary of the content on the page No. 14
150X Product Information 4. ENTERING SLEEP MODE -- This message appears when monitor is about to enter power saving. To wake up monitor, press any key or click on mouse. 5. WAITING FOR AUTOMATIC ADJUSTMENT -- This message is displayed when the auto adjustment button is pressed. It disappears when automatic adjustments are completed. 6. SECOND VIDEO IS NOT AVAILABLE -- This message appears when a user selects a second unavailable video source from the OSD from the INPUT SELECTION menu of O
Summary of the content on the page No. 15
150X Product Information file:///D|/Philips LCD/english/150X/PRODUCT/PRODUCT.HTM (9 of 9) [4/18/2001 9:12:31 AM]
Summary of the content on the page No. 16
Installing your LCD Monitor Installing your LCD Monitor Your LCD Monitor : Front View Product Description • Connecting to Your PC • Getting Started • Optimizing Performance Front View UP and DOWN buttons are used when adjusting the OSD of your monitor LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your monitor. BRIGHTNESS hotkey. When the UP and DOWN arrow buttons are pressed, the adjustment controls for the BRIGHTNESS will show up. file:///D|/Phili
Summary of the content on the page No. 17
Installing your LCD Monitor .OK button which when pressed will take you to the OSD controls POWER button switches your monitor on Automatically adjust the horizontal position, vertical position, phase and clock setting. RETURN TO TOP OF THE PAGE Rear View 1.Audio in For audio in file:///D|/Philips LCD/english/150X/INSTALL/INSTALL.HTM (2 of 5) [4/18/2001 9:12:35 AM]
Summary of the content on the page No. 18
Installing your LCD Monitor 2.Mic out For microphone output 3.DC 18V This monitor only accepts DC 18V power in This monitor is DVI-I (digital & VGA) interface standard 4.DVI-I RETURN TO TOP OF THE PAGE Side View file:///D|/Philips LCD/english/150X/INSTALL/INSTALL.HTM (3 of 5) [4/18/2001 9:12:35 AM]
Summary of the content on the page No. 19
Installing your LCD Monitor Audio power on/off and volume adjustment Audio power led BASS on/off Headphone jack RETURN TO TOP OF THE PAGE file:///D|/Philips LCD/english/150X/INSTALL/INSTALL.HTM (4 of 5) [4/18/2001 9:12:35 AM]
Summary of the content on the page No. 20
Installing your LCD Monitor Optimizing Performance ● For best performance, ensure that your display settings are set at 1024x768@60Hz (for 14" & 15") or 1280x1024@60Hz (for 17" & 18"). Note: You can check the current display settings by pressing the OSD "OK" button once. Go into the Product Information. The current display mode is shown on the item called RESOLUTION. ● You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the best performance out of your monit
