Summary of the content on the page No. 1
Manual
file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/MANUAL.HTM [3/2/2004 3:43:45 PM]
Summary of the content on the page No. 2
Safety and Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance • Installation Locations • FAQs • Troubleshooting • Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer m
Summary of the content on the page No. 3
Safety and Troubleshooting RETURN TO TOP OF THE PAGE Installation Locations ● Avoid exposure to heat and extreme cold ● Do not store or use the product in locations exposed to heat, direct sunlight or extreme cold. ● Avoid moving the product between locations with large temperature differences. Choose a site that falls within the following temperature and humidity ranges. ❍ Temperature: 5-40°C 41-104°F ❍ Humidity: 20-80% RH ● Do not subject the product to severe vibrati
Summary of the content on the page No. 4
About This Manual About This Manual About This Guide • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor TV. It describes the features, setup, operation and other important information. It includes the following sections: ● Safety and Troubleshooting Information provides tips and solutions for common problems as well as other related information you may need. ● About This Electronic User's Manual gives an over
Summary of the content on the page No. 5
About This Manual Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows: NOTE: This icon indicates important information and tips that help you make better use of your computer system. CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data. WARNING: This icon indicates the potential for bodily harm and te
Summary of the content on the page No. 6
Product Information Product Information Product Features • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views • Physical Function Product Features 150T4 ● 15-inch XGA LCD all-in-one Monitor TV with excellent display performance ● Multiple video input allowing display of PC, TV, HD (the US/Canada/Korea/Taiwan), VCD, DVD, Progressive DVD and CamCorder ● Digital High
Summary of the content on the page No. 7
Product Information PC SCANNING • Vertical refresh rate 56Hz-76Hz • Horizontal frequency 30kHz-63kHz PC VIDEO • Video dot rate 80 MHz • Input impedance - Video 75 ohm - Sync 2K ohm • Input signal levels 0.7 Vpp Separate sync • Sync input signal • Sync polarities Positive and negative XGA Hsync 48- 63 kHz, Vsync 60 - 75 Hz (N.I.) SVGA Hsync 35- 50 kHz, Vsync 56 - 75 Hz (N.I.) • Input Frequency VGA Hsync 31- 38 kHz, Vsync 60 - 75 Hz (N.I.) • Video interface D-su
Summary of the content on the page No. 8
Product Information • Peak contrast angle 6 o'clock x: 0.283 y: 0.297 (at 9300° K) • White Chromaticity x: 0.313 y: 0.329 (at 6500° K) x: 0.313 y: 0.329 (sRGB) Upper >50° (typ.) Lower >60° (typ.) • Viewing Angle (C/R >5) Left >75° (typ.) Right >75° (typ.) • Response time <=25ms (typ.) * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes 1024 x 768 at 75Hz • Maximum • Recommended 1024 x 768 at 60Hz 14 user definable modes 11 factory preset mo
Summary of the content on the page No. 9
Product Information Resolution Mode H. freq (kHz) V. freq (Hz) PC 640*350 VGA-1 31.469 70.086 640*480 VGA VESA 60 31.469 59.940 640*480 Mac 13 35.000 66.667 640*480 VGA VESA 75 37.500 75.000 720*400 IBM VGA 3H 31.468 70.087 800*600 SVGA VESA 56 35.156 56.250 800*600 SVGA VESA 60 37.879 60.317 800*600 SVGA VESA 75 46.875 75.000 832*624 Mac 16 49.724 74.550 1024*768 XGA VESA 60 48.363 60.004 1024*768 XGA VESA 75 60.023 75.029 Video Video 60Hz 15.734 59.940 Video 50Hz 15.625 50.000 Progressive
Summary of the content on the page No. 10
Product Information Automatic Power Saving If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will then 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: Power Management Definition VESA Mode Video H-sync V-sync Power Used LED colo
Summary of the content on the page No. 11
Product Information 50K hrs (excluding CCFL 40Khrs) • System MTBF * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Pin Assignment The 15-pin D-sub connector (male) of the signal cable: Pin Pin Assignment Assignment No. No. Red video input DDC +5V 1 9 Green video input Logic ground 2 10 3 Blue video input 11 Ground Ground Serial data line (SDA) 4 12 5 Ground 13 H. Sync Red video ground V. Sync 6 14 7 Green video ground 15 Data clock line (SCL) Blue video gro
Summary of the content on the page No. 12
Product Information RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its components. Front View Product Description RETURN TO TOP OF THE PAGE Physical Function Tilt file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/product/product.htm (7 of 8) [3/2/2004 3:43:52 PM]
Summary of the content on the page No. 13
Product Information RETURN TO TOP OF THE PAGE file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/product/product.htm (8 of 8) [3/2/2004 3:43:52 PM]
Summary of the content on the page No. 14
Installing your LCD Monitor/TV Installing your LCD Monitor/TV Front View Product Description • Connecting to Your PC, TV antenna, DVD/VCR etc. • VESA Mounting and Easy Wall Mounting • Installing the Optional TV/AV Module • Getting Started • Optimising Performance Front View Product Description 1 SOURCE TV/Video source selection file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/install.htm (1 of 3) [3/2/2004 3:43:54 PM]
Summary of the content on the page No. 15
Installing your LCD Monitor/TV Increase or decrease the channel number 2 or up or down the highlighted function in OSD MENU 3 Open the OSD and select the highlighted function Increase or decrease the level of audio volume VOL 4 or move up or down the highlighted function in OSD 5 Power indicator 6 Power switch On/Off 7 Receiver for 'remote control' RETURN TO TOP OF THE PAGE Rear View file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/install.htm (2 of 3) [3/2/2004 3:43:54 PM]
Summary of the content on the page No. 16
Installing your LCD Monitor/TV For connect to "Audio Chin" only 1 DC 12V out AC power in 2 AC in D-Sub input 3 VGA 4 PC - Audio in For connect to PC Audio output 5 Audio out For connect to Audio out RETURN TO TOP OF THE PAGE Optimizing Performance ● For best performance, ensure that your display settings are set at 1024x768@60Hz (for 15"). Note: You can check the current display settings by pressing the 'MENU' button once. ● You can also install the Flat Panel Adjust (FP Adjust) prog
Summary of the content on the page No. 17
On-Screen Display On-Screen Display Description of the On-Screen Display • The OSD Guide Description of the On Screen Display What is the On-Screen Display? This is a feature offered by all Philips LCD monitors/TVs. It allows an end user to adjust screen performance of monitors directly through an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when operating the monitor. Basic and simple instruction on the control keys When you press the button
Summary of the content on the page No. 18
On-Screen Display Europe OSD Guide PC Mode INPUT SELECT Select video source for main display: ● PC VGA input PC ● Antenna or cable TV input TV ● CVBS Composite Video input AV ● S-video input S-VIDEO ● Progressive video input & YPbPr component video input HD-YPbPr LANGUAGE Set language for OSD ENGLISH DEUTSCH ITALIANO Adjust positions to get optimum display location on the ADJUST POSITION screen HORIZONTAL VERTICAL BRIGHTNESS & CONTRAST Adjust brightness and contrast to obt
Summary of the content on the page No. 19
On-Screen Display VIDEO NOISE Adjust phase and clock to obtain stable and clear display PHASE CLOCK ADJUST COLOR Set color temperature to suit personal preference ORIGINAL PANEL COLOR 9300K FOR CAD/CAM 6500K FOR IMAGE MANAGEMENT SRGB RED USER PRESET GREEN BLUE RESET TO FACTORY SETTINGS Reset the setting to default values NO YES Automatic adjustment of the display parameters to give AUTO optimum display EXIT Exit from this menu RETURN TO TOP OF THE PAGE TV/Video/HD Mode Select video so
Summary of the content on the page No. 20
On-Screen Display ● Antenna or cable TV input TV ● CVBS Composite Video input AV ● S-video input S-VIDEO ● Progressive video input & YPbPr component video input HD-YPbPr PICTURE Adjust picture characteristics to suit personal preference BRIGHTNESS CONTRAST COLOR SHARPNESS ● Normal ● Cool COLOR TEMP ● Warm EXIT SOUND Adjust audio characteristics to suit personal preference TREBLE BASS BALANCE SURROUND (ON/OFF) EXIT LANGUAGE Set language for OSD ENGLISH DEUTSCH file:/
