Summary of the content on the page No. 1
MultiSync LCD1560NX
User’s Manual
UÏivatelská pfiíruãka
Bedienerhandbuch
δηγίες ρήσης
Manual del usuario
Manuel Utilisateur
Manuale utente
Gebruikershandleiding
Podr´cznik u˝ytkownika
Руководство пользователя
Kullan∂c∂ Klavuzu
00Cover_all.p65 1 18/11/02, 11:35 am
Summary of the content on the page No. 2
For the Customer to use in U.S.A. or Canada Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouiller du Canada. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CSA C22.2 No. 950. Ce produit porte la marque ‘C-UL’ et se conforme
Summary of the content on the page No. 3
TCO’99 Congratulations! You have just purchased a Lead** TCO’99 approved and labeled product! Your choice Lead can be found in picture tubes, display screens, solders and has provided you with a product developed for capacitors. Lead damages the nervous system and in higher professional use. Your purchase has also doses, causes lead poisoning. contributed to reducing the burden on the TCO’99 requirement permits the inclusion of lead since no environment and also to the further development of rep
Summary of the content on the page No. 4
Index Warning, Caution ............................... English-1 Avviso, Attenzione .............................. Italiano-1 Declaration ......................................... English-1 Dichiarazione ..................................... Italiano-1 Contents ............................................. English-2 Contenuto .......................................... Italiano-2 Quick Start ......................................... English-2 Guida rapida ...................................... It
Summary of the content on the page No. 5
English âesky Deutsch Ελληνικά Español Français Italiano Nederlands Polski Русский Türkçe 01b_XChapterOpener 1 18/11/02, 11:35 am
Summary of the content on the page No. 6
01b_XChapterOpener 2 18/11/02, 11:35 am
Summary of the content on the page No. 7
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK • DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS IN
Summary of the content on the page No. 8
Contents Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD1560NX monitor with tilt base • Power Cord •Video Signal Cable • User’s Manual • CD ROM (includes complete User’s Manual in PDF format). To see the User’s Manual, Acrobat Reader 4.0 must be installed on your PC. User’s Manual Power Cord Video Signal Cable CD ROM * Remember to save your original box and packing material to transport or ship the monitor. Quick Start To attach the MultiSync LCD monitor to
Summary of the content on the page No. 9
Macintosh Cable Adapter Figure A.1 Figure A.2 Figure B.1 (not included) Input1 (D-Sub) Input2 (DVI) Cable cover Figure C.1 Figure C.2 Input1 (D-Sub) Input2 (DVI) Figure C.3 English-3 01_English 3 18/11/02, 11:35 am English
Summary of the content on the page No. 10
Vacation Switch Power Button Figure D.1 Raise and Lower Monitor Screen The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1). Figure RL.1 Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1). Figure TS.1 Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place hands on each s
Summary of the content on the page No. 11
4. Remove the hinge cover (Figure R.1 and Figure R.2). 5. Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure R.3) the monitor is now ready for mounting in an alternate manner. 6. Connect the AC cord, signal cable and audio cable to the back of the monitor (Figure R.4). 7. Reverse this process to reattach stand. NOTE: Use only VESA-compatible alternative mounting method. Handle with care when removing stand. Figure R.1 Figure R.2 Figure R.3 English-5 0
Summary of the content on the page No. 12
Figure R.4 NOTE: This LCD monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) when mounting. To meet the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark). Replace screws Thickness of bracket (arm) 2.0 ~ 3.2 mm Tighten all screws 75 mm 75 mm 4 SCREWS (MAX depth: 8.5 mm) If use other screw, chec
Summary of the content on the page No. 13
Controls OSM (On-Screen-Manager) Controls The OSM controls on the front of the monitor function as follows: To access OSM press any of the control buttons (<, >, -, +, EXIT). To change signal input, press the SELECT button. NOTE: OSM must be closed in order to change signal input. Control Menu EXIT Exits the OSM controls. Exits to the OSM main menu. < / > Moves the highlighted area left/right to select control menus. Moves the highlighted area up/down to select one of the controls. - / + Moves t
Summary of the content on the page No. 14
FINE Improves focus, clarity and image stability by increasing or decreasing this setting. Should the “Auto Adjust function” and the “H.Size” function do not give you a satisfactory picture setting, a fine tuning can be performed using the “Fine” function. It improves focus, clearity and image stability by increasing or decreasing this setting. For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would look like on the left drawing. The image should be
Summary of the content on the page No. 15
Information DISPLAY MODE Indicates the current display resolution and frequency setting of the monitor. MONITOR INFO. Indicates the model and serial numbers of your monitor. OSM Warning OSM Warning menus disappear with Exit button. NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or when there is a change of input signal or video is inactive, the No Signal window will appear. RESOLUTION NOTIFIER: This function gives a warning of use with optimize
Summary of the content on the page No. 16
• Image Persistence: Image persistence is when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off
Summary of the content on the page No. 17
VAROVÁNÍ CHRA≈TE ZA¤ÍZENÍ P¤ED DE·TùM A VLHKEM. ZABRÁNÍTE TAK NEBEZPEâÍ POÎÁRU NEBO ÚRAZU ELEKTRICK¯M PROUDEM. POLARIZOVANOU ZÁSTRâKU JEDNOTKY NEPOUÎÍVEJTE VE SPOJENÍ SE ZÁSUVKOU PRODLUÎOVACÍ ·≈ÒRY NEBO JIN¯MI ZÁSUVKAMI, POKUD KOLÍKY NELZE ZCELA ZASUNOUT. UVNIT¤ ZA¤ÍZENÍ SE NACHÁZÍ VYSOKONAPùËOVÉ KOMPONENTY, PROTO SK¤Í≈ NEOTEVÍREJTE. SERVIS SVù¤TE KVALIFIKOVANÉ OSOBù. UPOZORNùNÍ RIZIKO ÚRAZU ELEKTRICK¯M PROUDEM • NEOTVÍRAT UPOZORNùNÍ: Z DÒVODU SNÍÎENÍ RIZIK ÚRAZU ELEKTRICK¯M PROUDEM NEODNÍMEJTE
Summary of the content on the page No. 18
Obsah Dodávka nového monitoru LCD NEC MultiSync* by mûla obsahovat následující poloÏky: • monitor MultiSync LCD1560NX s otoãnou základnou, • napájecí ‰ÀÛra, • kabel pro video signál, • uÏivatelská pfiíruãka, • CD-ROM (zahrnuje kompletní uÏivatelskou pfiíruãku ve formátu PDF). Pro zobrazení uÏivatelské pfiíruãky musíte mít na poãítaãi nainstalovanou aplikaci Acrobat Reader 4.0. UÏivatelská pfiíruãka Napájecí ‰ÀÛra Kabel pro video signál CD-ROM * PÛvodní krabici a balicí materiál uschovejte pro pfiípad
Summary of the content on the page No. 19
Adaptér kabelu Macintosh (není Obrázek A.1 Obrázek A.2 Obrázek B.1 souãástí v˘bavy) Vstup1 (D-Sub) Vstup2 (DVI) Kryt kabelu Obrázek C.1 Obrázek C.2 Vstup1 (D-Sub) Vstup2 (DVI) Obrázek C.3 âesky-3 02_Czech 3 18/11/02, 11:36 am âesky
Summary of the content on the page No. 20
Hlavní vypínaã Tlaãítko napájení Obrázek D.1 Nastavení v˘‰ky monitoru Monitor lze zvednout nebo sníÏit. Chcete-li obrazovku posunout nahoru nebo dolÛ, uchopte monitor na obou stranách a zvednûte jej nebo spusÈte do poÏadované v˘‰ky (Obr. RL.1). Obrázek RL.1 Sklon monitoru Uchopte obû strany obrazovky monitoru a upravte sklon podle poÏadavkÛ (Obr. TS.1). Obrázek TS.1 Odebrání podstavce pfii pfiemístûní monitoru Pfiíprava monitoru na pfiemístûní: 1. Odpojte v‰echny kabely. 2. Uchopte monitor za obû st
