Summary of the content on the page No. 1
NEC Enterprise Series
®
®
MultiSync
MultiSync
™
™
E900+
E900+
User’s Manual
User’s Manual
Contents 1
Quick Start 2-3
Controls 4-6
Recommended Use 7-8
Specifications 9
Features 10
Troubleshooting 11
References 12
Limited Warranty 13
TCO’95 14-15
78133521 1 5/15/98, 2:16 PM
Summary of the content on the page No. 2
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PL
Summary of the content on the page No. 3
NEC MultiSync Monitors ® ® MultiSync MultiSync E E900+ 900+ User’s Manual User’s Manual THANK YOU FOR CHOOSING AN NEC © MultiSync MONITOR — Important — To help us in our continuing efforts to better serve and support you, and to bring you new and innovative products, please take a few moments to register your new NEC MultiSync monitor. By returning this card, we confirm your date of purchase and records the model and serial numbers. This facilitates our ability to process warranty claims,
Summary of the content on the page No. 4
Quick Start ® ™ To attach the MultiSync E900+ monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the Mac: Connect the MultiSync E900+ Macintosh cable adapter (not included) to the m
Summary of the content on the page No. 5
Quick Start Figure B.1 Power Outlet Power Cord Figure C.1 MultiSync E900+ EXIT PROCEED RESET CONTROL Figure D.1 3 78133521 5 5/15/98, 2:16 PM
Summary of the content on the page No. 6
Controls ™ OSM (On-Screen Manager) control buttons on the front of the monitor function as follows: Main Menu Sub-Menu EXIT Exits the OSM menu. Exits to the OSM controls main menu. CONTROL Moves the highlighted Moves the highlighted area / area up/down to select up/down to select one of the one of the controls. controls. CONTROL Moves the highlighted Moves the bar in the – or + –/+ area left/right to select direction to decrease or one of the controls. increase the adjustment. PROCEED Has no
Summary of the content on the page No. 7
Controls ® Color Control/AccuColor Control System Color presets 1 through 5 selects the desired color setting. The bar is replaced by the color setting choice from 1 to 5. Each color setting is adjusted at the factory to the stated Kelvin. If a setting is adjusted, the name of the setting will change from Kelvin to Custom. Red, Green, Blue: NEC's AccuColor Control System decreases or increases the monitor's red, green or blue color guns depending upon which is selected. The change in color
Summary of the content on the page No. 8
Controls ® GlobalSync Control: Eliminates picture impurities that may result from the earth’s magnetic field. Adjusting the control bar will change the display’s rotation in a clockwise or counterclockwide direction. Note: NEC recommends that you perform GlobalSync correction while running a typical application such as a spreadsheet or text document. ™ control Factory Preset: Selecting Factory Preset allows you a reset most OSM settings back to the factory settings. A warning statement will app
Summary of the content on the page No. 9
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ® ™ THE MULTISYNC E900+ COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated openings or p
Summary of the content on the page No. 10
Recommended Use CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 12 inches and no further away than 28 inches from your eyes. The optimal distance is 18 inches. • Rest your eyes periodically by fo
Summary of the content on the page No. 11
Specifications ® ™ Monitor MultiSync E900+ Notes Specifications Monitor Picture Tube Diagonal: 19 inch 90° deflection, 0.26 mm trio dot pitch, Viewable Image Size: 18.0 inch medium short persistence phosphor, Radius: 1330 mm multi-layered, anti-static screen coating, ® Invar Shadow Mask and OptiClear screen surface. Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Sync: Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Composite sync. (Positive/Negative) (TT
Summary of the content on the page No. 12
Features ® OptiClear Screen Surface: Reduces reflection and glare and increases contrast without sacrificing focus level, clarity or brightness. Along with the flat square technology CRT, a high contrast screen with 0.26 mm trio dot pitch delivers crisp, clean text and graphics. Invar Shadow Mask: Holes in the thin metal sheet behind the glass of the CRT surface correspond to each phosphor dot on the inner surface of the CRT’s faceplate, allowing the correct electron beam (red, green, blue) to h
Summary of the content on the page No. 13
Troubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Signal cable should be completely connected to display card/computer. • Check connector for bent or pushed-in pins. Image is scrolling or unstable • Signal cable should be completely attached to the computer. • Check pin assignments and signal timings of the monitor and your display card with respect to recommended timings and pin assignments
Summary of the content on the page No. 14
References • BBS (978) 635-4706 NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.4k/28.8k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support (800) 632-4662 Fax (978) 635-4298 • Electronic Channels: Internet e-mail: tech-support@nectech.com Internet ftp site: ftp.nectech.com World Wide Web: http://www.nec.com ® Windows 95 INF File: http://www.nec.com/d
Summary of the content on the page No. 15
Limited Warranty NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase. Spare parts are warranted for ninety (90) days. This warranty gives you specific legal rights and you may also have other rights which vary from state to stat
Summary of the content on the page No. 16
E R G O Y N G R O E M N I E C • S Y TCO’95 Congratulations! You have just purchased a TCO’95 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the 95 burden on the environment and also, to the further development of environmentally adapted electronics products. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for enco
Summary of the content on the page No. 17
toxins, PCBs, which are suspected to give rise to similar harm, including reproductive damage in fisheating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. TCO’95 demand requires that plastic components weighing more than 25 grams must not contain organically bound chlorine and bromine. Lead** Lead can be found in picture tubes, display screens, solders and capacitor
Summary of the content on the page No. 18
tNotest 16 78133521 18 5/15/98, 2:16 PM
Summary of the content on the page No. 19
Declaration of the Manufacturer We hereby certify that the color monitor MultiSync E900+ JC-1942UMW is in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: – EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 50082-1 (IEC-801-2) (IEC-801-3) (IEC-801-4) and marked with NEC Home Electronics, LTD. 686-1, NISHIOI OI-MACHI, ASHIGARAKAMI-GUN KANAGAWA 258-8533, JAPAN Röntgenstrahlung Die in diesem Gerät eerzeugten Rötgenstrahlen sind durch die eigensichere Kathodenstrahl
Summary of the content on the page No. 20
NEC Enterprise Series PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Technologies and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use and sales rights thereto, except to the extent said rights are expressly granted to others. The NEC Technologies product(s) discus
