Summary of the content on the page No. 1
AUTO-SCANNING WITH DIGITAL CONTROL
COLOR DISPLAY MONITOR
NFL9905STTFW
MODEL
USER’S GUIDE
For future reference, record the serial
number of your display monitor in the
space below:
Internet Home Page: http://www.mitsubishi-display.com/
SERIAL No.
®
The serial number is located on the Supplying Windows 95/98 INF File download service, new product
rear cover of the monitor. information, etc.
Summary of the content on the page No. 2
- 2 -
Summary of the content on the page No. 3
ENGLISH CONTENTS 1. INTRODUCTION ..................................................... 6 1.1 Features ........................................................ 6 CAUTION 1.2 Internal Preset Memory Capability ................ 7 The power cord provided with this monitor is de- 1.3 Power Management Function ....................... 7 signed for safety and must be used with a properly 1.4 DDC .............................................................. 7 grounded outlet to avoid possible electrical
Summary of the content on the page No. 4
RADIO INTERFERENCE REGULATIONS STATE- As an ENERGY STAR Partner, Mitsubishi Electric Corporation has determined that this product meets MENT FOR U.S.A. the ENERGY STAR guidelines for energy efficiency. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment gener- ates, uses and can
Summary of the content on the page No. 5
ENGLISH Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO’99 approved and labelled products may also be obtained via the Internet, using the address: Congratulations! http://www.tco-info.com/ You have just purchased a TCO’99 approved and labelled product! Y
Summary of the content on the page No. 6
1 INTRODUCTION 1 images. Congratulations on your purchase of the high resolution color monitor. We designed this monitor to provide you with • The monitor complies with Video Electronics Standards years of reliable trouble-free operation. TM TM Association (VESA ) DDC 1/2B(EDID) specification. If your computer is Plug & Play compliant setup will be This guide tells you how to connect, adjust and care for your done automatically. monitor. This guide also provides technical specifications and
Summary of the content on the page No. 7
ENGLISH 1.5 Location Considerations 1.2 Internal Preset Memory Capability When setting up and using the monitor, keep the following To minimize adjustment needs, the factory has preset in mind: popular display standards into the monitor, as shown in Table 1. If any of these display standards are detected, the • For optimum viewing, avoid placing the monitor picture size and position are automatically adjusted. All of against a bright background or where sunlight or the factory presets may be o
Summary of the content on the page No. 8
1.9 Quick Operation Chart 1.7 Unpacking To summarize the steps in connecting your computer After you unpack the box you should have all of the items with the color monitor and setting the necessary controls indicated in Figure 1. Save the box and packing materials and switches, refer to the chart below. in case you transport the monitor. Complete and mail in warranty cards. 23 1 Connect the color monitor and computer with the necessary cords and cables. See Section 3. INSTALLATION AND CONNE
Summary of the content on the page No. 9
ENGLISH 2 PART NAME 2 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. REAR FRONT D-SUB D-SUB Figure 4 Figure 3 2.2 Function 7. AC POWER CONNECTOR 1. POWER SWITCH: A push-on / push-off switch for AC power. 8. SIGNAL INPUT CONNECTOR (DB9-15P) 2. POWER-ON INDICATOR: This indicator illuminates green when AC power is on, and illuminates amber when the monitor is in the power mana
Summary of the content on the page No. 10
3 INSTALLATION AND 3 CONNECTION On the back of the monitor two kinds of plug-in connections 3.2.2 Connecting to An Apple Macintosh Computer are provided: AC power connector for the AC input, DB9- 15P connector for video signal input. Figure 6 shows the SC-B104 cable and AD-A205 Adapter(option) to the video port in an Apple Macintosh. 3.1 AC Power Connection The Macintosh Adapter is available that converts the 2 row One end of the AC power cord is connected to the AC D-sub video connector on leg
Summary of the content on the page No. 11
ENGLISH 4 OSD (On Screen Display) 4 FUNCTIONS 4.1 How to adjust the screen (5)Adjust by pressing or button. The monitor has an OSD(On Screen Display) function. The following procedure shows how to adjust the screen using the OSD function. (1) Turn on the monitor. (6)To turn the OSD off, press when is selected. If you don't press any button for about 12 seconds, the OSD will turn off automatically. (2) Press button to display t
Summary of the content on the page No. 12
4.2 Adjustment Items X: Available Items Function A B C CONTRAST Adjusts the contrast level. X X BRIGHT Adjusts the black level of the screen X X COLOR TEMPERATURE Adjusts the color temperature of the image on the screen. X X HORIZ-SIZE Adjusts the horizontal size of the image on the screen. X HORIZ-PHASE Adjusts the horizontal position of the image on the screen. X VERT-SIZE Adjusts the vertical size of the image on the screen. X VERT-POSITION Adjusts the vertical position of the image on the sc
Summary of the content on the page No. 13
ENGLISH Press the Minus Button Press the Plus Button Group Item Item Icon Icon To decrease the contrast. To increase the contrast. CONTRAST To decrease the brightness. To increase the brightness. BRIGHT SCREEN To increase the red color level. To increase the blue color level. COLOR TEMPERATURE To narrow the width of the image To expand the width of the image HORIZ-SIZE on the screen. on the screen. To move the image on the screen To move the image on the screen HORIZ-PHASE to the left. to the r
Summary of the content on the page No. 14
Press the Minus Button Press the Plus Button Group Item Item Icon Icon HORIZ-STATIC To adjust the horizontal beam alignment on the full screen area. VERT-STATIC To adjust the vertical beam alignment on the full screen area. To decrease the level of the moire-clear wave. MOIRE CANCEL LEVEL CORNER PURITY(TL) To adjust the purity condition on the top-left corner. CORNER PURITY(TR) To adjust the purity condition on the top-right corner. VIDEO CORNER PURITY(BL) To adjust the purity condition on the b
Summary of the content on the page No. 15
ENGLISH Before calling your Authorized Product Support, please check that the items below are properly connected or set. 5 TROUBLESHOOTING In case of using a non-standard signal, please check the 5 pin assignments and the signal timing of your computer with the specification outlined in Section 6. SPECIFICA- TIONS and Section 7. APPENDIX. ITEMS TO CHECK LOCATION PROBLEM • • Contrast and brightness controls. Front (OSD) LED On (Green) • • Power switch. Front LED Off • • AC power cord disconnected
Summary of the content on the page No. 16
ITEMS TO CHECK LOCATION PROBLEM • •– The 2 very faint thin lines across the screen are normal. Two fine horizontal They are caused by the aperture grille stabilization lines are visible on the screen. filaments(Damper Wires) which are required for all aperture grille CRTs’. Aperture Grille Shadow of Electron Gun Damper Wires Damper Wires Shadow of Damper Wires Aperture Grille Type A buzzing sound • •– A brief vibration or hum sound that is heard just after power when power on. up is normal. Th
Summary of the content on the page No. 17
ENGLISH 6 SPECIFICATIONS 6 Size 50cm/19"(46cm/18" Diagonal Viewable Image) Mask type Aperture grille Gun In-line Deflection angle 90° CRT Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0.25 -0.27mm (variable) Face Plate Anti-glare, Anti-reflection and Anti-static film Focusing method Dynamic Beam Forming (DBF) Video 0.7 or 1.0Vp-p analog RGB INPUT SIGNAL Sync Separate H, V sync., or Composite sync Input Connectors DB9-15P SIGNAL INTERFACE Input Impedance 75
Summary of the content on the page No. 18
AD-A205 MITSUBISHI ON ON 1 2 3 4 5 6 7 APPENDIX 7 7.2 SC-B104 Signal Cable 7.1 Monitor Signal Input Connector (DB9-15P) (Female) Approx. 1.8m DB9-15P MOUNTED ON THE REAR PANEL DB9-15P(Male) DB9-15P(Male) PIN ASSIGNMENTS PIN ASSIGNMENTS Pin No. Signal 1 RED VIDEO Pin No. Signal 2 GREEN VIDEO 1 RED 3 BLUE VIDEO 2 GREEN 4 GROUND 3 BLUE 5 DDC GROUND 4 GROUND 6 RED GROUND 5 DDC GROUND 7 GREEN GROUND 6 RED GROUND 8 BLUE GROUND 7 GREEN GROUND 9
Summary of the content on the page No. 19
ENGLISH (3) “AD-A205 Mac Adapter Setting Chart” shows all available modes for Macintosh systems and all possible combinations with the monitor. We recommend that you use the monitor with a preset timing. (See Section 1.2 Internal Preset Memory Capability) (4) Please refer to the instruction book of your computer about the resolution setting. Resolution may not be changed on some computers. - 19 - Set the dip switch "ON" as shown below. Exampl
Summary of the content on the page No. 20
CP871C158A10 MITSUBISHI ELECTRIC CORPORATION HEAD OFFICE: MITSUBISHI DENKI BLD, MARUNOUCHI, TOKYO 100-8310 TELEX J24532 CABLE MELCO TOKYO http://www.mitsubishi-display.com
