Lindy 25021 user manual

Summary of the content on the page No. 1

Fast Ethernet Switch
USER'S GUIDE
Twenty-Four (24) ports 100/10Mbps Fast Ethernet Switch
LINDY Part No. 25021

Summary of the content on the page No. 2

TABLE OF CONTENTS 1 UNPACKING INFORMATION ................................3 2 PRODUCT INTRODUCTION.................................4 2.1 Models...............................................................4 2.2 Key Features......................................................4 2.3 Front Panel ........................................................4 2.3.1 100/10Mbps TP Ports.................................4 2.3.2 Cabling ......................................................4 2.3.3 Status LED

Summary of the content on the page No. 3

1 UNPACKING INFORMATION Thank you for purchasing the Switch. Before continuing, please check the contents of the product package. This product package should contain the following items: One (1) Switch One (1) Power Cord Four (4) Rubber Feet (for desktop placement) One (1) Rackmount Kit This User’s Guide If anything is missing, please contact your place of purchase. For 19 inches case Power Cord Rubber Feet (for desktop placement) Rackmount Kit User’s Guide 3

Summary of the content on the page No. 4

2 PRODUCT INTRODUCTION 2.1 Models The Switch is a multi-speed, versatile network device combining both standard and "Big-Pipe" ports under the same hood. The Switch is a twenty-four (24) 100/10Mbps RJ-45 UTP/STP ports switch. 2.2 Key Features Twenty-four (24) 100/10Mbps Switch ports. Store-and-Forward technology. Auto-Negotiation support for each TP port. IEEE 802.3x Flow-Control support for Full-Duplex operation. Back-Pressure support for Half-Duplex operation. Bridging capability f

Summary of the content on the page No. 5

3 INSTALLATION The Switch is "Plug & Play". It does NOT require software configuration. Users can immediately use any of the features of this product simply by attaching the cables and turning on the power. 3.1 To locate the switch on a desktop Attach the four (4) rubber feet included in the product package to the bottom of the Switch, one in each corner. Place the Switch on a clean, flat desk or tabletop close to a power outlet. Plug in all network connections and the power cord. Turn t

Summary of the content on the page No. 6

4 HELPFUL SUGGESTIONS 4.1 Prior to Installation Before installing the Switch and connecting network devices, it is important to plan the network's layout. Things you should consider include: Dedicated Bandwidth: File servers and other high-traffic hardware improve their performance if they have their own dedicated 10Mbps or 100Mbps bandwidth. Full-Duplex: Determine which devices support Full-Duplex connections. Fast Ethernet: Make sure rules for cable lengths and categories are followed.

Summary of the content on the page No. 7

5 P o rt Sw itc h 5 4 1 3 2 5 Sample Application The optimal application for the Switch is as a "big pipe" backbone interconnecting file servers with bandwidth-hungry workgroups, departments, and offices. 8 Gigabit portsSwitch Mail Server with Gigabit Ethernet Adapter 24 100/10 ports with 2 Gigabit portsswitch 24-Po r t + 2 Gig a P o rt Swi tch File Server with Gigabit Ethernet Adapter 24 ports 100/10Mbps Fast Ethernet Switch 24 ports 100/10Mbps Fast Ethernet Switch Print er S erve r 5 ports 100

Summary of the content on the page No. 8

6 PRODUCT SPECIFICATIONS Models Twenty-Four (24) ports 100/10Mbps Fast Ethernet Switch (For 13 inches and 19 inches width) Standards 10BASE-T IEEE 802.3 100BASE-TX IEEE 802.3u Ports Twenty-four (24) 100BASE-TX Media Support 10BASE-T Category 3, 4 or 5 TP 100BASE-TX Category 5 TP Bandwidth 100BASE-TX 200/100/20/10Mbps Forwarding / 148,810 packets/second per port @ 100Mbps, max. Filtering Rate 14,881 packets/second per port @ 10Mbps, max. Latency 9 µ sec @100Mbps, minimum 70 µ sec @ 10Mbps, minimu