Summary of the content on the page No. 1
E54
Summary of the content on the page No. 2
L170_E.fm Page 2 Tuesday, February 11, 2003 12:51 AM í í í
Summary of the content on the page No. 3
Fourth Edition (July 2006) This publication could contain technical inaccuracies or typographical errors. Changes are made periodically to the information herein; these changes will be made in later editions. Lenovo may make improvements and/or changes in the product(s) and/or program(s) at any time. It is possible that this publication may contain reference to, or information about, Lenovo products (machines and programs), programming, or services that are not announced in your c
Summary of the content on the page No. 4
Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual proper
Summary of the content on the page No. 5
Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the appl
Summary of the content on the page No. 6
L170_E.fm Page 26 Tuesday, February 11, 2003 12:51 AM Further Help If you are unable to correct the problem yourself, you may seek further help as follows: Call the Customer Support Center. In the US call 1-800-426-7378 In Canada (Toronto Only) call 416-383-3344 In Canada (all others) call 1-800-565-3344 If possible, stay by your In other countries contact your dealer, retailer, or other Lenovo authorized computer. Your Technical Servicer. Support Representative may wish to go
Summary of the content on the page No. 7
Contents Packing list ----------------------------------------------------- 5 Precaution s --------------------------------------------------- 6 7 Installation Instructions ------------------------------------- Swivel Base --------------------------------------------------- 7 Power cord ----------------------------------------------------- 8 Video cable ---------------------------------------------------- 8 Operating Instructio n s ----------------------------------
Summary of the content on the page No. 8
PRECAUTIONS Workplace preparation Positioning the monitor Choose a suitable place to position the monitor where it is not near fluorescent desk lighting or any equipment that produces magnetic fields that could cause interference. Ensure that the furniture or equipment can support the weight of the monitor. Allow at least 2 in. (50 mm) ventilation space around the monitor. Height The monitor should be positioned so that the top of the screen is slightly below your eye level when you sit at your
Summary of the content on the page No. 9
Rest Take regular breaks. Vary your posture, and stand up and stretch occasionally, as prolonged use of computer workstations can be tiring. Back Sit back in the chair and use the back rest. Hands Use a light touch on the keyboard, keeping your hands and fingers relaxed. Allow a space in front of the keyboard to rest your wrists when not typing. Consider using a wristpad. Eyesight Working with monitors, in common with any prolonged close work, can be visually demanding. Look away from the screen
Summary of the content on the page No. 10
Power Source: 1. Make sure the power cord is the correct type that is required in your area. 2. This monitor has a universal power supply that allows operation in 100/120V ac or 220/240V ac voltage (No user adjustment is required) 3. Connect the power cord into your monitor’s power input socket, and then plug the other end into a 3-pin ac power outlet. The power cord can be connected to either a wall power outlet or the power outlet socket on your computer, depending on the type of power
Summary of the content on the page No. 11
OPERATING INSTRUCTIONS General Instructions The power switch is located at front panel of the monitor. Press the power switch to turn the monitor on or off. The other control knobs are located at the base of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord must be connected. • Connect the video cable from the monitor to the video card. • To turn the monitor on, press the POWER switch to ON position. The power indi
Summary of the content on the page No. 12
Notes • Do not install the monitor in a location near heat sources such as radiators or air ducts , or in a place subject to direct sunlight , or excessive dust or mechanical vibration or shock. • Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor. • For maximum protection, repackage your monitor as it was originally packed at the factory. • To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn s
Summary of the content on the page No. 13
Acr10E.pdf 2006-8-24 17:11:26 Acr10E.pdf 2006-8-24 17:11:26 ADJUSTING THE PICTURE The description for function control ICONS 1. CONTRAST Adjust the picture contrast. 2. BRIGHTNESS Adjust the picture brightness. H- CENTER Adjust the horizontal position of the picture. 3. 4. H- SIZE Adjust the picture’s horizontal size. 5. V- CENTER Adjust the vertical position of the picture. 6. V- SIZE Adjust the picture’s vertical size. Adjust the picture’s horizontal and vertical size 7. ZOOM simulta
Summary of the content on the page No. 14
FEATURES Green monitor • The monitor has a power saving function .This feature will switch off your monitor to conserve energy,after a user-specified period of inactivity. The power-saving mode is indicated by the light-emitting diode (LED) on the front panel: Signal Power Mode Cable H-Sync V-Sync Video Indicator Consumption On* Attached Yes Yes Active Green ≤ 75 W Sleep Attached No No Blank Orange ≤ 4 W Attached No No Blank Orange Power Off ≤ 2 W * 1
Summary of the content on the page No. 15
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL. This feature is designed to conserve electrical energy by reducing power consumption when there is no video input signal present.when there is no video input signal present.When there is no video input signal, this monitor, following a time-out period,will automatically switch to an OFF mode. And the LED will turn orange. Thi
Summary of the content on the page No. 16
TECHNICAL SUPPORT (FAQ) Problem & Question Possible Solution Power LED is not on *Verify that the power switch is in the ON position *Power cord must be connected No Plug & Play *Verify that the computer system is Plug & Play compatible *Verify that the video card is Plug & Play compatible *Verify that the D-15 plug pin of video cable is bent *Make sure the monitor device drivers are installed No picture *Computer power switch must be in the ON position *Computer video card must be snugly seat
Summary of the content on the page No. 17
APPENDIX A – SPECIFICATIONS CRT Size 38.1 cm (15 in.), 90º deflection, 22.5 mm neck CRT Viewable Image 35.4 cm (13.9 in.), diagonal Size Type 0.27 mm dot pitch. Video 0.7 Vpp, R,G,B Analog Input Separate Sync. TTL Level H./V.- Sync. Positive / Negative Scanning H-Frequency 30 - 69 kHz Frequency V-Frequency 50 - 120 Hz Max. Resolution 1280 x 1024 Video dot rate 110 MHz Factory Preset mode:9 User Programmable mode : 8 Power Source Universal 100 – 240 V ac, 50 Hz / 60 Hz Operating 0 to 40º C
Summary of the content on the page No. 18
Switch • Power On/Off switch • MENU Key • Contrast/ UP Key • Brightness/ Down Key • EXIT Key External Controls: Functions • Contrast • Brightness • H-Center • H-Size • V-Center • V-Size • Zoom • Pincushion • Trapezoid • Rotation • 6500°K • User Color • 9300°K • SRGB • Degauss • Moire Reduce • Recall • Exit • OSD Display Time Plug & Play DDC 2B Power Consumption* 75 W Pre-set Display Area 260 mm (10.2 in.) x 195 mm (7.7 in.) Regulatory TUV-S, NOM, CE, MPR II Compliance TÜV/GS,CULus,CCC
Summary of the content on the page No. 19
APPENDIX B – FACTORY PRESET TIMING TABLE HORIZONTAL VERTICAL STANDARD RESOLUTION FREQUENCY FREQUENCY VGA 720 × 400 31.33 kHz 70 Hz VGA 640 × 480 31.47 kHz 60 Hz VESA/75 640 × 480 37.50 kHz 75 Hz VESA/85 640 × 480 43.27 kHz 85 Hz VESA/75 800 × 600 46.88 kHz 75 Hz VESA/85 800 × 600 53.67 kHz 85 Hz VESA/75 1024 × 768 60.02 kHz 75 Hz VESA/85 1024 × 768 68.68 kHz 85 Hz VESA/60 1280 × 1024 64.98 kHz
Summary of the content on the page No. 20
Installing the Device Driver Installing the Device Driver for Windows 95 or Windows 98 To install the device driver in Microsoft® Windows®95 or Windows98, do the following: Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in Windows 95 or Windows 98. 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the Win
