Summary of the content on the page No. 1
TPC-1070
Intel Touch Panel Computer
with High Luminance 10.4"
SVGA TFT LCD
User Manual
Summary of the content on the page No. 2
Copyright The documentation and the software included with this product are copy- righted 2007 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this man- ual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accu
Summary of the content on the page No. 3
Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its prod- ucts will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper instal- lation. Advantech assumes no liability under the terms of this warranty as
Summary of the content on the page No. 4
Declaration of Conformity CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information. FCC Class A Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason
Summary of the content on the page No. 5
Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for clean- ing. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation. Drop- ping it or letting
Summary of the content on the page No. 6
20° C (-4° F) OR ABOVE 60° C (140° F). THIS COULD DAM- AGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT. 16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES ACCORD- ING TO THE MANUFACTURER'S INSTRUCTIONS. The sound pressure level at the operator's position according to IEC 704- 1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is gi
Summary of the content on the page No. 7
11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspan- nung eine Beschädigung vermieden. 12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag auslösen. 13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der ele- ktrischen Sicherheit nur von authorisiertem Servicepersonal geöff- net werden. 14. Wenn folgende
Summary of the content on the page No. 8
TPC-1070 User Manual viii
Summary of the content on the page No. 9
Contents Chapter 1 General Information ....................................... 2 1.1 Introduction ....................................................................... 2 1.2 Specifications .................................................................... 2 1.2.1 System Kernel ................................................................ 2 1.2.2 I/O Ports ......................................................................... 3 1.2.3 Safety and Environment ..............................
Summary of the content on the page No. 10
5.3.3 HORM .........................................................................38 Appendix A Serial Port Settings........................................ 40 A.1 COM1/ COM3 Connector Definition ............................. 40 A.2 COM4 Setting ................................................................. 40 Appendix B Watchdog Timer on WinCE ........................ 44 B.1 DeviceIOControl ............................................................. 44 B.2 How to Use the Control Code ...
Summary of the content on the page No. 11
Figure F.13:Plot Calibration Data ................................ 75 Figure F.14:Draw ........................................................ 76 Figure F.15:Clear Screen ............................................. 76 Figure F.16:Option ...................................................... 77 Appendix G Fuse Specifications ........................................ 80 G.1 Fuse Specifications.......................................................... 80 G.2 Fuse Replacement ...................
Summary of the content on the page No. 12
TPC-1070 User Manual xii
Summary of the content on the page No. 13
2 1 General Information Sections include: • Introduction • Specifications • LCD Specifications • Touchscreen Specifications • Power • I/O Ports Arrangement • Panel Mounting • Dimensions & Cutout CHAPTER
Summary of the content on the page No. 14
Chapter 1 General Information This chapter gives the background information about the TPC-1070. 1.1 Introduction The TPC-1070 touch panel computer is state-of-the-art HMI (Human Machine Interface). This 10.4” display operator interface is an x86-based platform with these key features: Fanless: By using a low power processor, the system does not have to rely on fans, which often are unreliable, and causes dust to circulate inside the equip- ment. Bright Display: The bright TFT LCD disp
Summary of the content on the page No. 15
1.2.2 I/O Ports 3 serial ports: RS-232 (COM1, COM3) and RS-232/422/485 (COM4) 2 RJ-45 Ethernet port: TPC-1070H-P1E, LAN 1(10/100BaseT); LAN 2(10/100/1000BaseT) TPC-1070H-C1E, LAN 1(10/100BaseT); LAN 2(10/100BaseT) 1 PS/2 port: 6-pin mini-DIN ports for keyboard and mouse 2 USB ports: compliant with USB 2.0 1 Compact Flash Slot: TypeII 1 PCI-104 1.2.3 Safety and Environment Safety FCC Class A and CE certificated BSMI certificated The front bezel is compliant with NEMA 4 Environment Operating Tempe
Summary of the content on the page No. 16
1.3 LCD Specifications TFT color LCD Display Type 10.4” Size (diagonal) 800 x 600 (SVGA) Maximum Resolution 260K Maximum colors 0.264 x 0.264 mm Pixel Pitch (W x H) -70~70° (H), -60~50° (V); CR>=10 Viewing Angle 2 400 Luminance (cd / m ) 500 Contrast Ratio -20~70° C (Ambient) Operating Temperature 2 CCFL Backlight 50,000 hours Backlight Life Time Note There might be several bright or dark pixels on the LCD. This comes from the production of the LCD. Such phenomenon is claimed to be normal a
Summary of the content on the page No. 17
1.4 Touchscreen Specifications Resistive Touchscreen Type Tempered Glass Base Glass Construction 1024 x 1024 Resolution 75% typical Light Transmission RS232 Interface Controller 3.3 to 5V Power Rating 100 million touches Durability 1.5 Power Input voltage: 18 ~ 32 Vdc (the fuse will be open circuit as input level exceeds 33Vdc) Typical: 24V@2.5A (60W) 5 Chapter 1
Summary of the content on the page No. 18
1.6 I/O Port Arrangement The arrangement of the I/O ports is shown in Figure 1.1. Figure 1.1: I/O port arrangement TPC-1070 User Manual 6
Summary of the content on the page No. 19
1.7 Panel Mounting 1. There is a piece of adhesive waterproof gasket on the Mg-AL front bezel. Make sure the waterproof gasket is in position before installing the TPC-1070 to the panel opening. 2. Install the TPC-1070 to the panel opening. 3. Find out the eight clampers and eight long screws in the accessory pack. Hook those clampers to those holes around the four sides of the bezel. Insert the screws to every clamper and fasten them. These screws will then push on the mounting
Summary of the content on the page No. 20
1.8 Dimensions & Cutout Weight:: 3.5 Kg (without HDD) Dimensions: 286 x 226 x 58mm (WxHxD) Cutout: 279.5 x 219.5 mm (suggested) Figure 1.3: Dimensions TPC-1070 User Manual 8
