Summary of the content on the page No. 1
HP LE1851w, LE1851wl, LE1851wt,
LE2001w, LE2001wl, and LE2001wm
LCD Monitors
User Guide
Summary of the content on the page No. 2
© 2009, 2010 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services . Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions conta
Summary of the content on the page No. 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supp
Summary of the content on the page No. 4
iv About This Guide ENWW
Summary of the content on the page No. 5
Table of contents 1 Product Features ............................................................................................................... 1 HP LCD Monitors ..................................................................................................................... 1 2 Safety and Maintenance Guidelines .................................................................................. 2 Important Safety Information .............................................................
Summary of the content on the page No. 6
Identifying Monitor Conditions ................................................................................................. 25 Sleep Timer Mode .................................................................................................................. 26 sRGB Support ........................................................................................................................ 27 Changing the Color Temperature .................................................................
Summary of the content on the page No. 7
HP Recycling Program ............................................................................................. 40 Chemical Substances ............................................................................................... 40 Restriction of Hazardous Substances (RoHS) ............................................................... 40 Turkey EEE Regulation ............................................................................................. 41 Appendix D LCD Monitor Quality an
Summary of the content on the page No. 8
viii ENWW
Summary of the content on the page No. 9
1 Product Features HP LCD Monitors The LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) panel. The monitor models and features include: ● Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side ● Tilt capability ● Removable pedestal base for flexible monitor panel mounting solutions ● Video signal input to support VGA analog with VGA signal cable provided ● Video signal input to support DVI digital with DVI signal cab
Summary of the content on the page No. 10
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 38 in Appendix C. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an important
Summary of the content on the page No. 11
● Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device. ● Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor
Summary of the content on the page No. 12
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. Attaching the Monitor Base 1. Set the base on a flat surface such as a table top. 2. Using both hands, position the pedestal over the base and press down firmly to lock it in place. Be sure the base is securely locked in place and adjust the tilt angle to the desired position. CAUTION: Do not touch the surface of the
Summary of the content on the page No. 13
Rear Components Figure 3-2 LE1851w, LE1851wl, LE1851wt, LE2001w, and LE2001wl Rear Components Table 3-1 LE1851w, LE1851wl, LE1851wt, LE2001w, and LE2001wl Rear Components Component Function 1 AC Power Connector Connects the AC power cord to the monitor. 2 DC Connector (LE1851wt Connects the DC to DC cable to the monitor and MultiSeat only) Computing device. 3 VGA Connector Connects the VGA cable to the monitor. Figure 3-3 LE2001wm Rear Components Table 3-2 LE2001wm Rear Components Component
Summary of the content on the page No. 14
Connecting the Cables WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the equipment by unplugging the power cord from the electrical outlet. For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally
Summary of the content on the page No. 15
LE1851wt Model (Connecting for MultiSeat Computing) 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect the VGA signal cable to the VGA connector on the rear of the monitor and the other end to the VGA connector on the T150 multiseat computing device. 3. Connect one end of the USB cable (not provided) to the USB connector on the monitor and connect the other end to a USB connector on the computer. 4. Connect one end of the DC to DC cable to the DC OUT con
Summary of the content on the page No. 16
LE2001wm Model 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect a VGA signal cable or DVI-D signal cable. NOTE: The monitor is capable of supporting either analog or digital input. The video mode is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected by pressing the +/Source button on the front panel or through the On-Screen Display (OSD) feature by pressing the
Summary of the content on the page No. 17
Adjusting the Monitor Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 3-7 Tilting the Monitor Turning on the Monitor 1. Press the power button on the computer to turn it on. 2. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you should always activate a sc
Summary of the content on the page No. 18
CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. 1. Disconnect and remove the signal and power cables from the back of the monitor. 2. Lay the monitor face down on a flat surface. 3. Remove the four screws on the back of the monitor that connect the monitor panel to the pedestal base (1) and slide the pedestal base from the monitor panel (2). Figure 3-8 Removing the Pedestal Base 10 Chapter 3 Setting
Summary of the content on the page No. 19
4. To attach the monitor to a swing arm, insert four 10mm screws through the holes on the swing arm plate and into the mounting holes on the monitor. Figure 3-9 Installing the Monitor on a Swing Arm To attach the monitor to other mounting fixtures, follow the instructions included with the mounting fixture to ensure that the monitor is safely attached. CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a third-party mounting solution to the monitor, four
Summary of the content on the page No. 20
Mounting the MultiSeat Computing Device to the Monitor (Sold Separately) You can connect a multiseat computing device to the rear of the LE1851wt model only. 1. Install the bracket for the multiseat computing device to the rear of the monitor using the two 10mm screws provided. Install the screws in the upper two VESA mounting holes. Figure 3-10 Installing the MultiSeat Computing Device Bracket 12 Chapter 3 Setting Up the Monitor ENWW
