Summary of the content on the page No. 1
HP Compaq LE1902x, LE2002x,
LE2002xm, and LE2202x LED Backlit
LCD Monitors
User Guide
Summary of the content on the page No. 2
© 2011 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained he
Summary of the content on the page No. 3
About This Guide This guide provides information on monitor features, setting up the monitor, and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supplemental information. ENWW iii
Summary of the content on the page No. 4
iv About This Guide ENWW
Summary of the content on the page No. 5
Table of contents 1 Product Features ............................................................................................................................................ 1 HP LCD Monitors ................................................................................................................................. 1 2 Setting Up the Monitor ................................................................................................................................... 3 Attaching t
Summary of the content on the page No. 6
vi ENWW
Summary of the content on the page No. 7
1 Product Features HP LCD Monitors The LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) panel. The monitor models and features include: ● LE1902x model, 47.0 cm (18.5-inch) diagonal viewable area display with 1366 x 768 resolution, plus full-screen support for lower resolutions; includes custom scaling for maximum image size while preserving original aspect ratio ● LE2002x and LE2002xm models, 50.8 cm (20-inch) diagonal viewable area display with 1600 x 900
Summary of the content on the page No. 8
● Intelligent Management AssetControl ● Compliant with the following regulated specifications: ◦ European Union CE Directives ◦ Swedish TCO Requirements 2 Chapter 1 Product Features ENWW
Summary of the content on the page No. 9
2 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. Attaching the Monitor Base 1. Lift the base from the monitor box and set it on a flat surface such as a table top. 2. Using both hands, lift the monitor from its box, position the pedestal over the base, and press down firmly to lock it in place. Be sure the base is securely locked in place and adjust the tilt angle t
Summary of the content on the page No. 10
Rear Components Figure 2-2 Rear Components Component Function 1 AC Power Connector Connects the AC power cord to the monitor. 2 Audio Connector (select Connects the audio cable to the monitor. models) 3 DVI-D (select models) Connects the DVI-D cable to the monitor. 4 VGA Connects the VGA cable to the monitor. 4 Chapter 2 Setting Up the Monitor ENWW
Summary of the content on the page No. 11
Connecting the Cables 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Remove the cable management clip from the pedestal by pulling outward on the two sides of the clip (1) then lifting the clip off the pedestal (2). Figure 2-3 Removing the Cable Management Clip 3. Connect a VGA signal cable or DVI-D signal cable (select models). NOTE: The monitor is capable of supporting either analog or digital input (select models). The video mode is determined by the vid
Summary of the content on the page No. 12
5. Connect one end of the power cord to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet. Figure 2-4 Connecting the Cables WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the equipment by unplugging th
Summary of the content on the page No. 13
Front Panel Controls Figure 2-6 Monitor Front Panel Controls Table 2-1 Monitor Front Panel Controls Control Function 1 Menu Opens, selects or exits the OSD menu. 2 Minus If the OSD menu is on, press to navigate backward through the OSD menu and decrease adjustment levels. If the OSD menu is inactive, press to activate the volume adjustment bar. Press - or + to adjust the volume (select models). 3 Plus/source If the OSD menu is on, press to navigate forward through the OSD menu and increase adj
Summary of the content on the page No. 14
Adjusting the Monitor Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 2-7 Tilting the Monitor Turning on the Monitor 1. Press the power button on the computer to turn it on. 2. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you should always activate a sc
Summary of the content on the page No. 15
Removing the Monitor Pedestal Base You can remove the monitor panel from the pedestal base to install the panel on a wall, a swing arm, or other mounting fixture. CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. 1. Disconnect and remove the signal and power cables from the monitor. 2. Lay the monitor face down on a flat surface covered by a clean, dry cloth. 3. Remove the four pedestal neck screws (1) a
Summary of the content on the page No. 16
2. To attach the monitor to a swing arm, insert four 10mm screws through the holes on the swing arm plate and into the mounting holes on the monitor. Figure 2-9 Mounting the Monitor To attach the monitor to other mounting fixtures, follow the instructions included with the mounting fixture to ensure that the monitor is safely attached. 3. Reconnect the cables to the monitor panel. Installing a Cable Lock You can secure the monitor to a fixed object with an optional cable lock available from HP.
Summary of the content on the page No. 17
3 Finding More Information Refer to the HP LCD Monitors Reference Guide included on the CD with your monitor for additional information on: ● Optimizing monitor performance ● Safety and maintenance guidelines ● Installing software from the CD ● Using the OSD menu ● Downloading software from the Web For additional information on using and adjusting your monitor, go to http://www.hp.com/support. Select your country or region, select Product Support & Troubleshooting, and then enter your monitor mo
Summary of the content on the page No. 18
4 Technical Specifications NOTE: All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. LE1902x Model Table 4-1 LE1902x Specifications Maximum Weight (Unpacked) 2.8 kg 6.17 lbs Dimensions (include base) 33.89 cm 13.34 inches Height 12.6 cm 4.96 inches Depth 44.93 cm 17.69 inches Width Maximum Graphic Resolution 1366 x 768 (60 Hz) analog input 1366 x 768 (60 Hz) digital input Optimum Graphic Resolution
Summary of the content on the page No. 19
LE2202x Model Table 4-3 LE2202x Specifications Maximum Weight (Unpacked) 3.6 kg 7.94 lbs Dimensions (include base) 37.9 cm 14.92 inches Height 16 cm 6.3 inches Depth 51.8 cm 20.39 inches Width Maximum Graphic Resolution 1920 x 1080 (60 Hz) analog input 1920 x 1080 (60 Hz) digital input Optimum Graphic Resolution 1920 x 1080 (60 Hz) analog input 1920 x 1080 (60 Hz) digital input Power Source 100 – 240 VAC 50/60 Hz Input Terminal One VGA connector with cable included; one DVI connector with ca
Summary of the content on the page No. 20
Table 4-5 Factory Preset Modes (continued) 2 720 × 400 31.469 70.087 3 800 × 600 37.879 60.317 4 1024 × 768 48.363 60.004 5 1280 × 720 45.00 59.94 6 1280 × 1024 63.981 60.02 7 1440 × 900 55.935 59.887 8 1600 × 900 55.935 59.887 LE2202x Model Table 4-6 Factory Preset Modes Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz) 1 640 × 480 31.469 59.940 2 720 × 400 31.469 70.087 3 800 × 600 37.879 60.317 4 1024 × 768 48.363 60.004 5 1280 × 720 45.00 60.00 6 1280 × 1024 63.981 60.02 7 1440 × 900 55.9
