Summary of the content on the page No. 1
HP 2310t and 2310ti LCD Touch Monitors
User Guide
Summary of the content on the page No. 2
© 2010 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services . Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained h
Summary of the content on the page No. 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supp
Summary of the content on the page No. 4
iv About This Guide ENWW
Summary of the content on the page No. 5
Table of contents 1 Product Features ............................................................................................................................................ 1 HP 2310t and 2310ti Models ................................................................................................................ 1 2 Safety and Maintenance Guidelines .............................................................................................................. 2 Important Safety Informatio
Summary of the content on the page No. 6
Using the Touch Screen ..................................................................................................................... 17 Using the Auto-Adjustment Function .................................................................................................. 19 Front Panel Controls .......................................................................................................................... 20 Adjusting the Monitor Settings .........................................
Summary of the content on the page No. 7
Disposal of Waste Equipment by Users in Private Household in the European Union ..... 40 HP Recycling Program ...................................................................................................... 40 Chemical Substances ........................................................................................................ 40 Restriction of Hazardous Substances (RoHS) ................................................................... 40 Turkey EEE Regulation ....................
Summary of the content on the page No. 8
viii ENWW
Summary of the content on the page No. 9
1 Product Features HP 2310t and 2310ti Models The HP LCD touch screen monitors have a wide aspect active matrix thin-film transistor (TFT) panel. The monitors feature: ● 58.42 cm (23-inch) diagonal viewable area display with 1920 x 1080 resolution, plus full-screen support for lower resolutions Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side ● ● 55 degree tilt capability for use while in a standing position ● Removable pedestal and Video Electronic
Summary of the content on the page No. 10
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to Power Cord Set Requirements on page 39. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an important safety feature. •
Summary of the content on the page No. 11
cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device. ● Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord. Turn the monitor off when not in use. You can substantially increase the life expectancy of the ● monitor by using a screen saver program and turning off the monitor when not
Summary of the content on the page No. 12
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. Rear Components HP 2310t Model Figure 3-1 2310t Rear Components Table 3-1 2310t Rear Components Component Function 1 Cable Lock Provision Provides slot for use with cable security locks. 2 AC Power Connector Connects the AC power cord to the monitor. 3 Audio Connector Connects the audio cable to the monitor. 4 HDMI
Summary of the content on the page No. 13
HP 2310ti Model Figure 3-2 2310ti Rear Components Table 3-2 2310ti Rear Components Component Function 1 Cable Lock Provision Provides slot for use with cable security locks. 2 AC Power Connector Connects the AC power cord to the monitor. 3 Audio Connector Connects the audio cable to the monitor. 4 DVI-D Connector Connects the DVI-D cable to the monitor. 5 VGA Connector Connects the VGA cable to the monitor. 6 USB Upstream Connector Connects the monitor USB cable to a host computer for touch sc
Summary of the content on the page No. 14
Routing the Cables Before connecting the cables, route them through the cable routing hole in the center of the stand. Figure 3-3 Routing Cables Connecting the Cables CAUTION: Before connecting cables to the monitor, ensure that the computer and the monitor are powered off. Connecting the VGA (Analog) Video Cable (HP 2310ti Model Only) For analog operation, connect one end of a VGA signal cable (sold separately) to the VGA connector on the rear of the monitor and the other end to the VGA connec
Summary of the content on the page No. 15
Connecting the DVI-D (Digital) Video Cable For DVI digital operation, connect one end of the provided DVI-D signal cable to the DVI connector on the rear of the monitor and the other end to the DVI connector on the computer. Figure 3-5 Connecting the DVI-D Cable Connecting the HDMI (Digital) Video Cable (HP 2310t Model Only) For HDMI digital operation, connect one end of an HDMI signal cable (sold separately) to the rear of the monitor and the other end to a computer or other device with an HDM
Summary of the content on the page No. 16
Connecting the Audio Cable Connect one end of the provided audio cable to the Audio In connector on the rear of the monitor and the other end to the Audio Out connector on the computer. NOTE: If you connect an HDMI cable (2310t model only) between the monitor and computer, you do not need to connect the audio cable. The HDMI cable supports audio and video digital signals. Figure 3-7 Connecting the Audio Cable Connecting the USB Cable Connect one end of the provided USB cable to the USB upstream
Summary of the content on the page No. 17
Connecting the Power Cord Connect one end of the power cord to the AC power connector on the rear of the monitor, and the other end to an electrical wall outlet. Figure 3-9 Connecting the Power Cord WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the
Summary of the content on the page No. 18
2. Adjust the tilt by moving the top edge of the monitor either toward or away from you, without touching the screen. The monitor will tilt forward 5 degrees and back 55 degrees. Figure 3-10 Adjusting the Tilt 10 Chapter 3 Setting Up the Monitor ENWW
Summary of the content on the page No. 19
Keyboard Parking If you need more space on your desktop, place the keyboard under the monitor when not in use. Figure 3-11 Keyboard Parking Turning on the Monitor 1. Press the power button on the computer to turn it on. 2. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you should always activate
Summary of the content on the page No. 20
Removing the Monitor Pedestal Base You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing arm, or other mounting fixture (purchased separately). CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. Also disconnect the USB and audio cables if they are connected to the monitor. 1. Disconnect and remove all cables from the back of the monitor. 2. Lay the monitor face down
