Summary of the content on the page No. 9
Using On Screen Display (OSD) Functions 1 Display main menu. Exit from OSD menu. 2 Auto adjust the image when not in main menu. Confirm the selection. or Select the desired item when in OSD menu. When not in OSD menu, it is to immediately activate Contrast/ Brightness. It should be change to Contrast/ Brightness by pressing button 2. ▼ + ▲ Recall both of Contrast and Brightness. 1 + ▼ Power Lock (when not in OSD menu) 1 + ▲ OSD Lock (when not in OSD menu) Main Menu 4
Summary of the content on the page No. 10
Short Cuts Function from the button(s) Auto Adjust : To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast : To adjust the foreground white level of screen image. : increase contrast, : decrease contrast. Brightness : To adjust the luminance of the video. : increase brightness, : decrease brightness. Color Adjust : To select the color for improving brightness and color saturation between cool, normal, warm, a
Summary of the content on the page No. 11
Sharpness : To adjust the clarity of a non-SXGA (1280x1024) signal with or button. Setup Menu : To set up Language Select, Resolution Notice, OSD Position, OSD Time Out, and Input Select (Analog). Language Select : To allow users to choose from available languages. Resolution Notice : Resolution Notice is to remind you set the best quality for the image. Choose “Enable” : Every 30 seconds, it will show a window “ For best picture quality change resolution to 1280 x 1024” t
Summary of the content on the page No. 12
Supporting Timing Modes VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 768 @ 75Hz VESA 1280 x 1024 @ 60Hz VESA 1280 x 1024 @ 75Hz Warning : Do not set the graphic card in your computer to exceed these maximum refresh rates. Doing so may result in permanent dam
Summary of the content on the page No. 13
Technical Information Technical Specification LCD Panel 19.0” TFT Power Management Energy Star compliant VESA DPMS compatible < 2 W Displayable Resolution SXGA 1280 x 1024 max. Vertical Frequency 75Hz max. Pixel Dimension 0.294 x 0.294 mm LCD Display Color 16.2M (6 bits + FRC/ color) Tilt 0°~20° Active Display Area 376 mm x 301mm Temperature Operating: 0°C ~ +40°C Storage: -20°C ~ + 60°C Compliance UL, TUV/GS, CE, FCC-B, Energy Star,TUV/Ergo, TCO03 Power Input Voltage AC1
Summary of the content on the page No. 14
Care and Maintenance Care Avoid exposing your monitor directly to sunlight or other heat source. Place your monitor away from the sun to reduce glare. Put your monitor in a well ventilated area. Do not place any heavy things on top of your monitor. Make certain your monitor is installed in a clean and moisture-free area. Keep your monitor away from magnets, motors, transformers, speakers, and TV sets. Note Move the LCD out of the package and take off the plastic bag and P
Summary of the content on the page No. 15
Wrong or abnormal colors If any colors (red, green, blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection. Connect the monitor to another computer. According to WEEE regulation , this monitor can't be handled as normal trash in Europe when it is out of usage. Please refer to the recycle information from our website to handle it. 10
Summary of the content on the page No. 1
19 inch TFT LCD Monitor
JC199D
USER’S MANUAL
Summary of the content on the page No. 2
Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO’03 Display requirements: Ergonomics Good visual ergonomics and image quality in order to i
Summary of the content on the page No. 3
Recycling Information We, the Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, which can be re-decomposed and re-integrated into brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned substances. We strongly encourage you to contact the provi
Summary of the content on the page No. 4
Operation Instructions Thank you for purchasing this monitor, a high-resolution multi-scan color monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installati
Summary of the content on the page No. 5
Content Safety Precautions.............................................................................1 First Setup .........................................................................................2 Quick Installation................................................................................2 Front View of the Product ..................................................................3 Rear View of the Product ..................................................................
Summary of the content on the page No. 6
Safety Precautions This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS: This monitor should be operated only at the correct power sources indicated on the label on the rear end of the monitor. If you’re unsure of the power supply in your residence, con
Summary of the content on the page No. 7
First Setup Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories : Power cable. D-Sub cable (15 pin) DVI cable (24 pin)(Optional) Audio cable. User guide. Quick Installation 1. Connect video cable (D-Sub cable) Make sure both monitor and computer are powered OFF. Connect the video cable (D-Sub cable) to the computer, then to the monitor. 2. Connect DVI cable Connect the DVI cable from DVI output of computer to
Summary of the content on the page No. 8
Front View of the Product ➊ ➋ ➌➍ ➎➏ ➊ OSD TURN ON/OFF ➍ CONFIRM SELECTION ➋ SCROLL DOWN/DECREASE ➎ POWER ON/OFF ➌ SCROLL UP/INCREASE ➏ LED INDICATOR Rear View of the Product ➐ ➑ ➓ ➒ ➐ POWER INPUT ➒ DVI INPUT (DVI 24 PIN) ➑ AUDIO INPUT ➓ VGA INPUT (D-SUB 15 PIN) 3
