Summary of the content on the page No. 1
� � � � �
� � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � �
� � � � � � � � � � � � � � � �
Summary of the content on the page No. 2
Table of Contents FCC & Safety Information ...................................................................3 Important Safety Instructions .............................................................4 1 - Welcome ..........................................................................................5 Unpacking your LCD TV .................................................................................................5 Rear Panel Overview ..................................................
Summary of the content on the page No. 3
FCC & Safety Information FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Howe
Summary of the content on the page No. 4
Important Safety Instructions • Read instructions - All operating instructions must • When relocating the product placed on a cart, it be read and understood before the product is must be moved with utmost care. Sudden stops, operated. excessive force and uneven floor surface can cause the product to fall from the cart. • Keep this manual in a safe place - These safety and operating instructions must be kept in a safe • Ventilation - The vents and other openings in place for future referenc
Summary of the content on the page No. 5
1 - Welcome Unpacking your LCD TV 1. LCD TV 2. Remote Control 3. AAA Batteries (2) P O W E R I N P U T 1 2 3 4 5 6 7 8 9 DISPLA Y J U M P 10+ 0 CH+ F A VORITES VOL- M E N U VOL + ENTER RETURN MUT E CH- C H A N N E L PICTUR E SEARCH ASPECT AUDI O MODE CAPTIONS 4. Power Cable 5. VGA Cable 6. TV Tuner 9. User’s Guide & 7. AV Cable 8. RF Cable Registration Card 5
Summary of the content on the page No. 6
1 - Welcome (cont.) Rear Panel Overview Push arrow mark to open cover. 8 9 10 5 7 1 2 3 4 6 1 AC In 6 Audio In Connects to the Audio Out of your AV Connects to the supplied power cable. equipment when using the Component Video connections. 2 Video In Connects to the Video Out of a DVD player, 7 RF In VCR, or other AV equipment. Connects to an Antenna, Cable TV jack, Cable Box, or Satellite Receiver using an 3 S-Video In RF cable. Connects to the S-Video Out of a DVD player, VCR, or ot
Summary of the content on the page No. 7
1 - Welcome (cont.) Remote Control Overview 1 POWER POWER INPUT Turns TV on and off. 1 10 2 0-9/10+ 1 2 3 Selects channels directly. 2 4 5 6 3 DISPLAY Displays TV status. 7 8 9 DISPLA Y 3 10+ JUMP 0 1 1 4 CH+/- CH+ Selects next or previous channel. F A VORITES 4 12 5 VOL+/- MENU Adjusts volume. VOL- VOL+ ENTER 5 6 RETURN 13 Returns to previous menu or exits menu RETURN MUTE CH- system. 6 14 7 ASPECT 7 CHANNEL PICTURE SEARCH ASPECT AUDIO MODE Sets TV aspect ratio to 4:3 (standard) or 8 15
Summary of the content on the page No. 8
1 - Welcome (cont.) TV Control Overview You can also use the buttons on top of the unit for basic TV functions, including: • INPUT CHANNEL VOLUME ENTER • EXIT • CHANNEL / AUT O MENU INPUT EXIT UP DOWN - + • VOL / • MENU/ENTER • POWER These buttons have the same functions as the corresponding buttons on the remote control (see page 7). NOTE: If you have a PC connected to the LCD TV, press the AUTO button to automatically adjust the PC display to fit the LCD screen. 8
Summary of the content on the page No. 9
CHANNEL VOLUME ENTER MENU AUT O INPUT EXIT UP DOWN - + 2 - Getting Started Step 1 - Insert Remote Control Batteries Install the supplied batteries as shown below, paying attention to the correct polarities. In Out IR Sensor Power LED - + - + Point the remote control directly at the IR sensor located on the front of the TV. Caution • Do not expose the remote control to severe shock or vibration. • Do not expose the remote control to liquids, or in an area with high humidity. • Do not place the
Summary of the content on the page No. 10
2 - Getting Started (cont.) Step 2 - Connect Power Cable 1 Connect the supplied power cable to the AC In jack on the back of the LCD TV. 2 Plug the power cable into a standard AC outlet. Caution • Always turn the the LCD TV off when connecting the power cable. • Always unplug the power cable from the LCD TV and power outlet when not using the TV for a long period of time. • The LCD TV has a universal power supply that allows operation with either 100/120V AC or 220/240VAC voltage. No user-adju
Summary of the content on the page No. 11
2 - Getting Started (cont.) Step 4 - Turn on TV Press POWER on the remote control. • The Power indicator will turn green. • Press POWER again to turn off the TV. Step 5 - Search for Channels Press SEARCH on the remote control. • The LCD TV will automatically search for all available channels. • To change the tuning band, see TV setup. • To add or delete channels, see TV setup. Step 6 - Select Channels To select a channel, use the CH /buttons, or enter a 1-, 2- or 3 -digit number as follows: To
Summary of the content on the page No. 12
2 - Getting Started (cont.) Step 8 - Adjust Screen Angle To set the LCD TV to a comfortable viewing 0 5 0 angle, tilt the screen up to 5 degrees forward or 20 20 degrees backward. Step 9 - Connect Optional Wall Mount 1 Remove the supplied stand as shown. 2 Attach the LCD TV to a standard VESA Arm wall mount (100 x 100 mm). 12 0 5 0 20
Summary of the content on the page No. 13
3 - Advanced Settings Color Menu System Overview Press MENU/ENTER to display the Color Press the MENU/ENTER button to view the Menu, then press / to select from the five main menu categories: following options: • PC • TV • Video • OSD OSD Audio • Audio Depending on the input you are viewing, one or more of these options will be dimmed. • 6500K/7500K/9300K - Press / to select the desired color temperature. PC Settings • User - For a custom color temperature, If you are using the LCD TV
Summary of the content on the page No. 14
3 - Advanced Settings (cont.) Picture TV Settings Press MENU/ENTER to display the Picture The TV settings menu allows you to adjust Menu, then press / to select from the channels, picture settings, timers, V-Chip following options: ratings, closed captions, and more. 1 Press INPUT until the current channel number appears in the upper right-hand corner (TV mode). 2 Press MENU/ENTER to display the main menu. 3 Press / to select TV and press MENU/ • Picture Mode - Press / to select EN
Summary of the content on the page No. 15
3 - Advanced Settings (cont.) • Video N.R. (Noise Reduction) - Press Video Settings / to select Off, Low (minimum If you have connected an audio/video device, noise reduction), Med (moderate noise such as a DVD player or VCR, to the AV inputs, reduction), or High (maximum noise reduction). you can use the Video menu to adjust picture settings, V-Chip ratings, closed captions, and Sleep Timer more. • Press / to have the TV turn off automatically in 30, 60, or 90 minutes 1 Press INPUT
Summary of the content on the page No. 16
3 - Advanced Settings (cont.) V-Position OSD Settings • Press / to move the menu up and The OSD (On-Screen Display) menu allows down. you to set the language, position, size, and OSD Timeout style of the on-screen menu system. • Press / to set how long the menu will be displayed before it times out 1 Press INPUT to select any active input. (disappears from the screen). • The menu system will only display if there is a signal detected for the selected OSD Size input. • Press / to se
Summary of the content on the page No. 17
3 - Advanced Settings (cont.) Balance Audio Settings • Press / to set the balance between The Audio menu allows you to set the LCD the TV’s left and right speakers. TV volume level, balance, bass, treble, and Bass loudness. • Press / to set the bass level. 1 Press INPUT to select any active input. Treble • The menu system will only display if • Press / to set the treble level. there is a signal detected for the selected input. Loudness 2 Press MENU/ENTER to display the main • Press
Summary of the content on the page No. 18
4 - Help Troubleshooting Symptom Solution No picture or sound. • Ensure power cable is properly inserted in power outlet. • Ensure power is on. • Ensure correct input is selected. No sound. • Ensure volume is turned up. • Ensure sound is muted. • Ensure headphones are not connected. • Ensure input source is connected. Noisy picture and sound. • Ensure antenna cable is properly connected. • Ensure input source is properly connected. Picture is not clear. • Ensure antenna is properly orient
Summary of the content on the page No. 19
4 - Help (cont.) Technical Specifications Front Panel Controls Mode selector: (PC/TV/Video/S-Video/YCbCr), Channel Search, Input, Return, Ch+/-,Vol /-, Menu /Enter, Power Remote control IR remote Audio System Stereo 3W + 3W speakers OSD Controls (PC) Contrast, Brightness, H-Position, V-Position, Phase (Pixel Adj), Recall Defaults, Auto Adjust, Information, Clock, 6 Languages, OSD Position, OSD Timeout, Volume, Mute OSD Controls (TV/Video) Channel Edit, Auto Scan, Stereo, 5 Languages, Sharp
Summary of the content on the page No. 20
4 - Help (cont.) Power Saving Mode (PC only) The LCD TV is equipped with a power management function which automatically reduces power consumption in three power saving modes when not in use. Horizontal STATE LED POWER Vertical SYNC. SYNC. ON Green < 70W ON ON STANDBY Amber < 4W OFF ON OFF Amber < 4W OFF OFF Compatible PC Video Mode Mode Resolution H. Freq. (KHz) Band Width (MHz) 1 VGA 720 x 400 31.47 KHz 70 Hz 2 VGA 640 x 480 31.47 KHz 60 Hz 3 MAC 640 x 480 35.00 KHz 67 Hz 4 VESA
