Summary of the content on the page No. 1
English
Monitor
Operating Manual
SCENICVIEW A17-2 / A19-1 /
A17-2 DVI / A19-1 DVI /
RE17-1 DE / RE19-1 DE
Summary of the content on the page No. 2
Are there ... ... any technical problems or other questions which you would like to be clarified? Please contact our help desk (see Warranty Booklet). The latest information on our products, tips, updates, etc., can be found on the internet at: www.fujitsu-siemens.com
Summary of the content on the page No. 3
Summary of the content on the page No. 4
This manual was produced by cognitas. Gesellschaft für Technik-Dokumentation mbH – www.cognitas.de Published by Fujitsu Siemens Computers GmbH Order No.: A26361-K1063-Z121-1-7619 Edition 1 AG 0106 01/06
Summary of the content on the page No. 5
SCENICVIEW A17-2 / A19-1 / A17-2 DVI / A19-1 DVI / RE17-1 DE / RE19-1 DE Operating Manual January 2006 edition
Summary of the content on the page No. 6
VESA, DDC and DPMS are registered trademarks of Video Electronics Standards Association. All rights, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole, are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved. This manual was produced by cognitas. G
Summary of the content on the page No. 7
Contents Introduction........................................................................................................................................... 1 Notational conventions ................................................................................................................. 2 Important notes..................................................................................................................................... 2 Safety notes............................
Summary of the content on the page No. 8
Summary of the content on the page No. 9
Introduction Your new LCD (Liquid Crystal Display) monitor offers numerous features and functions, for example: ● TFT display (Thin Film Transistor; active matrix) ● minimal space requirements thanks to slim casing ● optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) ● high degree of brightness and good contrast ● presentation of up to 16.2 million colours (in conjunction with an appropriate graphics card)
Summary of the content on the page No. 10
Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. ! Supplementary information, remarks, and tips follow this symbol. i ► Text which follows this symbol describes activities that must be performed in the order shown. "Quotation marks" indicate names of chapters or terms. T
Summary of the content on the page No. 11
● Lay all cables so that nobody can stand on them or trip over them. When attaching the device, observe the relevant notes in the "Connecting the monitor" chapter. ● No data transfer cables should be connected or disconnected during a thunderstorm. ● Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get inside the device (danger of electric shock, short circuit). ● The device is not waterproof! Never immerse the device in water and protect it from spray wate
Summary of the content on the page No. 12
Transport ● Transport the monitor with care and only in its original packaging or another corresponding packaging fit to protect it against knocks and jolts. ● Never drop the LCD monitor (danger of glass breakage). Power cable To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set. ● The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements. ● The cable has to be HAR-certified or V
Summary of the content on the page No. 13
FCC Class B Compliance Statement The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products will appear in the accompanying documentation. NOTE: This equipment has been tested and found to comply with the limits for a "Class B" digital device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian Interference- Causing Equipment Standard ICES-003 for digital apparatus. These limits ar
Summary of the content on the page No. 14
Disposal and recycling This device has been manufactured to the highest possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The device may be taken back after use to be recycled, provided that it is returned in a condition that is the result of normal use. Any components not reclaimed will be disposed of in an environmentally acceptable manner. If you have any questions on disposal, please contact your local office, our he
Summary of the content on the page No. 15
Installing an ergonomic video workstation Before you set up your equipment, you should select a suitable position for working at the monitor. Please observe the following advice when installing a video workstation. 2 1 1 Avoid glare from electric 1 = Windows 1 = approx. 90° and more lighting. 2 = approx. 90° Avoid direct and reflected glare. Remember to maintain correct posture. 1 0° 65° 30° 60° 30° 65° 2 2 Example layout of monitor, 1 = Bearing surface for palms
Summary of the content on the page No. 16
Mounting and removing the monitor base Mounting monitor base On delivery the monitor base is removed. 8 A26361-K1063-Z121-1-7619, edition 1
Summary of the content on the page No. 17
Removing monitor base Before you can use a swivel arm or a wall bracket, you must remove the entire monitor base: ► Switch off the monitor and pull the power plug out of the power socket. The display surface is susceptible to scratching! ! ► Lay the monitor on its face on a soft surface. ► Remove all cables. ► Unscrew the screws (1, 2) and remove the cover. ► Unscrew the screws (1, 2) and remove the monitor base. You can now mount a swivel arm or a wall bracket as per
Summary of the content on the page No. 18
Connecting the monitor Observe the "Safety notes" in the "Important notes" chapter in this operating manual. ! CE conformance and optimum picture quality are guaranteed only if you use the data cable supplied. Do not cover the ventilation openings of the monitor. The computer power plug must be pulled out! ► Be sure that the monitor and the computer are switched off. Connecting cables to the monitor 1 = Security slot for "Kensington Lock" 2 = Power connector 3 = DVI-D conne
Summary of the content on the page No. 19
► Insert one plug of the audio line in the AUDIO IN (5) socket on the monitor and make sure it is properly engaged. ► Plug the power cable supplied into the power connector (1) of the monitor. ► Mount the cover over the connections. A lock (Kensington Lock) can be mounted in the security slot (1) to protect the monitor from theft. A Kensington Lock is not included in the consignment of the monitor. i Connecting cables to the computer Information on the computer connections and inter
Summary of the content on the page No. 20
Operation of the monitor The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respective situation. Adjusting rake The rake of the monitor can be adjusted by -5° (forward) and +20° (back) from its vertical position. ► Grasp the monitor with both hands on the right and left edge of the casing and adjust it to the desired rake. Switching the monitor on/off 1 = Buttons for the OSD menu (On-Screen-display) 2 = ON/OFF sw
