Summary of the content on the page No. 1
Elo Entuitive Touchmonitor
User Guide
15" LCD Rear Mount Touchmonitor
ET1546L-XXWA-X Series
Revision B
P/N 008593
Elo TouchSystems, Inc.
1-800-ELOTOUCH
www.elotouch.com
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Copyright © 2005 Elo TouchSystems Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems makes no
Summary of the content on the page No. 4
iv
Summary of the content on the page No. 5
Table of Contents Chapter 1 Appendix C Precautions . . . . . . . . . . . . . . . . . . . . 1 Compatibility Modes . . . . . . . . . . . . . . 33 About the Product . . . . . . . . . . . . . . . . . 1 Touchmonitor Specifications ET1546L . . . . . 34 15" LCD Touchmonitor Dimensions. . . . . . . 36 Chapter 2 ET1546L . . . . . . . . . . . . . . . . . . . 36 Unpacking Your Touchmonitor. . . . . . . . . . . 3 Cut
Summary of the content on the page No. 6
C HAPTER C HAPT E R 1INTRODUCTION Congratulations on your purchase of an Elo TouchSystems Entuitive LCD touchmonitor. Your new high-resolution touchmonitor combines the reliable performance of Elo’s touch technology with the latest advances in LCD display design. This combination of features creates a natural flow of information between a user and your touchmonitor. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your
Summary of the content on the page No. 7
Auto adjustment capability High quality full screen re-scaling Multilingual OSD menus: English, French, Dutch, Italian, Spanish, German, Swedish, Finnish, Danish and Portuguese VESA flat panel monitor physical mounting interface (75mm) For full Product Specifications refer to Appendix C. 1-2 Elo Entuitive Touchmonitor User Guide
Summary of the content on the page No. 8
C HAPTER C HAPT E R 2INSTALLATION AND SETUP Unpacking Your Touchmonitor Check that the following 9 items are present and in good condition: OSD remote Video cable OR USB touchscreen Serial touchscreen cable cable European monitor power cable Monitor power cable (US/Canada) CD and Quick Install Guide Mounting L brackets (2) 2-3
Summary of the content on the page No. 9
Product Overview Main Unit LCD Display Detachable mounting L-brackets Rear View 75.0 [2.95] 75.0 [2.95] 2-4 Elo Entuitive Touchmonitor User Guide
Summary of the content on the page No. 10
Bottom View/Side View Remote OSD connector Power switch Power Connector Touch interface connector (serial or USB) Video Cable (analog) connector 2-5
Summary of the content on the page No. 11
Attaching the L-Brackets Depending on your mounting scheme, use the L-brackets or the VESA 75mm standard holes located on the back of the kiosk monitor. See page 15 for VESA mounting information. NOTE: You will need a screwdriver to attach the L-brackets. Your kiosk touchmonitor comes with a mounting bracket (C-bracket) attached at the back. Included are two L-brackets (and four screws) that attach to both ends of the C-bracket for additional mounting options. To attach the L-brackets: 1 Lay
Summary of the content on the page No. 12
Touch Interface Connection NOTE: Your interface cables may have been pre-connected to your monitor at the factory. Your touchmonitor comes with one of the following touchscreen connector cables: Serial (RS-232) cable or USB cable (For Windows 98 or Windows 2000 computers only.) To setup this display, please refer to the following figures and procedures: Serial Connection The following illustrations guide you step by step in connecting your touchmonitor using a serial cable connection. Before
Summary of the content on the page No. 13
Connecting the Video Cable Connections on underside Female 15-pin video connector Video Video cable port Connect the 15-pin video cable to the video port on your PC. Connect the other end of the video cable to the video connector on your touchmonitor. Secure the cable to your touchmonitor and PC by turning the screws on the connector clockwise. 2-8 Elo Entuitive Touchmonitor User Guide
Summary of the content on the page No. 14
Connecting the Serial Touchscreen Cable Connections on underside Serial touchscreen cable Serial touchscreen cable Connect the female end of the serial (RS-232) cable to the serial port on the back of your PC. Connect the male end of the cable to the serial touchscreen connector on your touchmonitor. Secure the cable to your touchmonitor and PC by turning the screws on the connector. 2-9
Summary of the content on the page No. 15
Connect the Remote OSD Cable Connections on underside remote OSD port Video Video cable port Ferrite bead Connect the 6 pin DIN cable to the OSD Remote port on your touchmonitor. 2-10 Elo Entuitive Touchmonitor User Guide
Summary of the content on the page No. 16
Connecting the Power Cable Connections on underside Power Cable Power cable Depending on where you live, you will use either the European or US/Canadian power cable. Connect the female end of the power cable into the power port on the touchmonitor. NOTE: To protect your equipment against risk of damage from electrical surges in the power line, plug the touchmonitor’s power cord into a surge protector, and then connect the surge protector to a grounded (three-pronged) AC electrical out
Summary of the content on the page No. 17
USB Connection NOTE: A USB connection can only be used if your PC is running Windows 98 or Windows 2000. The following illustrations guide you step by step in connecting your touchmonitor using a USB cable connection. Before connecting the cables to your touchmonitor and PC, be sure that the computer and the touchmonitor are turned off. USB touchscreen cable Video cable Monitor power cable (US/Canada) Remote OSD Power connector European monitor power cable Power Female USB Switch touchscreen
Summary of the content on the page No. 18
Connecting the Video Cable Connections on underside Female 15-pin video connector Video Video cable port Connect the 15-pin video cable to the video port on your PC. Connect the other end of the video cable to the video connector on your touchmonitor. Secure the cable to your touchmonitor and PC by turning the screws on the connector clockwise. 2-13
Summary of the content on the page No. 19
Connecting the USB Touchscreen Cable Connections on underside USB touchscreen cable USB touchscreen cable Connect the USB touchscreen cable to the USB touchscreen connector on the touchmonitor. Connect the other end of the USB cable to your PC. The touchscreen cable connectors should fit snugly into the connectors on your touchmonitor and PC. 2-14 Elo Entuitive Touchmonitor User Guide
Summary of the content on the page No. 20
Connecting the Remote OSD Cable Connections on underside remote OSD port Connect the 6 pin DIN cable to the OSD Remote port on your touchmonitor. 2-15
