Summary of the content on the page No. 1
PRECAUTIONS
Chapter 1 Features and Overview
1-1 Features
1-2 Switches and Indicators
1-3 Functions and Basic Operation
Chapter 2 Settings and Adjustments
2-1 Utility Disk
2-2 Screen Adjustment
2-3 Color Adjustment
2-4 Off Timer/Power Saving Settings
2-5 Screen Size Selection
2-6 Power Indicator/EIZO Logo Display Setting
2-7 Beeper Settings
Important
2-8 Locking Switches
2-9 Setting Adjustment Menu Display
Please read this User’s Manual and Setup
2-10 Viewing Information/Setting Language
Manual
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Summary of the content on the page No. 4
Summary of the content on the page No. 5
WARNING Handle the power cord with care. • Do not place the cord underneath the unit or other heavy objects. • Do not pull on or tie the cord. If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fi re or electric shock. Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock. When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely. Not doing so may cause the
Summary of the content on the page No. 6
CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit fi rmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. • Do not place any objects on the ventilation slots. • Do not install the
Summary of the content on the page No. 7
LCD Panel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing pixels or lit pixels does not indicate damage to the LCD monitor. Percentage of effective pixels: 99.9994% or higher. The backlight of the LCD panel has a fi xed life span. When the screen becomes dark or begins to fl icker, p
Summary of the content on the page No. 8
CONTENTS 2-7 Beeper Settings .............................................20 PRECAUTIONS ...................................................... 1 ● To set the beeper [Beep] .................................. 20 LCD Panel ................................................................... 5 2-8 Locking Switches ..........................................21 To use the monitor comfortably ............................... 5 ● To lock operation [Adjustment Lock] ................. 21 2-9 Setting Adjust
Summary of the content on the page No. 9
Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor. 1-1 Features • 21"(S2111W)/24"(S2411W) wide format LCD • Applicable to HDCP • Equipped with the ContrastEnhancer and OutlineEnhancer functions • Dual-input compliant (DVI-I x 2 connectors) • DVI digital input (TMDS) compliant • Horizontal scan frequency, Vertical scan frequency and Resolution are as follows; Horizontal scan Analog S2111W 24 - 82 kHz frequency S2411W 24 - 94 kHz Digital S2111W 31 - 65 kHz
Summary of the content on the page No. 10
Summary of the content on the page No. 11
To make useful settings/adjustments Adjustment menu (Refer to below for operation) Power-save Settings Page 18 ● [VESA DPMS/DVI DMPM] to set power-saving of the monitor Information Page 22 Set the off timer ● [Information] to check settings, usage time, etc. ● [Off Timer] to set the monitor power off time ……………………………………… see page 17 Language Change the screen size ● [Screen Size] to change screen size ……………………………………… see page 19 ● [Border Intensity] to change the brightness of non- displ
Summary of the content on the page No. 12
Chapter 2 Settings and Adjustments 2-1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. ● Disk Contents • Disk contents and software overview The disk includes a monitor information file, application software programs for adjustment, and User’s Manual. Refer to “readme.txt” or the “Readme” file on the disk for software startup procedures or file access procedures.
Summary of the content on the page No. 13
2-2 Screen Adjustment Digital Input Attention • Wait 30 minutes or more from When digital signals are input, images are displayed correctly based on the monitor power on before starting preset data of the monitor. adjustments. Analog Input NOTE • Auto adjustment is available using The monitor screen adjustment is used to suppress fl ickering of the screen or the . If satisfactory adjustment adjust screen position and screen size correctly according to the PC to be used. cannot be obtained w
Summary of the content on the page No. 14
NOTE Perform advanced adjustments for the following using the • Touch the control button slowly so as 4 not to miss the adjustment point. menu of the Adjustment menu. • When blurring, fl ickering or bars ● To eliminate vertical bars [Clock] appear on the screen after adjustment, proceed to [Phase] to remove (1) Choose from the menu, and touch . fl ickering or blurring. The menu appears. (2) Adjust the clock with or , and touch . The adjustment is completed.
Summary of the content on the page No. 15
● To adjust extra or cut image [Resolution] This adjustment is available to equalize the resolution shown on the Setting menu and the resolution of input signal. (1) Choose from the menu, and touch . The menu appears. (2) Adjust the vertical resolution with or , and then horizontal resolution with or , and touch . The adjustment is completed. Extra image is displayed due to excessive dots. A part of image is cut due to short dots. Adjust the signal output
Summary of the content on the page No. 16
Summary of the content on the page No. 17
Attention Advanced Adjustments [Adjustment menu] • Perform [Range Adjustment] before Independent setting and saving of color adjustment are available for each starting color adjustment for analog input signals. FineContrast mode. Refer to “To adjust color gradation automatically” on page 13. ● To select an appropriate mode for images • The FineContrast mode cannot be changed during color adjustment. Set ✓: Adjustment available −: Invalid for adjustment the FineContrast mode in advance
Summary of the content on the page No. 18
Menu Description Adjustment range Gain To adjust red, green, and 0 to 100% blue to a desired color tone Adjust the respective brightness of respectively red/green/blue to make a desired color tone. Display an image with white or gray background for adjustment. NOTE • Values shown in percentage are available only as reference. 6 Colors To adjust and Hue: –100 to 100 in Red, Saturation: –100 to 100 Yellow, Green, Cyan, Blue, and Magenta respectively Enhancer ContrastEnhanc
Summary of the content on the page No. 19
2-4 Off Timer/Power Saving Settings ● To set monitor power-off time [Off Timer] Attention This function allows the monitor to automatically turn off after a specifi ed time • The Off Timer functions even in the has passed. This function serves to reduce afterimages caused when the monitor power saving mode, but the advance screen is left on for a long time period without use. Use this function when an notice is disabled. The monitor power image is displayed throughout the day. is turned off
Summary of the content on the page No. 20
● To set monitor power-saving [VESA DPMS/DVI DMPM] ■ Analog input This monitor complies with the VESA DPMS standard. Attention [Power Saving System] • Unplugging the power cord Power PC Monitor completely shuts off power supply to Indicator the monitor. Operating Operating Blue • USB compliant devices connected Power STAND-BY Power saving Orange to the monitor work even if the saving SUSPENDED OFF monitor is in the power saving mode. Therefore, power consumption of the monitor varies wit
