Summary of the content on the page No. 1
Summary of the content on the page No. 2
User Guide 15" LCD Desktop Touchmonitor 1524L Series Revision A P/N 008549
Summary of the content on the page No. 3
Summary of the content on the page No. 4
Copyright © 2002 Elo TouchSystems Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems makes no
Summary of the content on the page No. 5
iv
Summary of the content on the page No. 6
Table of Contents Chapter 1 Regulatory Information 31 Introduction 7 Warranty 35 Product Description . . . . . . . . . . . . . . . . 7 Precautions . . . . . . . . . . . . . . . . . . . . 7 Index 37 About the Product . . . . . . . . . . . . . . . . . 8 Chapter 2 Installation and Setup 9 Unpacking Your Touchmonitor. . . . . . . . . . . 9 Product Overview . . . . . . . . . . . . . . . . 10 Main Unit . . . . . . . . .
Summary of the content on the page No. 7
Copyright © 1996, Borland International. All rights reserved. BORLAND CONFIDENTIAL January 9, 2002 9:17 am (D:\Vera new\8549 15 in Econ AT User Guide\15 in Economy AT\15 in Econ ATTOC.fm) vi
Summary of the content on the page No. 8
C H A P TER 1 C HAPT ER 1INTRODUCTION Product Description Your new touchmonitor combines the reliable performance of touch technology with the latest advances in LCD display design. This combination of features creates a natural flow of information between a user and your touchmonitor. This LCD monitor incorporates 15” color active matrix thin-film-transistor (TFT) liquid crystal display to provide superior display performance. A maximum resolution of XGA 1024x768 is ideal for displaying gra
Summary of the content on the page No. 9
About the Product Your LCD Desktop Touchmonitor is a 15” XGA TFT color display with the following features: The internal microprocessor digitally controls auto-scanning. For horizontal scan frequencies between 31.5 KHz and 60.2 KHz, and vertical scan frequencies between 56.3 Hz and 75.0 Hz. In each frequency mode, the microprocessor-based circuitry allows the monitor to function at the precision-of a fixed frequency. High contrast color TFT LCD display support resolution up to XGA 102
Summary of the content on the page No. 10
C H A P TER 2 C HAP TER 2INSTALLATION AND SETUP This chapter discusses how to install your LCD touchmonitor and how to install the driver software. Unpacking Your Touchmonitor Check that the following 7 items are present and in good condition: Serial cable VGA cable LCD monitor European power cable Power cable US/Canada CD and Quick Install Guide 2-9
Summary of the content on the page No. 11
Product Overview Main Unit Rear View 2-10 User Gu ide
Summary of the content on the page No. 12
Touch Interface Connection NOTE: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off. 1 Connect one end of the power cord to the monitor and the other end to the outlet. 2 Connect one end of the video cable to the rear side of computer and the other to the LCD monitor. Tighten by turning the two thumb screws clockwise to ensure proper grounding. 3 Connect one end of the touchscreen (RS232) cable to the rear side of computer a
Summary of the content on the page No. 13
Installing the Driver Software The driver software allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: Windows XP Windows 2000 Windows Me Windows 98 Windows 95 Windows NT 4.0 Your touchmonitor is plug-and-play compliant. Information on the video capabilities of your touchmonitor is sent to your video display adapter when Windows starts. If Windows detects your touchmonitor, follow the instructions o
Summary of the content on the page No. 14
Installing the Serial Touch Driver Installing the Serial Touch Driver for Windows XP, Windows 1 2000 , Me, 95/98 and NT 4.0 NOTE: For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver. 1 Insert the CD-ROM in your computer’s CD-ROM drive. 2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program. 3 Follow the directions on the screen to complete the driver setup for your version of Wi
Summary of the content on the page No. 15
Installing the Serial Touch Driver for MS-DOS and Windows 3.1 You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS. To install Windows 3.x and MS-DOS from Windows 95/98, follow the directions below: 1 Insert the CD-ROM in your computer’s CD-ROM drive. 2 From DOS, type d:\EloDos_W31 to change to the correct directory on the CD-ROM (your CD-ROM drive may be mapped to a different drive letter). 3 Ty
Summary of the content on the page No. 16
C H A P TER 3 C HAP TER 3OPERATION About Touchmonitor Adjustments Your touchmonitor will unlikely require adjustment. Variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should be operating in native resolution, that is 1024x768 at 60k-75 Hz. Use the Display control panel in Windows to choose 1024x768 resolution. Operating in other resolutions will degrade video performance. Fo
Summary of the content on the page No. 17
Front Panel Controls Enter Auto Menu/Exit + - 7 6 5 4 3 2 1 Control Function Turns the display system power on or off. Power Switch 1 Lights up to indicate the power is turned ON. Power LED 2 To enter or exit OSD manual. Menu/Exit 3 To select the function item clockwise. To increase the value 4 + of the parameter in the OSD you have selected for adjustment. To select the function item counter clockwise.To decrease − 5 the value of the parameter in the OSD you have selected for adjustment.
Summary of the content on the page No. 18
Controls and Adjustment OSD Menu Functions To Display and Select the OSD Functions: 1 Press Menu/Exit key to activate the OSD menu. 2 Use + or - to move clockwise or counterclockwise through the menu. Then press the Enter key, the parameter will be highlighted when selected. 3 Then use + or - to increase or decrease the value of the parameter, or make selection between different options. 4 To quit the OSD screen at any time during the operation, press Menu/Exit key. If no keys are pressed for
Summary of the content on the page No. 19
OSD Control Options Control Description Increases or decreases brightness Brightness Contrast Increases or decreases contrast H-Position Moves the screen left or right V-Position Moves the screen up or down Phase Increases or decreases the snow noise of the image after auto adjustment is made. Clock The dot clock is fine-adjusted after auto adjust. Moves the OSD position horizontally on the screen. When the + OSD H-Position button is pressed, the OSD control menu will move to the right side o
Summary of the content on the page No. 20
Preset Modes To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. If any of these display modes are detected, the monitor automatically adjusts the picture size and centering. When none of the mode is matched, the user can store their preferred modes in the user modes. The monitor is capable of storing up to 7 user modes. The only condition to store as a user mode is the new display information
