Summary of the content on the page No. 1
Important
Please read PRECAUTIONS and this User’s Manual carefully to
familiarize yourself with safe and effective usage procedures. Please
retain this manual for future reference.
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Copyright© 2007 Tech Source, Inc. Copyright© 2007 EIZO NANAO CORPORATION No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of Tech Source, Inc. and EIZO NANAO CORPORATION. Tech Source, Inc. and EIZO NANAO CORPORATION are under no obligation to hold any submitted material or information confidential unl
Summary of the content on the page No. 4
Contents 1 Overview...............................................................................................................................6 1.1 Layout of this Manual.............................................................................................................7 1.2 Warnings and Safety Notes...................................................................................................8 1.3 Packaging...................................................................
Summary of the content on the page No. 5
5 Technical Data ...................................................................................................................54 5.1 Display Module ....................................................................................................................54 5.2 Power Supply.......................................................................................................................54 5.3 Operating Conditions............................................................
Summary of the content on the page No. 6
1 Overview The TFT Monitor Raptor SQ2801 was developed to meet the very demanding requirements in the Air Traffic Management where system availability and reliability is crucial. Ergonomic criteria have been addressed to ensure high acceptance from the operators. Reduced depth and lower weight compared to CRT monitors allow easy installation into workstation consoles of air traffic control rooms. Considerably lower power consumption and heat emissions are some of the other advantages ove
Summary of the content on the page No. 7
1.1 Layout of this Manual This manual was created to assist system integrators and operators during installation and operation of the LCD TFT Monitor Raptor SQ2801. The layout is intended to allow even inexperienced users to install and set-up the monitor. The manual is divided into following chapters: Chapter 1 Introduction Brief description of the Raptor SQ2801 Chapter 2 Installation The chapter discusses the installation and the various interfaces available to the monitor Chap
Summary of the content on the page No. 8
1.2 Warnings and Safety Notes For information about warnings and safety notes, refer to PRECATUIONS supplied with this manual. 8 1 Overview
Summary of the content on the page No. 9
1.3 Packaging NOTE To avoid permanent damage, great care should be taken to ensure that the monitor is adequately packed and transported in the correct manner. The original packaging should be retained and re-used for future transportation purposes. The original packaging has a red label with two arrows and text “hier oben” (see Fig. 1 and Fig. 2), which indicates the correct orientation of the package (i.e. when correctly packed this label should be aligned with the top edge and front
Summary of the content on the page No. 10
1.4 Instructions for Handling Components Susceptible to Electrostatic Shocks Most of the assemblies within the LCD monitor Raptor SQ2801 contain components which can be permanently damaged or destroyed by electrostatic discharge. Such resulting damage may or may not result in total failure of the components or modules affected. The following precautions must be strictly observed when handling such assemblies (this work should only be carried out by qualified service technicians): • When
Summary of the content on the page No. 11
2 General Installation Preparation for installing the LCD monitor includes following steps: • Removal of all packaging materials • Checking of components for damage • Comparison of components received with those listed on the delivery note • Connection to the computer system and power supply • System integration under consideration of technical and ergonomic aspects 2.1 Removal of Packaging and Checking of Component Parts After unpacking all delivered components, they should be c
Summary of the content on the page No. 12
2.2 Installing the Monitor The Raptor SQ2801 is currently offered in two versions - desktop version and chassis version. Both these version are discussed in this section. The desktop version is a “standalone” unit that can be placed on top of a desktop console. As for the chassis version, it is easy to integrate it onto the rear of control panel or a console by using two mounting brackets. Please note the following for safe and proper operation: Ambient Temperature In order for
Summary of the content on the page No. 13
2.2.1 Raptor SQ2801 Dimensions (Chassis version) Fig. 3: Raptor SQ2801 Dimensions (Chassis version); Front View 2 General Installation 13
Summary of the content on the page No. 14
Fig. 4: Raptor SQ2801 Dimensions (Chassis version); Rear View 14 2 General Installation
Summary of the content on the page No. 15
Fig. 5: Raptor SQ2801 Dimensions (Chassis version); Side View 2 General Installation 15
Summary of the content on the page No. 16
2.2.2 Raptor SQ2801 Dimensions (Desktop version) Fig. 6: Raptor SQ2801 (Desktop Version); Front View 16 2 General Installation
Summary of the content on the page No. 17
Fig. 7: Raptor SQ2801 Dimensions (Desktop version); Rear View 2 General Installation 17
Summary of the content on the page No. 18
Fig. 8: Raptor SQ2801 Dimensions (Desktop); Side View 18 2 General Installation
Summary of the content on the page No. 19
2.2.3 Raptor SQ2801 Dimensions (Panel mount version) Fig. 9: Raptor SQ2801 Dimensions (Panel mount); Front View 2 General Installation 19
Summary of the content on the page No. 20
Fig. 10: Raptor SQ2801 Dimensions (Panel mount); Side View 20 2 General Installation
