Summary of the content on the page No. 1
®
Summary of the content on the page No. 2
’ For U.S.A, Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: FlexScan L797-U is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, in
Summary of the content on the page No. 3
User’s Manual Color LCD Monitor
Summary of the content on the page No. 4
English SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2006 EIZO NANAO CORPORATION All rights reserved. No par
Summary of the content on the page No. 5
English TABLE OF CONTENTS PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1-1. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1-2. Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1-3. Controls & Conn
Summary of the content on the page No. 6
English PRECAUTIONS IMPORTANT! This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] WARNING If the unit begins to emit smoke, smells like
Summary of the content on the page No. 7
English WARNING Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit checked by a qualified service engineer before using it again. Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and res
Summary of the content on the page No. 8
English WARNING The equipment must be connected to a grounded main outlet. Not doing so may cause in fire or electric shock. Use the correct voltage. The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or equipment damage. Do not overload your power circuit, as this may result in fire or electric shock. Handle the power cord with care. Do not place the cord underneath the unit or othe
Summary of the content on the page No. 9
English CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. OK Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. Do not place any objects on the ventilation slots. Do not in
Summary of the content on the page No. 10
English LCD Panel When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation disappears, otherwise it may cause some damages to it. In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precis
Summary of the content on the page No. 11
English 1. INTRODUCTION Thank you very much for choosing an EIZO Color Monitor. 1-1. Features Dual inputs compliant (DVI-I x 2 connecters) DVI (p. 49) Digital input (TMDS (p. 50)) compliant ADC (Apple Display Connector) inputs compliant [Horizontal scanning frequency] Analog: 30 - 82 kHz Digital: 30 - 65 kHz [Vertical scanning frequency] Analog: 49 - 86 Hz (1280 x 1024: 49 - 76 Hz) Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz) [Resolution] 1280 dots x 1024 lines Supports to sRGB standard (p.
Summary of the content on the page No. 12
English 1-3. Controls & Connectors Front (2) (1) FineContrast Menu Control Panel SIGNAL MODE AUTO ENTER 1 - 2 (4) (3) (5) (6) (7) (8) (9) ® (1) ScreenManager (2) Main Power Switch (3) Input Signal Selection Button 1 (4) Mode Button* (5) Auto Adjustment Button (6) Enter Button 2 (7) Control Buttons (Left, Down, Up, Right)* (8) Power Button 3 (9) Power Indicator* Blue Operation Yellow Power saving Flashing yellow (2 times for each) Power save mode Digital only Flashing yellow slowly Power is of
Summary of the content on the page No. 13
English Rear (10) (11) Bottom (12)(13)(14) (15) 4 (10) Height Adjustable Stand (Detachable)* 5 (11) Security Lock Slot* (12) DVI-I Input Connector (SIGNAL 1, SIGNAL 2) (13) USB Port (1 Upstream) (14) USB Port (2 Downstream) (15) Power Connector *4 The LCD monitor has the capability of the Portrait/Landscape display (The panel pivots in the clockwise direction 90°.). For the Portrait display, use the software for the portrait. The LCD monitor can be used with an optional arm stand by removing
Summary of the content on the page No. 14
English 2. CABLE CONNECTION 2-1. Before Connecting Before connecting your monitor to the PC, change the display screen settings (resolution (p. 50) and frequency) in accordance with the charts below. NOTE When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings. Analog Input Resolution Frequency Dot Clock Remarks 640 × 480 67 Hz Apple Macintosh 640 × 480 ~ 85 Hz VGA, VESA
Summary of the content on the page No. 15
English 2-2. Connecting the Signal Cable (For the computer employing D-Sub or DVI connector) NOTE Be sure that the power switches of both the PC and the monitor are OFF. 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. Power Cord Analog Input Signal Cable Connector of the PC PC Signal Cable Video Output Connector / Standard graphics car
Summary of the content on the page No. 16
English 2. Plug the power cord into the power connector on the rear of the monitor. 3. Lead the power cord and signal cable into the cable holder at rear of the monitor. NOTE The cables are recommended to lead with slight sag for the smooth motion of the stand and the Portrait/Landscape display. Cable Holder 4. Plug the other end of the cord into a power outlet. The monitor’s power indicator will flash yellow slowly. WARNING Use the enclosed power cord and connect to the standard power outl
Summary of the content on the page No. 17
English 5. Switch on the PC’s power. The monitor’s power indicator will light up (blue). If an image does not appear, refer to the “7. TROUBLESHOOTING” (p. 41) for additional advice. Whenever finishing your operation, turn off the PC and the monitor. NOTE When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen. Adjust brightness of the screen depending on the brightness of your environmen
Summary of the content on the page No. 18
English 2-3. Connecting the Signal Cable (For the computer employing ADC) NOTE Be sure that the power switches of both the PC and the monitor are OFF. 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. Power Cord To Input the Signal Through ADC Signal Cable Connector of the PC PC Signal Cable (FD-C39 enclosed) Video Output Connector ADC
Summary of the content on the page No. 19
English 3. Lead the power cord and signal cable into the cable holder at rear of the monitor. NOTE The cables are recommended to lead with slight sag for the smooth motion of the stand and the Portrait/Landscape display. Cable Holder 4. Plug the other end of the cord into a power outlet. The monitor’s power indicator will flash yellow slowly. WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power
Summary of the content on the page No. 20
English 5. Press the power button while pressing the Input Signal Selection button. The Input Selection menu is appeared on the screen. SIGNAL MODE AUTO ENTER 1 - 2 Enter Button Mode Button Power Button Power Indicator Control Buttons Input Signal (Left, Bottom, Up, Right) Selection Button 6. Change the input selection setting of the connector in the Input Selection menu to “ADC”. Press Enter button to complete the setting and the menu closes. 7. Switch on the PC’s power. The monitor’s pow
