Summary of the content on the page No. 1
User’s Manual
Monochrome LCD Monitor
It shall be assured that the final system is in compliance
to IEC60601-1-1 requirements.
Summary of the content on the page No. 2
English SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. • Power supplied equipment can emit electromagnetic waves, that coul
Summary of the content on the page No. 3
English TABLE OF CONTENTS PRECAUTIONS ...................................................................................4 1. INTRODUCTION .....................................................................................9 1-1. Features ........................................................................................................9 1-2. Package Contents..........................................................................................9 1-3. Controls & Connectors .............
Summary of the content on the page No. 4
English PRECAUTIONS IMPORTANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. • To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] [Symbols on the unit] Symbol Location This sym
Summary of the content on the page No. 5
English WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage. Do not open the cabinet or modify the unit. Opening the cabinet or modifying the unit may result in fire, electric shock, or burn. Refer all servicing to qualified service personnel. Do not attempt to service
Summary of the content on the page No. 6
English WARNING To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. To disconnect the power cord, grasp the plug firmly and pull. OK Tugging on the cord may damage and result in fire or electric shock. The equipment must be connected to a grounded
Summary of the content on the page No. 7
English WARNING When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely with the enclosed screws. Not doing so may cause the unit to become unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten them secure
Summary of the content on the page No. 8
English CAUTION Do not touch the plug with wet hands. Doing so may result in electric shock. Use an easily accessible power outlet. This will ensure that you can disconnect the power quickly in case of a problem. Periodically clean the area around the plug. Dust, water, or oil on the plug may result in fire. Unplug the unit before cleaning it. Cleaning the unit while it is plugged into a power outlet may result in electric shock. If you plan to leave the unit unused for an extended period
Summary of the content on the page No. 9
English 1. INTRODUCTION Thank you very much for choosing an EIZO Monochrome Monitor. 1-1. Features • DVI (p.31) Digital input (TMDS (p.31)) compliant • [Resolution] 2M pixels (1600 dots × 1200 lines) [Horizontal scanning frequency] 75 kHz [Vertical scanning frequency] 60 Hz • USB (Universal Serial Bus) hub supported (p.20) • The height adjustable stand incorporated • Ultra slim bezel incorporated • Power saving function (p.18) (DVI-DMPM(p.31)) NOTE • Regarding the scanning resolut
Summary of the content on the page No. 10
English 1-3. Controls & Connectors Front (1) (2) Control Panel (3) (4) (5) (6) ® (1) ScreenManager (2) Main Power Switch (3) ENTER Enter Button *1 (4) Control Buttons (Left, Down, Up, Right) (5) Power Button *2 (6) Power Indicator Green Operation Orange Power saving Flashing orange (2 times for each) Power save mode Flashing orange slowly Power is off (Main power is on) Off Power off *1 These buttons are changed to Up, Left, Right, Down in case of selecting “Landscape” fo
Summary of the content on the page No. 11
English Rear (9) (10) (11) (7) (8) (12) Side * 3 (7) Height Adjustable Stand (Detachable) *4 (8) Security Lock Slot (9) USB Port (1 Upstream) (10) USB Port (2 Downstream) (11) DVI-D Input Connector (12) Power Connector *3 The LCD monitor has the capability of the Portrait/Landscape display. (The panel pivots in the clockwise direction 90°.) The LCD monitor can be used with an optional arm stand by removing the stand (p.22). *4 Allows for connection of a security cable. T
Summary of the content on the page No. 12
English 2. CABLE CONNECTION NOTE • Be sure that the power switches of both the PC and the monitor are OFF. • Please refer to the manual of the PC also to connect the monitor. 1. Pivot the panel in the counter-clockwise to fix in portrait position. 2. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. 90° Signal Cable FD-C39 Power Cord
Summary of the content on the page No. 13
English 4. Lead the power cord and signal cable into the cable holder at rear of the monitor. NOTE • When housing the cables into the cable holder, lead them to the cable entrance side and pinch the projection to open the cable entrance. • The cables are recommended to lead with slight sag for the smooth motion of the stand. Projection Cable Entrance Cable Holder 5. Plug the other end of the power cord into a power outlet. WARNING Use the enclosed power cord and connect to the standa
Summary of the content on the page No. 14
English 6. Turn on the monitor’s Power Button and then switch on the PC’s power. The monitor’s power indicator will light up (green). If an image does not appear, refer to the “6. TROUBLESHOOTING” (p.24) for advice. Whenever finished, turn off the PC and the monitor. 7. Set the kind of graphics card. “8bit” of “Monochrome” (the 8bit monochrome graphics card) is set as default. If your computer is equipped with the 10bit monochrome graphics card or the 8bit color graphics card, follow th
Summary of the content on the page No. 15
English 3. ScreenManager 3-1. How to use the ScreenManager ScreenManager Main Menu Control Buttons Enter Button Left, Down, Up, Right 1. Entering the ScreenManager Press the Enter Button once to display the main menu of the ScreenManager. 2. Making Adjustments and Settings (1) Select the desired sub menu icon using the Control Buttons and press the Enter Button. The sub menu appears. (2) Use the Control Buttons to select the desired setting icon and press the Enter Button. The se
Summary of the content on the page No. 16
English 3-2. ScreenManager Adjustments and Settings The following table shows all the ScreenManager’s adjustment and setting menus. Main menu Sub menu Reference *1 Screen Brightness Control the brightness for the entire screen. Unlock Unlock the lock. (p.18) *2 *3 LUT Setting Default / Normal / Custom Set the LUT (Look-up table) (p.31) setting. PowerManager DVI DMPM 3-4. Power-save Setup. (p.19) Others Off Timer Set the monitor’s off timer to on or off. (p.17) Menu Position Menu A
Summary of the content on the page No. 17
English 3-3. Useful Functions Adjustment Lock Use the “Adjustment Lock” function to prevent any accidental changes. Locked function • Settings in the ScreenManager. • Adjustment of brightness by the Control Buttons. [How to lock] (1) Switch off the monitor’s power by the power button on the control panel. (2) Press on the Enter button while switching on the monitor’s power. [How to unlock] (1) Switch off the monitor’s power by the power button on the control panel. (2) Hold down the
Summary of the content on the page No. 18
English Unlock Function after Calibration The calibration is available when using the specified optional calibration kit (p.29). After the calibration, the functions below are automatically locked. Locked function • Brightness adjustment (including the adjustment by Left and Right Buttons on the control panel) • LUT Setting Unlock function is available by using ScreenManager. [How to unlock] (1) Select the of menu. (2) Select “Unlock”. NOTE • Performing the o
Summary of the content on the page No. 19
English 3-4. Power-save Setup The menu in the ScreenManager enables to set the power-save setup. NOTE • Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. • Even if the monitor is in a power saving mode, USB compliant devices function when they are connected to the monitor’s USB (both the upstream and the downstream ports). Therefore, power consumpti
Summary of the content on the page No. 20
English 4. MAKING USE OF USB (Universal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected. Required system environment • PC with build-in USB ports or another USB hub connected to the USB compliant PC • EIZO USB Cable (MD-C93) NOTE • The USB hub function may not work properly depending on the PC or peripherals. Pleas
