Summary of the content on the page No. 1
Cover
Important
Please read PRECAUTIONS, this User’s Manual and Setup Guide
(separate volumes) carefully to familiarize yourself with safe and effective
usage.
• Please read to the Setup Guide for basic information ranging from
connection of the monitor to a PC to using the monitor.
• The latest User’s Manual is available for download from our site:
http://www.eizo.com
Summary of the content on the page No. 2
[Location of CautionStatement] Ex. FlexStand ® As an ENERGY STAR Partner, EIZO NANAO CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency. This product has acquired TCO standard that relates to safety, ergonomics, environment and so forth of office equipment. For overview of the TCO, refer to our website. http://www.eizo.com Product specification may vary with sales areas. Confirm the specification in the manual written in language of the region
Summary of the content on the page No. 3
Notice for thismonitor This product is suited to creating documents, viewing multimedia content, and other general purposes. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual. The specifications noted in this manual are only applicable for power cords
Summary of the content on the page No. 4
Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or LCD panel. NOTE • Optional ScreenCleaner is recommended for cleaning the panel surface. [LCD Panel] • Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. • Remove persistent stains gently with a cloth dampened with a little water, and then clean the LCD panel again with a dry cloth for better finishing. [Cabinet]
Summary of the content on the page No. 5
CONTENTS -8 Turningoff the monitor automatically Cover ............................................................. 1 [OffT imer] ...................................................... Noticefor this monitor .............................................. -9 Setting On/Offfor the automatic brightness adjustmentfunction [Auto EcoView] ........... CONTENTS ............................................................. -10 Shifting to the power sa
Summary of the content on the page No. 6
CONTENTS Chapter Troubleshooting ............................... Chapter Reference ......................................... 6 -1 How to Attach the Optional Arm ................... 6 - Attachingthe FlexStand ................................ 8 - Attaching the TriStand .................................. 9 - Foldingthe T riStand ...................................... 0 5-5 Specifications ................................................ -6 Glos
Summary of the content on the page No. 7
Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor. 1-1 Features • 23” wide format LCD • Applicable to the resolution of 1920 × 1080 • Power saving function 1 Suppressing the power consumption* reduces the carbon dioxide emissions. This product is equipped with various power saving functions. – Power Consumption when main power switch is Off: 0W Equipped with main power switch. Turning off the main power switch completely shuts off power supply to th
Summary of the content on the page No. 8
1 * Reference values: – EV2313W Maximum power consumption: 32W (Luminance Max., at default settings) 2 Standard power consumption: 16W (100VAC, Luminance 120cd/m , at default settings) 2 Standard power consumption: 16W (200VAC, Luminance 120cd/m , at default settings) – EV2333W Maximum power consumption: 42W (Luminance Max., at default settings) 2 Standard power consumption: 25W (100VAC, Luminance 120cd/m , at default settings) 2 Standard power consumption: 24W (200VAC, Luminance 120cd/m , a
Summary of the content on the page No. 9
1- Controls and Functions Ex. FlexStand 14 17 16 13 Adjustment menu ® * ( ScreenManager ) 15 1 2 3 4 5 6 7 8 9 10 11 12 1 EcoViewSense sensor Detects the movement of a person in front of the monitor. EcoView Sense function (page 25). Auto EcoViewsensor Detects ambient brightness. Auto EcoView function (page 24). EcoViewbutton Displays the setting menu of the power saving function (Auto EcoView, EcoView Sense and EcoView Index) (page 24, 25, 26). Input Signal Selection button Sw
Summary of the content on the page No. 10
1- Compatible Resolutions/Frequencies The monitor supports the following resolutions. Analog Input (D-Sub) Dot Clock Resolution Frequency 640 × 480 (VGA, VESA) ~75 Hz 720 × 400 (VGA TEXT) 70 Hz 800 × 600 (VESA) ~75 Hz 1024 × 768 (VESA) ~75 Hz 1152 × 864 (VESA) 75 Hz 148.5 MHz (Max.) 1280 × 960 (VESA) 60 Hz 1280 × 1024 (VESA) ~75 Hz 1280 × 720 (CEA-861) 60 Hz 1680 × 1050 (VESA CVT, VESA CVT RB) 60 Hz * 1920 × 1080 (CEA-861) 60 Hz Digital Input (DVI-D) Resolution Frequency DotClock 640 ×
Summary of the content on the page No. 11
1- Functions and BasicOperation Toadjust the screen and color Mainmenu (Refer to page 1 for operation) Analoginput only [Atanalog signal input] 1 Screen Adjustment Page 1 6 (Automatic Adjustment) ● To adjust flickering and position [Screen] ……………………………… see page 16 [Atdigital signal input] ● To adjust color gradation automatically [Range] ……………………………… see page 18 Screen Adjustment Page1 7 (Advanced Adjustment) [At analog signalinput] [At digita
Summary of the content on the page No. 12
To use themonitor with lowpower consumption Main menu (Referto page 1 for operation) [At analog signal input] Power-saveSettings ● Setting On/Off for Power Saving mode [Power Save] ………………………see page 23 ● Turning off the monitor automatically [Atdigital signal input] [Off Timer] …………………………see page 24 ● Shifting to the power saving mode when a person leaves the monitor [EcoView Sense] ……………………see page 25 • The Adjustment menu and the EcoView menu cannot be display
Summary of the content on the page No. 13
To makeuseful settings/adjustments Adjustmentmenu (Refer to page 1 for operation) [At analog signal input] Other Settings ● To change screen size [Screen Size] ……………………… see page 26 ● To adjust brightness of non-display area [Atdigital signal input] [Border Intensity] …………………… see page 27 ● To set input signal selection [Input Signal] ……………………… see page 32 ● To update menu settings [Menu Size/Menu Position/Menu Off Timer/ Translucent] ………………………… see page 27 ● To se
Summary of the content on the page No. 14
Basic operation of Adjustment menu [Displaying Adjustmentmenu and selecting function] (1) Press . The Main menu appears. (2) Select a function with / / / , and press . The Sub menu appears. (3) Select a function with / / / , and press . The adjustment/setting menu appears. (4) Adjust the selected item with / / / , and press . The setting is saved. [Exiting Adjustmentmenu] (1) Choose from the Sub menu and press . The Main menu appears. (2) Choose from the Ma
Summary of the content on the page No. 15
Chapter Settingsand Adjustments -1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the software programs. ● Disk contentsand software overview The disk includes software programs for adjustment, and User's Manual. Refer to “Readme.txt” file on the disk for software startup procedures or file access procedures. Item Overview Windows Macintosh A “Readme.txt” file √ √ Screen adjustment patt
Summary of the content on the page No. 16
- Screen Adjustment Digital Input When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if characters and/or lines appear blurred, go to step 6 “To modify blurred characters/lines [Smoothing]”. When performing more advanced adjustment, see “2-3 Color Adjustment” (page 19) and subsequent pages. Attention AnalogInput • Wait 30 minutes or more from The monitor screen adjustment is used to suppress flickering of the screen or monitor
Summary of the content on the page No. 17
Performthe auto adjustment again with theanalog screen 3 adjustmentpattern displayed. ● T o adjust flickering, screen position, and screen size automatically [Screen] (1) Display Pattern 1 of the “Screen adjustment pattern files” in full screen on the monitor. (2) Choose from the menu, and press . The menu appears. (3) Choose “Execute” with or , and press . Flickering, screen position, and screen size are corrected by the auto- adjus
Summary of the content on the page No. 18
NOTE NOTE ● To correctscreen position [Position] • • Since the number of pixels and the Since the number of pixels and the (1) Choose from the menu, and press . pixel positions are fixed on the LCD pixel positions are fixed on the LCD The menu appears. m mo oni nit tor or,, o on nl ly y on one e po posi sit ti ion on i is s p pro rovi vide ded d (2) Adjust the position with / / / to display the image to display images correctly to display images cor
Summary of the content on the page No. 19
- Color Adjustment ● To select thedisplay mode (FineContrastmode) FineContrast allows you to select the best display mode easily according to the monitor’s application. FineContrast mode Mode Purpose Custom Available to change all setting values. Suitable for color matching with sRGB compatible sRGB peripherals. Suitable for displaying texts for word processing or Text spreadsheets. Suitable for displaying images such as photos or picture Picture images. Movie Suitable for playing
Summary of the content on the page No. 20
Attention Attention ● To perform advanced adjustments • • W Wait 30 minutes or more from ait 30 minutes or more from Independent setting and saving of color adjustment are available for each monitor power on before starting monitor power on before starting FineContrast mode. adjustments. It is recommended adjustments. It is recommended to turn of to turn off the EcoV f the EcoView Sense to iew Sense to prevent the monitor from shifting to prevent the monitor from shifting to ● Adjustmen