Summary of the content on the page No. 1
/
Summary of the content on the page No. 2
SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2005 EIZO NANAO CORPORATION All rights reserved. No part of this
Summary of the content on the page No. 3
English TABLE OF CONTENTS PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1-1. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1-2. Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1-3. Controls & Connectors .
Summary of the content on the page No. 4
English PRECAUTIONS IMPORTANT! This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] WARNING If the unit begins to emit smoke, smells like
Summary of the content on the page No. 5
English WARNING Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit checked by a qualified service engineer before using it again. Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and re
Summary of the content on the page No. 6
English WARNING The equipment must be connected to a grounded main outlet. Not doing so may result in fire or electric shock. Use the correct voltage. The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or equipment damage. Do not overload your power circuit, as this may result in fire or electric shock. Handle the power cord with care. Do not place the cord underneath the unit or oth
Summary of the content on the page No. 7
English CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. OK OK Do not block the ventilation slots on the cabinet. Do not place any objects on the ventilation slots. Do not
Summary of the content on the page No. 8
English LCD Panel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen. This is due to the characteristics of the panel itself, and not the product. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. Do not
Summary of the content on the page No. 9
English 1. INTRODUCTION Thank you very much for choosing an EIZO Color Monitor. 1-1. Features Dual inputs compliant DVI (p. 37) Digital input (TMDS (p. 38)) compliant. [Horizontal scanning frequency] Analog: 24.8 - 80 kHz Digital: 31 - 64 kHz [Vertical scanning frequency] Analog: 50 - 75.1 Hz Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz) [Resolution] 1280 dots × 1024 lines Auto Adjustment compliant FineContrast modes, to select the most suitable mode for screen display (p. 19) The EIZO LCD U
Summary of the content on the page No. 10
English 1-3. Controls & Connectors Front (1) FineContrast Menu (3) (2) Control Panel (4) (5) (6) (7) (8) (9) (10) ® (1) ScreenManager Monitor Adjustment menu. Volume Control: Press the Right and Left buttons. Mute: Press the Up or Down button after pressing the (2) Speaker right or left button to display the volume control bar. Press the Right or Left button to mute off. (3) Headphone Jack Connect the Headphone. (Stereo Mini-jack) (4) Input Signal Switch the input signals when connecting 2
Summary of the content on the page No. 11
English Rear (15) (16) (17) (11) (12) (13) (14) (11) Power Connector Connect the power cord. (12) External Line In Connect the stereo mini-jack cable. (Stereo Mini-jack) (13) DVI-D Input Connect the digital cable (FD-C39). Connector (14) D-Sub mini 15 pin Connect the enclosed analog cable (MD-C87). Input Connector The LCD monitor can be used with an optional (15) 4 Holes for Mounting arm stand by removing the stand (see an Arm-Stand “5. ATTACHING AN ARM STAND”). Allows for connection o
Summary of the content on the page No. 12
English 2. CABLE CONNECTION 2-1. Before Connecting Before connecting your monitor to the PC, change the display screen settings (resolution (p. 38) and frequency) in accordance with the charts below. NOTE The lower display modes like 640 × 480, automatically enlarge to the maximum display mode (1280 × 1024), and some lines of the characters may become fuzzy. In this case, use (p. 25) function to make the lines clear. When your computer and display support VESA DDC, the suitable
Summary of the content on the page No. 13
English 2-2. Connecting the Signal Cable NOTE Before connecting the product, set up the monitor after unfolding the base of the stand. Be sure that the power switches of both the PC and the monitor are OFF. How to Adjust the Monitor or Angle Grip both side of the monitor firmly with both hands and adjust the monitor height or angle as desired. 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After co
Summary of the content on the page No. 14
English Digital Input Power Cord Signal Cable Connector of the PC PC FD-C39 (enclosed) Video Output Macintosh (DVI) Connector/ DVI-I Digital graphics card NOTE The monitor is not compatible with a Power Mac G4/G4 Cube ADC (Apple Display Connector). 2. Plug the power cord into the power connector on the rear of the monitor. Then, plug the other end of the cord into a power outlet. WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to rema
Summary of the content on the page No. 15
English 3. Turn on the monitor’s main power and then switch on the PC’s power. The monitor’s power indicator will light up (blue). If an image does not appear, refer to the “6. TROUBLESHOOTING” (p. 30) for advice. Whenever finished, turn off the PC and the monitor. NOTE Adjust brightness of the screen depending on the brightness of your environment. Too dark or too bright of a screen can cause eyestrain. Be sure to take adequate rests. A 10-minute rest period each hour is suggested. 2-3.
Summary of the content on the page No. 16
English 2. Connect the other side of stereo mini-jack cable to the line out of audio devices. Computer or CD Player Sound Control Audio performance is available by connecting the headphone to the Headphone jack (When headphones are connected, no sound can be heard from the speakers). Adjust the sound as below. Volume Control Volume control Press the Right and Left buttons. Mute Press the Up or Down button after pressing the Right or Left button to display the volume control bar. Mute off Pr
Summary of the content on the page No. 17
English 3. SCREENMANAGER 3-1. How to use the ScreenManager ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. Control Buttons Left, Down, Up, [Ex.] Custom Main Menu Right FineContrast Menu FineContrast Auto Adjustment Button Button Enter Button NOTE Main Menu and FineContrast Menu cannot be activated at the same time. 1. Entering the ScreenManager Push the Enter button once to display the main menu of the ScreenManager. 2. Making
Summary of the content on the page No. 18
English 3-2. ScreenManager Adjustments and Settings The following table shows all the ScreenManager’s adjustment and setting menus. “*” indicates adjustments of analog input only and “**” indicates digital input only. Main menu Sub menu Reference Screen Clock * 4-1. Screen Adjustment (p. 22) Phase * Position * Range Adjustment * Smoothing Color Brightness 4-2. Color Adjustment (p. 25) 1 (Custom)* Temperature Gamma Saturation Hue Gain Reset Sound Volume Control the sound volume. Mute Mute the so
Summary of the content on the page No. 19
English 3-3. FineContrast This function allows you to select the best suited mode for screen display. To select the Mode Directly pressing the FineContrast button allows you to select the best suited mode for screen display from 5 FineContrast modes; Custom, sRGB, Text, Picture and Movie. Exit Push the Enter button to exit the menu. Leaving the FineContrast button untouched more than 5 seconds also exits the menu. FineContrast Mode Selectable FineContrast modes are as follows. Custom To adjust
Summary of the content on the page No. 20
English 3-4. Useful Functions Adjustment Lock Use the “Adjustment Lock” function to prevent any accidental changes. Locked function Settings in the ScreenManager Auto adjustment button adjustments Unlocked function Power button Selecting of the FineContrast mode by the FineContrast button Brightness adjustment by Control buttons Sound control by the Control buttons Input signal selection button [To lock] Switch off the monitor’s power by the Power button. Press on the Auto adjustment but
