Summary of the content on the page No. 1
Cover
Important
Please read PRECAUTIONS, this User’s Manual, and the Setup Guide
(separate volume) carefully to familiarize yourself with safe and
effective usage.
• Please refer to the Setup Guide for basic information ranging from
connection of the monitor to a PC to using the monitor.
• The latest User’s Manual is available for download from our web site:
http://www.eizo.com
Summary of the content on the page No. 2
Location of Caution Statement This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation. EIZO Corporation is under no obligation to hold any submitt
Summary of the content on the page No. 3
Notice for this monitor This product is suited to general purposes like creating documents, viewing multimedia content. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual. The specifications noted in this manual are only applicable when the following are
Summary of the content on the page No. 4
Cleaning Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel. Note • The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface. The stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with water. To use th
Summary of the content on the page No. 5
CONTENTS 3-1. Enabling / Disabling DDC/CI Cover ...................................................................... 1 communication .......................................... 25 Notice for this monitor ......................................... 3 3-2. Locking Operation Buttons ....................... 25 Cleaning .................................................................... 4 3-3. Setting Orientation ..................................... 26 To use the monitor comfortably ..............
Summary of the content on the page No. 6
Trademark ............................................................... 44 License / Copyright ................................................ 44 ENERGY STAR ........................................................ 45 TCO .......................................................................... 45 FCC Declaration of Conformity ............................ 46 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor ............................47 Hinweis zur Ergonomie : ..............
Summary of the content on the page No. 7
Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • Supports a resolution of 1600 × 1200 • IPS panel with 89˚ horizontal and vertical viewing angles • Applicable to DisplayPort (applicable to 8 bit) • The FineContrast function allows the user to select the display mode optimum to the displayed image. - The Paper mode reproduces a printed paper effect on the monitor. See “To select the display mode (FineContrast Mode)” (page 14). • The software “Scre
Summary of the content on the page No. 8
1-2. Controls and Functions Front ● * 1 S e t t i n gm e n u 1 1 2 2 3 3 4 4 5 6 7 8 9 1. Ambient light sensor D e t e c t s a m b i e n t b r i g h t n e s s ( A u t o E c o V i e w f u n c t i o n (p a g e 2 9 ) ) . D i s p l a y s t h es e t t i n gm e n uo f t h ep o w e rs a v i n g f u n c t i o n ( A u t o E c o V i e w (p a g e 2 9 ) a n d 2. button E c o V i e w O p t i m i z e r 2(p a g e 2 9 ) ) . 3. button S w i t c h e s i n p u t s i g n a l s
Summary of the content on the page No. 9
Rear ● 15 13 14 16 10 1 1 12 10. Power connector C o n n e c t s t h ep o w e rc o r d . Le f t : D i s p l a y P o r t c o n n e c t o r/ C e n t e r : D V I - Dc o n n e c t o r /R i g h t : D - S u b m i n i 1 5 - p i n 11. Input signal connector c o n n e c t o r 12. USB port (UP) C o n n e c t s t h e U S B c a b l e f o r u s i n g t h e U S B H u b f u n c t i o n (p a g e 3 7 ) . 13. Security lock slot C o m p l i e s w i t h K e n s i n g t o n ’ s M i c
Summary of the content on the page No. 10
1-4. Basic Operations and Functions Basic operation of the Setting menu ● Displaying the Setting menu 1. 1. Press . The Setting menu appears. Adjusting / Setting 2. 1. Choose a menu to adjust / set with , , and then press . The Sub menu appears. 2. Choose an item to adjust / set with , , and then press . The adjustment / setting menu appears. 3. Adjust / set the selected item with , , and then press . Exiting 3. 1. Choose “Return” from the Sub menu and press . The Setting menu appears. 2. Ch
Summary of the content on the page No. 11
Functions ● The following table shows the Setting menu and setting items of each menu. Main menu Setting Reference * 1 C o l o r B r i g h t n e s s “ 2 - 3 . A d j u s t i n g C o l o r ” (p a g e1 4 ) C o n t r a s t T e m p e r at u r e G a m m a A d v a n c e d S e t t i n g s S at u r at i o n H u e O v e r d r i v e G a i n C o l o r R e s e t “ T o re s e t t h e c o l o r a d ju s t m e n t s ” ( p ag e 2 7 ) S c r e e n S c r e e n S i z e “ S c r e e n S i z e
Summary of the content on the page No. 12
Chapter 2 Adjusting Screens 2-1. Compatible Resolutions The monitor supports the following resolutions. Analog Input (D-Sub) ● Vertical Scan Resolution Applicable Signals Dot Clock Frequency 6 4 0×4 0 0 P C - 9 8 0 1 , P C - 9 8 2 1A P 2 ~ 7 0 H z 6 4 0 ×4 8 0 V G A , V E S A ,M A C ~ 7 5 H z 7 2 0 × 4 0 0 V G A T E X T 7 0H z 8 0 0× 6 0 0 V E S A ~ 7 5 H z 8 3 2×6 2 4 M A C 7 5 H z 1 6 2 M H z 1 0 2 4 ×7 6 8 V E S A ~ 7 5 H z ( M a x . ) 1 1 5 2 ×8 6 4 V E S A 7 5
Summary of the content on the page No. 13
2-2. Setting the Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. Windows 8 / Windows 7 ● 1. For Windows 8, click the “Desktop” tile on the Start Screen to display the desktop. 2. Right-click the mouse anywhere on the desktop except for icons. 3. From the displayed menu, click “Screen resolution”. 4. On the “Screen Resolution” dialog box, select the monitor. 5. Click “Resolution” t
Summary of the content on the page No. 14
2-3. Adjusting Color To select the display mode (FineContrast Mode) ● This function allows easy selection of a desired mode according to monitor application. Display Modes Mode Purpose U s e r 1 S e l e c tt h i s t od e fi n ead e s i r e d s e t o f p a r a m e t e r s e t t i n g s . U s e r 2 s R G B S u i t a b l e f o r c o l o r m at c h i n gw i t hs R G B c o m p at i b l e p e r i p h e r a l s . P a p e r Pr o d u c e s a p r i n t e d p a p e r e f f e c t .
Summary of the content on the page No. 15
To perform advanced adjustments ● The “Color” menu of the Setting menu allows you to set and save the independent color adjustment for each mode. Attention • It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more after the monitor power has been turned on, and then adjust the monitor. • Perform the range adjustment first when adjusting color for analog signals (see “To adjust color gradation automatically” (page 23)). • The same image m
Summary of the content on the page No. 16
To adjust contrast ● The brightness of the screen is adjusted by varying the video signal level. Adjustable range 0 to 100 Procedure 1. Choose “Color” in the Setting menu, and press . 2. Choose “Contrast” in the “Color” menu, and press . The “Contrast” menu appears. 3. Use or for adjustment. 4. Press to exit. Note • In the contrast of 50, every color gradation is displayed. • When adjusting the monitor, it is recommended to perform the brightness adjustment which may not lose the gradation
Summary of the content on the page No. 17
To adjust gamma ● Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the brightness of the monitor is called as “Gamma correction”. Adjustable range 1.8, 2.0, 2.2 Procedure 1. Choose “Color” in the Setting menu, and press . 2. Choose “Gamma” in the “Color” menu, and press . The “Gamma” menu appears. 3. Use or for adjustment. 4. Press
Summary of the content on the page No. 18
To adjust hue ● This function allows you to adjust hue. Adjustable range -50 to 50 Procedure 1. Choose “Color” in the Setting menu, and press . 2. Choose “Advanced Settings” in the “Color” menu, and press . 3. Choose “Hue” in the “Advanced Settings” menu, and press . The “Hue” menu appears. 4. Use or for adjustment. 5. Press to exit. Attention • Using this function may make some color gradations unavailable for display. To set overdrive intensity ● This function allows you to set overdrive
Summary of the content on the page No. 19
To adjust gain ● The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of “white” by adjusting gain. Adjustable range 0 to 100 Procedure 1. Choose “Color” in the Setting menu, and press . 2. Choose “Advanced Settings” in the “Color” menu, and press . 3. Choose “Gain” in the “Advanced Settings” menu, and press . The “Gain” menu appears. 4. Adjust gain with or for each of red, green, and blue. 5. Press to exit. Attention • Using this function may
Summary of the content on the page No. 20
2-4. Screen Adjustment Digital Signal Input ● When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if characters and / or lines appear blurred, go to “To modify blurred characters / lines” (page 23). When performing more advanced adjustment, see “2-3. Adjusting Color” (page 14) and subsequent pages. Analog Signal Input ● Attention • It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or m