Summary of the content on the page No. 1
Dell™ E2011H Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Troubleshooting
Appendix
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your monitor.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury or death.
Information in
Summary of the content on the page No. 2
Back to Contents Page About Your Monitor Dell™ E2011H Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capability LCD Monitor Quality and Pixel Policy Maintenance Guidelines Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some feature
Summary of the content on the page No. 3
l DVI Cable l Drivers and Documentation media l Quick Setup Guide l Product and Safety Information Guide Product Features The Dell™ E2011H flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features include: ■ 50.8 cm (20-inch) viewable area display (Measured diagonally). 1600 X 900 resolution, plus full-screen support for lower resolutions. ■ Tilt adjustment capability. ■ Removable pedestal and V
Summary of the content on the page No. 4
Front View Front panel controls Label Description 1 Preset Modes (default, but configurable) 2 Brightness & Contrast (default, but configurable) 3 Menu 4 Exit 5 Power button (with power light indicator) Back View Back view Back view with monitor stand Label Description Use VESA mounting holes (100 mm x 100 mm - 1 Wall mount monitor using VESA-compatible wall mount kit (100 mm x 100 mm). behind attached VESA Plate) 2 Regulatory label Lists the regulatory approvals. 3 Stand release butto
Summary of the content on the page No. 5
Left view Right view Bottom View Bottom view Label Description Use 1 AC power connector To connect the monitor power cable. 2 VGA connector To connect your computer to the monitor using a VGA cable. 3 DVI connector To connect your computer to the monitor using a DVI cable. 4 Stand lock To disable the stand release button and lock the stand assembly using an M3 machine screw. Monitor Specifications Flat Panel Specifications Model E2011H Screen type Active matrix - TFT LCD Panel typ
Summary of the content on the page No. 6
Color gamut (Typical) 79%* (CIE1976) *[E2011H] color gamut (typical) is based on CIE1976 (79%) and CIE1931 (68%) test standards. Resolution Specifications Model E2011H Horizontal scan range 30 kHz to 83 kHz (automatic) Vertical scan range 56 Hz to 75 Hz (automatic) Maximum resolution 1600 X 900 at 60 Hz Video Supported Modes Model E2011H Video display capabilities (DVI playback) 480p, 576p, 720p, 1080p and 1080i Preset Display Modes Horizontal Frequency Vertical Frequency Pixel Clock Sy
Summary of the content on the page No. 7
Width 481.51 mm (18.96 inches) Depth 60.00 mm (2.36 inches) Stand dimensions Height 291.66 mm (11.48 inches) Width 251.10 mm (9.89 inches) Depth 151.70 mm (5.97 inches) Weight Weight with packaging 5.50 kg (12.13 lb) Weight with stand assembly and cables 4.42 kg (9.73 lb) Weight without stand assembly (For wall mount or VESA mount 2.90 kg (6.38 lb) considerations - no cables) Weight of stand assembly 1.11 kg (2.45 lb) Environmental Characteristics Model E2011H Temperature Operating 0° to 40
Summary of the content on the page No. 8
Pin Assignments VGA Connector Pin 15-pin Side of the Connected Signal Number Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 Computer 5V/3.3V 10 GND-sync 11 GND 12 DDC data 13 H-sync 14 V-sync 15 DDC clock DVI Connector Pin 24-pin Side of the Connected Signal Number Cable 1 TMDS RX2- 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1- 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5V/+3.3V powe
Summary of the content on the page No. 9
15 Self test 16 Hot Plug Detect 17 TMDS RX0- 18 TMDS RX0+ 19 TMDS Ground 20 Floating 21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock- Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic
Summary of the content on the page No. 10
Back to Contents Page Appendix Dell™ E2011H Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Information Guide. FCC Notices (U.S. Only) and Other R
Summary of the content on the page No. 11
Back to Contents Page Help on PowerNap Installation To install PowerNap succesfully, follow these steps:- ® ® 1. Check Operating System Requirements Windows XP, Windows Vista , Windows 7 2. Install Entech API Install 3. Install PowerNap Software Install Back to Contents Page
Summary of the content on the page No. 12
Back to Contents Page Setting Up Your Monitor Dell™ E2011H Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1600 X 900 again. NOTE: If you are unable to set the resolution to 1600 x 900, please contact Dell™ to inquire about a Graphics Adapter that
Summary of the content on the page No. 13
Back to Contents Page Setting Up Your Monitor Dell™ E2011H Monitor If you have non Dell™ desktop, portable computer, or graphic card In Windows XP: 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 5. Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVI
Summary of the content on the page No. 14
Back to Contents Page Operating the Monitor Dell™ E2011H Monitor User's Guide Using the Front Panel Controls Using the On-Screen Display (OSD) Menu PowerNap Software Setting the Maximum Resolution Using the Dell Soundbar (Optional) Using the Tilt Using the Front Panel Controls Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of
Summary of the content on the page No. 15
save mode. Power (with power light indicator) Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear. 1. Press the MENU button to launch the OSD menu and display the main menu. Main Menu for Analog (VGA) Input or Main Menu for Di
Summary of the content on the page No. 16
Use this menu to activate Brightness/Contrast adjustment. Brightness/Contrast Brightness Brightness adjusts the luminance of the backlight. Press the button to increase brightness and Press the button to decrease brightness (min 0 ~ max 100). NOTE:Brightness control will be greyed out during "Screen dim" in PowerNap option when screen saver is activated.
Summary of the content on the page No. 17
Summary of the content on the page No. 18
Summary of the content on the page No. 19
Summary of the content on the page No. 20
Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary. Press the button to increase contrast and Press the button to decrease contrast (min 0 ~ max 100). The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen. AUTO ADJUST Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup. Auto Adj
