Summary of the content on the page No. 1
ConnectPRO
StreamLine Console
User Guide
For Models:
SL-01
SL-18
SL-208
SL-116
Summary of the content on the page No. 2
Table of Contents n INTRODUCTION l Overview…………………………………………………………………………………..1 n STREAMLINE CONSOLE l Overview…………………………………………………………………………………..2 l Features………….………………………………………………………………………..2 l Packing List…………………………………………………………………………….….3 l Assembly…………………………………………………………………………………..4 l Installation…………………………………………………………………………………7 l Front Panel………………………………………………………………..………………8 l Specification……………………………………………………………………………….9 Please read this manual thoroughly and follow the Installation procedures t
Summary of the content on the page No. 3
StreamLine Console ------------------------ ------------------------ Introduction Introduction l Overview The StreamLine offers the ultimate in styling and computer management. With a keyboard, mouse, TFT LCD panel and an 8-port KVM switch housed in an industry standard 19" 1U-height rack drawer, it saves you up to 1/3 of valuable real estate from a rack cabinet. Better yet, when the StreamLine Console is cascaded with other StreamLine KVM switches to increase server management capacity, you s
Summary of the content on the page No. 4
StreamLine Console ------------------------ ------------------------ StreamLine Console StreamLine Console l Overview The StreamLine Console is a 19” 1U drawer designed for applications where space is at a premium, or CRT displays are undesirable. It features a 15” flat panel TFT display, keyboard and a touch pad. The drawer can be pulled out for operation from the rack on slides which latch in the extended position. When not in use, the display can be folded down, locked and secured while pushe
Summary of the content on the page No. 5
StreamLine Console l Packing List These are required to install the StreamLine Console: n StreamLine Console: assembled "LCD panel + keyboard + mouse pad" drawer n Rear bracket & extension kit: This kit contains two pieces of rear brackets and two pieces of aluminum blocks. Make sure you have the correct kit to fit the depth of your cabinet. Note: the following length is measured between "front pole and rear pole inside a rack cabinet" not the outside depth of a rack cabinet enclosure. RES-1 R
Summary of the content on the page No. 6
StreamLine Console l Assembly 1. Choose a proper position for the rack drawer. Mount the rear brackets (from the Rear bracket & extension kit), and lightly fasten them onto the rear vertical poles. Both will be removed later. 2. Remove the stopper from the assembled drawer. The stopper is designed to refrain the drawer from sliding out during transportation. 3. Slide the assembled drawer to the rack cabinet from the front and insert the two slide rails of the assembled drawer into the pockets
Summary of the content on the page No. 7
StreamLine Console 5. Remove the rear brackets. Now, the front brackets hold the assembled drawer. 6. Attach the aluminum extensions (from the Rear bracket & extension kit) to both sides of the KVM module box. Please note the length of the aluminum extensions and mount them in one of the following ways. Short aluminum extensions attachment Long aluminum extensions attachment 7. Slide the rear brackets onto the aluminum extensions. And, then insert both slide rails of the a
Summary of the content on the page No. 8
StreamLine Console 8. Push the rear brackets all the way in and fasten them. 9. Slide the assembled drawer out. Push the KVM module box evenly toward the drawer, and then lock both units by the screws. 10. Make sure the C-36 connectors are firmly mated during step 10. 11. Connect the power supply to the power jack on the KVM module to complete the installation.
Summary of the content on the page No. 9
StreamLine Console l Installation Consider the StreamLine Console as a set of keyboard, mouse and monitor, and connect it directly to a computer. StreamLine Console connects to a computer Or, the StreamLine Console can be connected to a Master-IT PRO KVM switch as shown below. StreamLine Console connects to a Master-IT PRO KVM switch
Summary of the content on the page No. 10
StreamLine Console l Front Panel n KVM Control and Status: (This section is effective only when a KVM switch module is connected.) 1. Computer Selection Pad Press one of these pushbuttons to select a computer. 2. Selected Computer Indicator One of the indicators turns red when pushbuttons, hotkey or OSD menu selects a corresponding computer. 3. Local Console in operation It turns green when a computer is accessed through the StreamLine Console. 4. Remote Console in operation It turns green when
Summary of the content on the page No. 11
StreamLine Console l LCD Panel Specification LCD size 15.1” TFT Active Display Area 304.1 x 228.1 (mm) Pixel Pitch (mm) 0.297 (H) x 0.297 (V) Resolution 1024 x 768 @60/70/75Hz Brightness 200 cd/M^2 Contrast Ratio 400 Display Color 16.7M (8 bits) User Control OSD Control (auto saving) Input Signal RGB analog, H/V separate Plug-n-Play VESA VESA DDC 1/2B Power Management VESA DPMS compliant “on” mode: 23.2W “stand-by” mode <= 1W “suspend” mode <= 1W “off” mode <= 1W Viewing Angle (left/right) +80 ~
Summary of the content on the page No. 12
StreamLine Console Limited Warranty IN NO EVENT SHALL THE ConnectPRO’s LIABILITY FOR DIRECT OR INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFIT, LOSS OF BUSINESS, OR FINANCIAL LOSS WHICH MAY BE CAUSED BY THE USE OF THE PRODUCT EXCEEDS THE PRICE PAID FOR THE PRODUCT. ConnectPRO makes no warranty or representation, expressed or implied with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness fo
Summary of the content on the page No. 13
StreamLine Console 20525 Paseo Del Prado Walnut, CA 91789 (909) 444-9288 www.connectpro.com info@connectpro.com
