Audiovox LCM-0565 user manual

Summary of the content on the page No. 1

LCM-0565
5.6" Active Matrix LCD Monitor
AUDIO OX
Owner’s Manual

Summary of the content on the page No. 2

EXPLANATION OF GRAPHIC SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with the arrowhead within a triangle is intended to alert tell the user that parts inside the product are capable of producing an electric shock . The exclamation point within a triangle is intended to alert the user that important operating and s

Summary of the content on the page No. 3

SPECIFICATIONS 1. Type: Color Liquid Crystal Display (LCD) Monitor 2. Display Screen Size: 5.6 inches (114.2 x 83mm) ( W x H ) Element : TFT LCD Format : 960 (W) x 234 (H) dot Total 224,640 dot 3. Back Light: Cold Cathode Fluorescent Lamp 4. Power Source: +12 VDC 5. Power Consumption: 11W 6. Connection Terminals: Video Input Jack (RCA) External Power Jack (DC IN 12V) IR Jack 7. Operating Temperature: 32°F - 104°F (0°C - 40°C) 8. Storage Temperature: -4°F - 176°F (-20°C - +80°C) 9. Cabinet Dimens

Summary of the content on the page No. 4

CONTROLS AND INDICATORS FRONT PANEL 1 2 3 4 5 6 AUDIO OX 1. Power On LED Indicator 2. Power On/Off Switch 3. Remote Control Sensor 4. Picture Select 5. On Screen Adjustment Up Button 6. On Screen Adjustment Down Button 4

Summary of the content on the page No. 5

REAR PANEL 8 7 10 9 7. Power Input Connector: Red = +12 VDC Black = ground 8. Video Signal Input Connector 9. IR Repeater Connector 10. IR Repeater Transmitter NOTE: This cable (10) is utilized to connect to Video Cassette Players that do not accept the IR Repeater 1/8" (3.5mm) style plug (9). The IR Repeater Transmitter is provided with an adhesive that allows it to adhere to Video Cassette Player remote sensor. Remove the backing covering the adhesive and place the IR Repeater Transmitter di

Summary of the content on the page No. 6

OPERATION 1. Connect the monitor power input plug (7) to a DC power source (Red plug +12 VDC, Black plug (-) to ground). 2. Connect the external video source output signal (from VCP/ DVD, TV Etc.) to the VIDEO IN jack (8). 3. Press power On/Off button (2) to the On position. The LED power indicator will light red. 4. Press the Picture Select button (4) to adjust the picture display characteristics. The adjustments will be shown on the On Screen Display in the following sequence: Contrast, Brig

Summary of the content on the page No. 7

6. Headrests will have to be cut to install the screen assembly housing. Caution - Do not over-cut the headrest beyond the height and width of the housing. 7. To fasten the housing to the headrest, use either screws or tie wraps. Find a suitable mounting surface in the headrest to secure the housing. Caution - Use the proper length screws, which will vary with each headrest. If a suitable mounting surface cannot be found, use tie wraps to secure the housing. 8. Attach the wiring to the screen,

Summary of the content on the page No. 8

CAUTION 1. Do not operate the monitor at temperatures below 32°F (0°C) or above 104°F (40°C). 2. Keep the monitor clean and dry. 3. Always seek qualified personnel to perform repairs. Never attempt your own repairs. 4. Do not drop the monitor or expose to strong impacts. 5. Do not expose to direct sunlight for extended periods of time. © 2000 Audiovox Corp., Hauppauge, NY 128-5775