Summary of the content on the page No. 1
VS278 series
LCD Monitor
User Guide
Summary of the content on the page No. 2
First Edition June 2012 Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). Product warranty or service will not be extended if: (1) the
Summary of the content on the page No. 3
Contents Notices ......................................................................................................... iv Safety information ....................................................................................... v Care & Cleaning .......................................................................................... vi Takeback Services ..................................................................................... vii Chapter 1: Product introduction 1.1 Welcome
Summary of the content on the page No. 4
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide r
Summary of the content on the page No. 5
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. • Before using the product, make sure al
Summary of the content on the page No. 6
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cl
Summary of the content on the page No. 7
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package. Takeback Services ASUS recycling and takeback prog
Summary of the content on the page No. 8
viii
Summary of the content on the page No. 9
1.1 Welcome! ® Thank you for purchasing the ASUS LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.2 Package contents Check your package for the following items: LCD monitor Monitor base Quick start guide Warranty card Power cord VGA cabl
Summary of the content on the page No. 10
1.3 Monitor introduction 1.3.1 Front view 1 2 3 4 5 6 7 7 1. • Activates the QuickFit function.(Please refer to 1.3.3 QuickFit Function). 2. button: • Selects a desired preset mode. • Exits the OSD menu or goes back to the previous menu when the OSD menu is active. • Automatically adjusts the image to its optimized position, clock, and phase by pressing this button for 2-4 seconds (for VGA mode only). 3. • Decreases values or moves your selection left/down. • Volumn hotkey 4. MENU butto
Summary of the content on the page No. 11
7. Power button/power indicator • Turns the monitor on/off. • The color definition of the power indicator is as the below table. Status Description Blue ON Amber Standby mode OFF OFF 1.3.2 Back view ON HDMI-2 HDMI-1 VGA 4 4 6 7 Rear connectors 1. AC-IN port. This port connects the power cord. 2. Power Switch. To switch the display on and off. 3. Displayport. This port is for connection for a DisplayPort compatible device. 4. HDMI port. This port is for connection with an HDMI compatible devic
Summary of the content on the page No. 12
1.3.3 QuickFit Function The QuickFit function allows users have a preview of the document or photo layout directly on screen without printing test copies. To activate QuickFit, press the QuickFit hotkey, and then press the MENU key to switch between different pattern sizes. Alignment Grid Letter Photo 4x6, 3x5, 2x2 Photo 8x10, 5x7 When QuickFit is activated, press the control buttons on the front panel to make adjustments. The QuickFit OSD displayed in the lower right corner of the screen
Summary of the content on the page No. 13
ASUS VS278 LCD Monitor 1-5
Summary of the content on the page No. 14
1-6 Chapter 1: Product introduction
Summary of the content on the page No. 15
2.1 Assembling the monitor arm/base To assemble the monitor base: 1. Have the front of the monitor face down on a table. 2. Attach the base into the arm, making sure the tab on the arm fits into the groove on the base. 3. Fix the base to the arm by fastening the bundled screw. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. 2.2 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust t
Summary of the content on the page No. 16
2.3 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Remove the rubbers in the four screw holes. (Figure 1) 3. Remove the base (Figure 2). 4. Pry the rear hinge cover (Figure 3). 5. Use a screwdriver to remove the four screws on the hinge (Figure 4), then remove the hinge. 1 2 Figure 1 Figure 2 Figure 3 Figure 4 We recommend that you
Summary of the content on the page No. 17
2.4 Connecting the cables Connect the cables as the following instructions: HDMI-2 HDMI-1 VGA Displayport HDMI Audio-in VGA HDMI Earphone jack • To connect the power cord: connect one end of the power cord securely to the monitor’s AC input, the other end to a power outlet. • To connect the VGA/HDMI/DisplayPort cable: a. Plug one end of the VGA/HDMI/DisplayPort cable to the monitor’s VGA/ HDMI/DisplayPort port. b. Connect the other end of the VGA/HDMI/DisplayPort cable to your computer's
Summary of the content on the page No. 18
2-4 Chapter 2: Setup
Summary of the content on the page No. 19
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure 1. Press the MENU button to activate the OSD menu. 2. Press and to navigate through the functions. Highlight the desired function and press the MENU button to activate it. If the function selected has a sub-menu, press and again to navigate through the sub-menu functions. Highlight the desired sub-menu function and press the MENU button to activate it. 3. Press and to change the settings of the selected function. 4. To
Summary of the content on the page No. 20
2. Color You can adjust Brightness, Contrast, Saturation, Color Temp., Skin Tone, and Smart View from this menu. • Brightness: the adjusting range is from 0 to 100. is a hotkey to activate this function. • Contrast: the adjusting range is from 0 to 100. • Saturation: the adjusting range is from 0 to 100. • Color Temp.: contains four modes including Cool, Normal, Warm, and User Mode. • Skin Tone: contains three color modes including Reddish, Natural, and Yellowish. • Smart View: prov
