Summary of the content on the page No. 1
VW202/VW222 Series
LCD Monitor
User Guide
Summary of the content on the page No. 2
E3157 First Edition V1 August 2007 Copyright © 2007 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). Product warranty or service will not be extended i
Summary of the content on the page No. 3
Contents Notices ......................................................................................................... iv Safety information ...................................................................................... vi Care & Cleaning ........................................................................................ vii Chapter 1: Product introduction 1.1 Welcome! .................................................................................... 1-1 1.2 Package conten
Summary of the content on the page No. 4
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide r
Summary of the content on the page No. 5
TCO Development Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO’03 Display requirements: Ergonomics • Good visual ergonomics and
Summary of the content on the page No. 6
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. • Before using the product, make sure al
Summary of the content on the page No. 7
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild c
Summary of the content on the page No. 8
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package. viii
Summary of the content on the page No. 9
1.1 Welcome! ® Thank you for purchasing the ASUS VW202/VW222 Series LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the VW202/VW222 Series brings you! 1.2 Package contents Check your VW202/VW222 Series LCD monitor package for the following items: LCD monitor Quick start guide
Summary of the content on the page No. 10
1.3 Monitor introduction 1.3.1 Front view Base 1 2 3 4 5 1. Button: • Use this hotkey to switch from five video preset modes (Game Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with SPLENDID™ Video Enhancement Technology. • Exit the OSD menu or go back to the previous menu as the OSD menu is active. • Automatically adjust the image to its optimized position, clock, and phase by pressing this button for 2-4 seconds (for VGA mode only). 2. Button: • Press this
Summary of the content on the page No. 11
5. Power button/power indicator • Press this button to turn the monitor on/off • The color definition of the power indicator is as the below table. Status Description Blue ON Amber Standby mode OFF OFF 1.3.2 Back view Stereo Stereo speaker speaker Screw holes for VESA Wall Mount Rear connectors 1 2 3 4 Rear connectors 1. Audio-in port. This port connects PC audio source by the bundled audio cable. 2. AC-IN port. This port connects the power connector from the bundled powe
Summary of the content on the page No. 12
1-4 Chapter 1: Product introduction
Summary of the content on the page No. 13
2.1 Assembling the monitor base To assemble the monitor base: . Have the front of the monitor face down on a table. 2. Connect the base with the arm according to the below drawing. A click shows that the base has been connected successfully. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. 2.2 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle
Summary of the content on the page No. 14
2.3 Detaching the arm/base (for VESA wall mount) The detachable arm/base of the VW202/VW222 Series LCD monitor is specially designed for VESA wall mount. To detach the arm/base: . Have the front of the monitor face down on a table. 2. Remove the rubbers in the four screw holes (Figure ). 3. Use a screwdriver to remove the two screws on the arm (Figure ), then slide out the arm/base to detach it from the monitor (Figure 2). Rubbers in the screw holes Two screws Arm/base F
Summary of the content on the page No. 15
2.4 Connecting the cables . Connect the cables as the following instructions: • To connect the audio cable: connect one end of the audio cable to the monitor’s Audio-in port, the other end to the computer's audio-out port. • To connect the power cord: connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet. • To connect the VGA/DVI cable: a. Plug the VGA/DVI connector to the LCD monitor’s VGA/DVI port. b. Connect the other end of t
Summary of the content on the page No. 16
2- Chapter 2: Setup
Summary of the content on the page No. 17
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure . Press the MENU button to activate the OSD menu. 2. Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function selected has a sub-menu, press and again to navigate through the sub-menu functions. Highlight and activate the desired sub-menu function by pressing the MENU button. 3. Press and to change the settings of the
Summary of the content on the page No. 18
2. Image You can adjust brightness, contrast, sharpness, saturation,position (VGA only), ASCR, and focus (VGA only) from this main function. • Brightness: the adjusting range is from 0 to 00. is a hotkey to activate this function. • Contrast: the adjusting range is from 0 to 00. • ASCR: turns on/off the ASCR(ASUS Smart Contrast Ratio) function. • Sharpness: the adjusting range is from 0 to 00. • Saturation: the adjusting range is from 0 to 00. • Position: adjusts the
Summary of the content on the page No. 19
4. Input Select In this function, you can select either VGA or DVI input source. (Only for some models) 5. System Setup Allow you to adjust the system. • Volume: the adjusting range is from 0 to 00. is a hotkey to activate this function. • OSD Setup: *��� Adjusts Adjusts Adjusts the horizontal postition (H-Position)/ the vertical pos the the horizontal horizontal postition postition (H-Position)/ (H-Position)/ the the vertical vertical position position ition (V-Pos
Summary of the content on the page No. 20
3.2 Specifications summary (VW202U) Panel Type TFT LCD Panel size 20" (16:10) wide screen Max. Resolution WSXGA+ 1680 x 1050 Pixel pitch 0.258mm 2 Brightness (Typ.) 250cd/m 2 Brightness (Max.) 300cd/m Contrast Ratio (Typ.) 800:1 Contrast Ratio (Max.) 2000:1 (with ASCR ON) Viewing angle(H/V) CR>10 160˚/160˚ Display colors 16.7M Response time 2ms (Gray to Gray) SPLENDID™ Video Yes Enhancement SPLENDID™ selection 5 video preset modes (by hotkey) Auto adjustment Yes (by hotkey) Color temperature s
