Summary of the content on the page No. 1
Q5230 V1
January 2010
VB195/ VB191
VB175/ VB171 Series
LCD Monitor
User Guide
Summary of the content on the page No. 2
Table of contents Notices.......................................................................................................... iii Safety.information....................................................................................... iv Care.&.Cleaning............................................................................................ v Chapter.1:. Product.introduction. 1.1. Welcome!....................................................................................... 1-1 1.2. P
Summary of the content on the page No. 3
Notices Federal.Communications.Commission.Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide r
Summary of the content on the page No. 4
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. • Before using the product, make sure al
Summary of the content on the page No. 5
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild c
Summary of the content on the page No. 6
Where to find more information Refer to the following sources for additional information and for product and software updates. 1.. ASUS.websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2.. Optional.documentation Your product package may include optional documentation, such as warranty card, that may have been added by your dealer. These documents are not part of the standard package. vi
Summary of the content on the page No. 7
1.1 Welcome! ® Thank you for purchasing the ASUS VB195/ VB191/ VB175/ VB171 Series LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the VB195/ VB191/ VB175/ VB171 Series brings you! 1.2 Package contents Check your VB195/ VB191/ VB175/ VB171 Series LCD package for the followin
Summary of the content on the page No. 8
1.3 Assembling the monitor base To assemble the monitor base: 1. Connect the base with the monitor. A click indicates that the base has been connected successfully. . Adjust the monitor to the angle that is most comfortable for you. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. 1 2 1- Chapter 1: Product introduction
Summary of the content on the page No. 9
1.4 Monitor introduction 1.4.1 Front of the LCD monitor 1 2 3 4 5 6 1. button: • Automatically adjust the image to its optimized position, clock, and phase by long pressing this button for -4 seconds (for VGA mode only). • Use this hotkey to switch from five video preset modes (Game Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with SPLENDID™ Video Enhancement Technology. • Exit the OSD menu or go back to the previous menu as the OSD menu is acti
Summary of the content on the page No. 10
5. Power button • Press this button to turn the monitor on/off. 6. Power indicator • The color definition of the power indicator is as the below table. Status Description Blue ON Amber Standby mode OFF OFF 1.4.2 Rear of the LCD monitor Screw holes for VESA Wall Mount Rear connectors 1 2 3 4 Rear connectors (from left to right) 1. AC-IN port. This port connects the power connector from the bundled power cord. . Audio-in port. This port connects P
Summary of the content on the page No. 11
2.1 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • You can adjust the monitor’s angle from -5º to 20º. -5º~20º ASUS LCD Monitor VB195/ VB191/ VB175/ VB171 Series 2-
Summary of the content on the page No. 12
2.2 Detaching the arm/stand (for VESA wall mount) The detachable stand of the VB195/ VB191/ VB175/ VB171 Series LCD monitor is specially designed for VESA wall mount. To detach the arm/stand: . Remove the arm cover. 2. Have the front of the monitor face down on a table. 3. Use a screwdriver to remove the three screws on the stand of the monitor as the below drawing shows. 4. Detach the arm from the monitor. • We recommend that you cover the table surface with soft cloth to pr
Summary of the content on the page No. 13
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure . Press the MENU button to activate the OSD menu. 2. Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function selected has a sub-menu, press + and - again to navigate through the sub-menu functions. Highlight and activate the desired sub-menu function by pressing the MENU button. 3. Press and to change the settings o
Summary of the content on the page No. 14
2. Image You can adjust brightness, contrast, sharpness, saturation,position (VGA only), and focus (VGA only) from this main function. • Brightness: the adjusting range is from 0 to 00. is a hotkey to activate this function. • Contrast: the adjusting range is from 0 to 00. • Sharpness: the adjusting range is from 0 to 00. • Saturation: the adjusting range is from 0 to 00. • Swith ON or OFF THE ASCR function.(This function is for some models only) • Position: adju
Summary of the content on the page No. 15
4. Input Select In this function, you can select either VGA or DVI input source. (Only for some models) 5. System Setup Allow you to adjust the system. • Volume: the adjusting range is from 0 to 00. is a hotkey to activate this function. • OSD Setup: adjusts the horizontal postition (H-Position) and the vertical position (V-Position) of the OSD. The adjusting range is from 0 to 00. In the OSD Timeout selection, you can adjust the OSD timeout from 0 to 20.Fo
Summary of the content on the page No. 16
3.2 Specifications summary Model VB195T/S/D/N VB191T/S/D VB171T/S/D VB175T/S/D/N Panel Size 19" 19" 17" 17" Max. Resolution SXGA 1280x1024 SXGA 1280x1024 SXGA 1280x1024 SXGA 1280x1024 Brightness(Typ.) 250 300 300 250 Contrast Ct t 1000 1000:1(VB171T/S), 1(VB171T/S) 50000:1 1000:1 50000:1 Ration(Typ.) 700:1 (VB171D) Viewing Angle 170/160 170/160 160/160 170/160 (H/V), CR ≥10 Display Colors 16.7M 16.7M 16.7M 16.7M Response Time 5ms (Tr+Tf) 5ms (Tr+Tf) 5ms (Tr+Tf) 5ms (Tr+Tf) Analog input Yes Yes Y
Summary of the content on the page No. 17
3.3 Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. The power LED lights amber and there is no • Check if the monitor and the computer are screen image in the ON mode. • Make sure the signal cable is properly connected the monitor and the computer. • Inspect the signal cable and make sure
Summary of the content on the page No. 18
3.4 Supported operating modes Standard Resolution Frequency Horizontal Frequency (KHz) Pixel (MHz) 640x480@60Hz 31.469 25.175 VGA 640x480@72Hz 37.861 31.5 640x480@75Hz 37.5 31.5 800x600@56Hz 35.156 36 800x600@60Hz 37.879 40 SVGA 800x600@72Hz 48.077 50 800x600@75Hz 46.875 49.5 1024x768@60Hz 48.363 65 1024x768@70Hz 56.476 75 XGA 1024x768@72Hz 57.7 78.4 1024x768@75Hz 60.023 78.75 1024x768@75Hz 60.2 80 1152x870@75Hz 68.7 100 Mac 1152x864@75Hz 67.5 108 1280x960@60Hz 60 108 1280x
