Summary of the content on the page No. 1
Operation/Reference Guide
MVP-7500/8400
® ®
MVP-7500/8400 Modero ViewPoint Wireless Touch Panels
MVP-BP Power Pack
NXA-CFSP Compact Flash Card
Last Revised: 6/13/2008
Touch Panels & Accessories
Summary of the content on the page No. 2
AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. • Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a pe
Summary of the content on the page No. 3
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are de
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Table of Contents Table of Contents MVP Modero Viewpoint Wireless Touch Panels .................................................1 Overview .................................................................................................................. 1 MVP Specifications ................................................................................................... 2 MVP-BP Power Pack ...........................................................................................5 Overview ...
Summary of the content on the page No. 6
Table of Contents Using the Site Survey tool............................................................................................. 22 Step 2: Configure the Card’s Wireless Security Settings ........................................ 24 Configuring the Modero’s wireless card for unsecured access to a WAP200G ............. 25 Configuring the Modero’s wireless card for secured access to a WAP200G................. 27 Automatically set SSID .......................................................
Summary of the content on the page No. 7
Table of Contents Wireless Security Page .................................................................................................. 69 Open (Clear Text) Settings............................................................................................ 70 Static WEP Settings....................................................................................................... 71 WPA-PSK Settings.............................................................................................
Summary of the content on the page No. 8
Table of Contents Input mask ranges ....................................................................................................... 147 Input mask next field characters.................................................................................. 147 Input mask operations................................................................................................. 147 Input mask literals ..............................................................................................
Summary of the content on the page No. 9
MVP Modero Viewpoint Wireless Touch Panels MVP Modero Viewpoint Wireless Touch Panels Overview The MVP-7500 (7.5") and MVP-8400 (8.4") Modero Viewpoint Wireless Touch Panels (FIG. 1) are 802.11-based wireless handheld G4 touch panels, pre-installed with an 802.11 Wi-Fi Interface Card to communicate with a NetLinx Master via a standard 802.11b/g Wireless Access Point. MVP-7500 (FG5965-01) MVP-8400 (FG5965-02) FIG. 1 MVP-7500 and MVP-8400 Touch Panels Previous 802.11b versions of MVP panel
Summary of the content on the page No. 10
MVP Modero Viewpoint Wireless Touch Panels MVP Specifications The MVP-7500 (FG5965-01) utilizes a 7.5" Color Passive LCD to display a 640 x 480 pixel image with 4096 colors. The MVP-8400 panel (FG5965-02) utilizes an 8.4" Color Active LCD to display an 800 x 600 pixel resolution using 256K colors. Mini-USB connector programmable programmable Stylus LED status LED programmable programmable pushbuttons pushbuttons (joystick configuration) Stylus (fits within slot Microphone MVP-8400 only
Summary of the content on the page No. 11
MVP Modero Viewpoint Wireless Touch Panels MVP Specifications Memory (factory default): • 64 MB SDRAM • 64 MB Compact Flash (upgradeable to 1 GB - factory programmed) Weight: 1.85 lbs (0.84 kg) • with 1 battery: 2.25 lbs (1.02 kg) • with 2 batteries: 2.65 lbs (1.20 kg) MVP-7500 LCD • Aspect ratio: 4 x 3 Specifications: 2 • Brightness (luminance): 120 cd/m • Channel transparency: 8-bit Alpha blending • Contrast ratio: 20:1 • Display colors: 4096 colors (12-bit color depth) • Dot/pixel pitch: 0.
Summary of the content on the page No. 12
MVP Modero Viewpoint Wireless Touch Panels MVP Specifications Button Assignments: Button assignments can only be adjusted in TPD4 and not on the panels. • Button channel range: 1 - 4000 button push and feedback (per address port) • Button variable text range: 1 - 4000 (per address port) • Button states range: 1 - 256 (General Button; 1 = Off State, 2 = On State) • Level range: 1 - 600 (default level value 0-255, can be set up to 1-65535) • Address port range: 1 - 100 Operating / Storage • O
Summary of the content on the page No. 13
MVP-BP Power Pack MVP-BP Power Pack Overview The MVP-BP Power Pack (FG5965-20) is a rechargeable Lithium-Ion battery used to provide power to the MVP touch panels. One MVP-BP is included with each MVP-7500 touch panel. Two MVP-BPs are included with each MVP-8400 touch panel. FIG. 3 MVP-BP Power Pack MVP-BPs can be charged with either a Table Top Docking Station (MVP-TDS), Wall/Flush Mount Docking Station (MVP-WDS), or MVP panel itself. Extra MVP-BP Power Packs can be purchased separ
Summary of the content on the page No. 14
MVP-BP Power Pack Battery Compartment Cover Alignment Guide hole openings Battery connector Traction Grooves Battery pins Battery Battery slot 2 Removal Battery slot 1 Straps FIG. 4 Installing MVP-BP batteries into the MVP battery slots If you are only using one battery, use Battery Slot #1. 4. To replace the battery compartment cover, use the alignment guide holes to align the cover with the edges of the battery compartment, and slide it back into place until it snaps shut. 6 MVP-7500/8400 Mo
Summary of the content on the page No. 15
NXA-CFSP Compact Flash NXA-CFSP Compact Flash Overview Every MVP panel is shipped with a 64 MB Compact Flash card. Compact Flash Card - Security All security user names and passwords (for the docking station) are stored in the Compact Flash card. After installing the Compact Flash card upgrade, all security user names and passwords need to be re- entered to enable security. For this reason, it is recommended that you upgrade the card prior to setting up the security information for the docking
Summary of the content on the page No. 16
NXA-CFSP Compact Flash Battery Compartment cover Housing screws B Rear outer housing Bottom rim of outer housing Trim fits inside A the grooves around the edges of the panel Circuit board housing attachment locations (4) Panel FIG. 5 Removing the MVP enclosure (housing) Removing the Installed Card 1. Discharge any static electricity from your body by touching a grounded metal object and then locate the card slot on the main circuit board (FIG. 6). 2. Place the circuit board on a flat level su
Summary of the content on the page No. 17
NXA-CFSP Compact Flash Internal circuit board Card removal grooves (top view - detail) IR Emitters Compact Flash card A B Wireless Interface card FIG. 6 Location and orientation of the Compact Flash cards (both MVP panels) 2. Place the circuit board on a flat level surface so that the IR Emitters are pointing away from you (FIG. 6). 3. Insert the tip of a grounded flat-head screwdriver into one of the card removal grooves (located on either side of the existing Compact Flash card), and gently
Summary of the content on the page No. 18
NXA-CFSP Compact Flash 10 MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
Summary of the content on the page No. 19
Wireless Interface Cards Wireless Interface Cards 802.11b Wireless Interface Card MVP panels can connect to a wireless network using the 802.11b Wireless Interface Card (70-5965-02), pre-installed in MVP touch panel models. The 802.11b Wireless Interface Card is a 2.4 GHz Direct Sequence Spread Spectrum (DSSS) 802.11b 11M wireless PC card, with detachable antenna. FIG. 8 802.11b Wireless Interface Card The wireless interface card works with 802.11b/g Wireless Access Points, such as the
Summary of the content on the page No. 20
Wireless Interface Cards 802.11b Wireless Interface Card Specifications (Cont.) Power Consumption: • TX power consumption: < 265 mA • RX power consumption: < 165 mA • Sleep Mode: 2 mA - 15 mA Radio Data Rate: • 1Mbps, 2Mbps, 5.5Mbps, 11Mbps, Auto Rate Receive Sensitivity: • @PER < 8% 11 Mbps: -83 dBm (max) 5.5 Mbps: -86 dBm (max) 2 Mbps: -89 dBm (max) 1 Mbps: -92 dBm (max) RF Output Power: • 15 dBm +/- 1 dBm • Channels 1 - 11 (North America) Security: • WEP 64,128 bit, WPA/TKIP Wireless Restr
