Summary of the content on the page No. 1
PPC-L106T
AMD LX800 processor-based
Panel PC with 10.4" TFT LCD flat
panel display
User Manual
Summary of the content on the page No. 2
Copyright This document is copyrighted, © 2006. All rights are reserved. The origi- nal manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmit- ted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer a
Summary of the content on the page No. 3
FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence when the equipment is operated in a residential environment. This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance with this user manual, it may cause harmful interference to radio communications. Note
Summary of the content on the page No. 4
Packing List Before you begin installing your card, please make sure that the following materials have been shipped: PPC-L106T series panel PC Accessories for PPC-L106T - Keyboard extension cable (5-pin DIN female to 6-pin PS/2 male) - HDD flat cable (44-pin) (8 cm) - Power cord (1.8 m) - USA type - HDD bracket - Driver/Utility CD-ROM disk - Screws - Warranty card If any of these items are missing or damaged, co
Summary of the content on the page No. 5
Safety Instructions 1. Please read these safety instructions carefully. 2. Please keep this User Manual for later reference. 3. Please disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. 4. For pluggable equipment, the socket-outlet must be installed near the equip- ment and must be easily accessible. 5. Please keep this equ
Summary of the content on the page No. 6
Wichtige Sicherheishinweise 1. Bitte lesen sie Sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den späteren Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein. 5. Das Gerät ist vo
Summary of the content on the page No. 7
Contents Chapter 1 General Information ........................................2 1.1 Introduction ....................................................................... 2 1.2 Specifications .................................................................... 2 1.3 LCD Specifications ........................................................... 5 1.4 Dimensions........................................................................ 6 1.5 I/O Arrangement ............................................
Summary of the content on the page No. 8
3.5.1 COM2 RS-232/422/485 setting (J6)............................. 29 3.5.2 COM3/COM4 pin 9 output setting (J7)........................ 31 Chapter A I/O Pin Assignments.......................................42 A.1 Keyboard connector (CN5-1).......................................... 42 A.2 Mouse connector (CN5-2)............................................... 42 A.3 VGA connector (CN6) .................................................... 43 A.4 COM1 RS-232 serial port (CN1-2)....................
Summary of the content on the page No. 9
1 General Information This chapter gives background information on the PPC-L106T. Sections include: Introduction Specifications LCD Specifications Dimensions I/O Arrangement Cutout (Suggestion) Mounting Chapter 1 General Information 1 CHAPTER
Summary of the content on the page No. 10
Chapter 1 General Information 1.1 Introduction The PPC-L106T is a 10.4" LCD Panel PC with an AMD LX800 CPU that is designed to serve as a human machine interface (HMI). It is a PC-based system with 10.4" color TFT LCD display, on-board PCI Ethernet, multi- COM port interfaces, and a 16-bit audio controller. This simple, com- plete, compact and highly integrated multimedia system lets you easily build a panel PC into your applications. By incorporating the PPC-L106T into your project,
Summary of the content on the page No. 11
2nd level cache: 128 KB on CPU RAM: One 200-pin SODIMM sockets accept 256 ~ 1024 MB DDR PCI Bus Master IDE interface: Supports two connectors (one internal, one external). Each connector supports two IDE devices on two channels (PIO modes 3/4). BIOS supports IDE (PIO mode 0~4, DMA mode 0~2, and Ultra DMA33 simulta- neously). Default: CF Slot set as Master Parallel port: One parallel port, supports SPP/EPP/ECP parallel mode. Serial ports: Four serial ports with three RS-232 po
Summary of the content on the page No. 12
Ethernet Chipset: Realtek RTL8100C PCI local bus Ethernet con- troller fully compliant with IEEE 802.3u 10/100 Base-T speci- fications. Touchscreen (optional)* Type Analog Resistive Infrared Continuous 4096 x 4096 Resolution 80% 91% Light Transmission RS-232 interface Controller (uses COM4) Optional USB interface <5 V @ 200 mA 5 V @ 100 mA Power Consumption Supports Windows CE Supports Windows CE Software Driver /XP /XP 35 million 100,000 hrs Durability (touches in a lifetime)
Summary of the content on the page No. 13
1.3 LCD Specifications Default Optional 10.4" SVGA TFT 10.4" SVGA TFT Display type (LCD) 800 x 600 800 x 600 Max. resolution 262 K colors 262 K colors Colors 120 / 100 140 / 100 View angle 0.264 X 0.264 0.264 X 0.264 Dot size (mm) 230 400 Luminance (cd/mð) 0 ~ 50 0 ~ 50 Temperature (°C) Yes* Yes* VR controls Yes Yes Simultaneous mode 20,000 hours 50,000 hours Lamp Life (hrs) * The VR control is defined by hot key in DOS or BIOS mode as follows: Ctrl-Alt-F3, Ctrl-Alt-F4 Chapter 1 General Info
Summary of the content on the page No. 14
1.4 Dimensions Figure 1.1: PPC-L106T panel PC dimensions 6 PPC-L106T User Manual
Summary of the content on the page No. 15
1.5 I/O Arrangement Figure 1.2: PPC-L106T back panel I/O arrangement and cable connec- tions A. Power switch F. COM ports B. Parallel port G. COM ports C. PS/2 mouse connector H. VGA port D. Mic-in/Line-out I. USB ports V2.0 E. AC inlet J. Ethernet * Three RS-232 (COM1, 3, 4) and one RS-232/422/485 (COM2) Chapter 1 General Information 7
Summary of the content on the page No. 16
1.6 Cutout (Suggestion) The PPC-L106T will stand on a shelf or a table, or you can mount it into a panel. Cutout panel dimensions are as follows Figure 1.3: PPC-L106T panel mounting cutout dimensions 8 PPC-L106T User Manual
Summary of the content on the page No. 17
1.7 Mounting 1.7.1 Panel mounting If you decide to use a cutout within a panel to mount your PPC-L106T, we have included two panel-mount brackets. The brackets have two screws that fit in the keyhole slots on the panel PC. Slide the PPC-L106T backwards into the panel opening. Attach the two mounting brackets by sliding the two screw heads into the keyhole slots on the rear cover. Secure the PPC-L106T against the back of the panel opening. Figure 1.4: PPC-L106T rear panel mounting bracket
Summary of the content on the page No. 18
1.7.2 Desktop stand (optional) An optional stand is available for mounting the PPC as a desktop PC. The PPC-L106T slides into the stand and is held in place by the screws pro- vided. The compactness of the desktop-mounted PPC-L106T saves desk space. Figure 1.5: PPC-L106T desktop stand 10 PPC-L106T User Manual
Summary of the content on the page No. 19
1.7.3 Wall-mounting (optional) An optional wall-mounting attachment is also available for mounting the PPC at approximately 45° to a flat surface. Installation instructions fol- low: 1. The wall-mounting attachment is comprised of three parts: one back bracket, one support bracket, and one mounting bracket. 2. First attach the back bracket to the rear cover of the PPC-L106T, securing it in place with four of the philips-head screws provided. 3. Using a flat-head screwdriver, attach the suppor
Summary of the content on the page No. 20
12 PPC-L106T User Manual
