Summary of the content on the page No. 1
LCD MONITOR
quick start guide
700DXn
Summary of the content on the page No. 2
Select Language Main Page Model Safety Instructions Introduction Package Contents Your LCD Display Mechanical Layout Connections The color and appearance of the product may vary depending on the model, and the product specifications are Using the Software subject to change without prior notice for reasons of performance enhancement. Adjusting the LCD Display Troubleshooting Introduction Specifications Information Package Contents Appendix Note • Please make sure the followi
Summary of the content on the page No. 3
Batteries (AAA X 2) BNC to RCA Remote Control (Not available in all Adaptor Jack locations) Sold separately Wall Mount KIT DVI Cable BNC Cable LAN Cable Your LCD Display Front 1) MENU Opens the on-screen menu and exits from the menu or closes the adjustment menu. 2) Navigate buttons (Up-Down buttons) Moves from one menu item to another vertically or adjusts selected menu values. 3) Adjust buttons (Left-Right buttons)/ Volume buttons Moves from one menu item to another hori
Summary of the content on the page No. 4
• PC AV / S-Video / Component / HDMI Mode • BNC AV / S-Video / HDMI Mode • DVI AV / S-Video / Component Mode • AV / S-Video PC / BNC / DVI Mode • Component PC / DVI Mode • HDMI PC / BNC Mode 7) Power button Turns the LCD Display On/Off. 8) Brightness Sensor The product's Brightness Sensor function automatically detects the surrounding brightness using a brightness sensor and adjusts its brightness accordingly. 9) Power indicator Shows PowerSaver mode by blinking green. 10) Remote
Summary of the content on the page No. 5
2) REMOTE OUT/IN You can use a wired remote control by connecting it to your monitor. 3) RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port 4) DVI / PC / HDMI IN [HDMI/PC/DVI/BNC AUDIO IN](HDMI/PC/DVI/BNC Audio Connection Terminal (Input)) 5) DVI / PC / HDMI IN [HDMI] Connect the HDMI terminal at the back of your monitor to the HDMI terminal of your digital output device using a HDMI cable. 6) DVI / PC / HDMI IN [RGB] (PC Video Connection Terminal) Usi
Summary of the content on the page No. 6
Note • The number of LCD Displays that can be connected to loopout may differ depending on the cables, signal source etc. With cables where there is no degradation or signal source, up to ten LCD Displays can be connected. Note •See Connecting the LCD Display for further information regarding cable connections. Remote Control Note • The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display , causing a malfunction due
Summary of the content on the page No. 7
3) MDC MDC Quick Launch Button. 4) LOCK Activates or deactivates all function keys on both the remote control and the LCD Display except for the Power and LOCK buttons. 5) MagicNet buttons Used for MagicNet. • Alphanumeric: Used to enter the Internet address. • DEL: Functions as the backspace. • SYMBOL: Used to enter the symbols. (.O_-) • ENTER: Used to enter values. 6) +100 -/-- Press to select channels over 100. For example, to select channel 121, press "+100", then press "2" a
Summary of the content on the page No. 8
When pressing this button, the current mode is displayed at the bottom centre of the screen. The LCD Display has a built-in high fidelity stereo amplifier. Then press the button again to circle through available preconfigured modes. ( Standard → Music → Movie → Speech → Custom ) 21) STILL Press the button once to freeze the screen. Press it again to unfreeze. 22) FM RADIO Turns the FM Radio on/off. In PC/DVI mode, sets the SOUND to FM Radio. In general Video mode, selects FM Rad
Summary of the content on the page No. 9
Select Language Main Page Model Safety Instructions Introduction Connections Installing the Stand KIT Connecting the LCD Display The color and appearance of the product may vary depending on the model, and the product specifications are Using the Software subject to change without prior notice for reasons of performance enhancement. Adjusting the LCD Display Troubleshooting Connections Specifications Information Installing the Stand KIT Appendix Note • Only the supplied bolts
Summary of the content on the page No. 10
Using a Power cord with Earth In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect the AC power in advance. Note • AV input devices such as DVD players, VCR's or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the User Controls under Adjusting Your LCD
Summary of the content on the page No. 11
3) Connect the audio cable for your LCD Display to the audio port on the back of your computer. Note • Turn on both your computer and the LCD Display. Note • The DVI cable or BNC cable is optional. Contact a local Samsung Electronics Service Center to buy optional items. Connecting a VCR 1) AV input devices such as VCRs or Camcorders are connected via the AV IN [VIDEO] or AV IN [S-VIDEO] of the LCD Display using an S-VHS or BNC cable. 2) Connect the Audio (L) and Audio (R) terminals
Summary of the content on the page No. 12
1) Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and the AUDIO OUT jacks on the DVD player. 2) Connect a Component cable between the on the LCD Display and BNC/COMPONENT IN - PR, Y, PB port the PR, Y, PB jacks on the DVD player. Note •Select Component for the connection to a DVD player using the SOURCE button on the front of the LCD Display or on the remote control. • Then, start the DVD Player with a DVD disc inserted. Note • A component c
Summary of the content on the page No. 13
• The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables. Connecting a DTV Set Top Box Note • The connections for a typical Set Top Box are shown below. 1) Connect a Component cable between the BNC / COMPONENT IN - PR, Y, PB port on the LCD Display and the PR, Y, PB jacks on the Set Top Box. 2) Connect a set of audio cables between the COMPONENT A
Summary of the content on the page No. 14
• Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and the AUDIO OUT [L-AUDIO-R] on LCD Display. Connecting to a Wired Remote Control Note • You can control your monitor by allowing it to receive the remote control signals of other devices through the REMOTE OUT terminal. • You can control a device by allowing it to receive remote control signals from other devices through the REMOTE IN terminal. Note • Restrictions: Available only if other devices suppor
Summary of the content on the page No. 15
1) Connect the DVI output terminal of a digital output device to the HDMI IN terminal of the monitor using a DVI to HDMI cable. 2) Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite jack to the HDMI / PC / DVI-D AUDIO IN terminal of the monitor. Connecting a LAN Cable 1) Connect the LAN cable. Connecting a USB device 1) You can connect USB devices such as a mouse or
Summary of the content on the page No. 16
Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Adjusting the LCD Display Troubleshooting The color and appearance of the product may vary depending on the model, and the product specifications are Self-Test Feature Check subject to change without prior notice for reasons of performance enhancement. Check List Q & A Troubleshooting Specifications Information Self-Test Feature Check Appendix Note • Check the following items yourse
Summary of the content on the page No. 17
Maintenance and Cleaning 1) Maintaining the LCD Display Case. Clean with a soft cloth after disconnecting the power cord. • Do not use benzene, thinner or other flammable substances, or a wet cloth. • We recommend that a Samsung cleansing agent is used to prevent damage to the screen. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly. • Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screen surfac
Summary of the content on the page No. 18
The LCD Display screen flickers. Display is securely connected. (Refer to Connecting a Computer) Problems related to the Screen Note • Problems related to the LCD Display screen and their solutions are listed. Problems Solutions Ensure that the power cord is firmly connected and the LCD The screen is blank and the power LCD Display is on. indicator is off. (Refer to the Connecting the LCD Display ) Ensure that the signal cable is firmly connected to the PC or "Check Signa
Summary of the content on the page No. 19
• Problems related to audio signals and their solutions are listed below. Problems Solutions No sound. Ensure that the audio cable is firmly connected to both the audio-in port on your LCD Display and the audio-out port on your sound card. (Refer to the Connecting the LCD Display ) Check the volume level. Check the volume level. The sound level is too low. If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound car
Summary of the content on the page No. 20
Set the resolution in the Control Panel → Appearance and Themes → Display → Settings. Windows ME/2000: Set the resolution in the Control Panel → Display → Settings. * Contact the video card manufacturer for details. How can I set the Power Saving Windows XP: Set the resolution in the Control Panel → Appearance and function? Themes → Display → Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). Windows ME/2000: Set the reso
