Summary of the content on the page No. 1
Samsung
SyncMaster 700s
Color Monitor
Owner’s
Instructions
Summary of the content on the page No. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an eq
Summary of the content on the page No. 3
Table of Contents 2 Preface: Safety Information Chapter One: Overview of Your Monitor 3 3 Front Panel 4 Rear Panel Chapter Two: Installation 5 5 Connecting Your Monitor to a Computer Chapter Three: Adjusting Your Monitor 6 6 Overview Direct Access Features 6 6 Contrast 6 Brightness 7 Control Function Features Position(H/V) / User or Preset Model 7 8 Size( H/V) 8 Geometric Distortion (G/D) 9 Color Temperature Recall 9 9 Degauss 10 PowerSaver Troubleshooting 11 12 Appendix 12 Specifi
Summary of the content on the page No. 4
Preface: Safety Information Please read and follow these instruc- Put your monitor in a location with tions when connecting and using your 7 low humidity and a minimum of computer monitor. dust. Avoid places like damp basements or dusty hallways. Before connecting the AC power Do not expose the monitor to rain 1 cord to an outlet, make sure the or use it near water (in kitchens, voltage designation on your moni- 8 next to swimming pools, etc.). If tor corresponds to the local elec- the monitor a
Summary of the content on the page No. 5
Chapter One: Overview of Your Monitor English Front Panel Function control buttons 1 Use these buttons to control the shape of the display area, and to control the color qualities of the display image. Brightness 2 Use this rotary control to adjust the overall bright- ness of the display image. Contrast 3 Use this rotary control to adjust the contrast level of the display image. Power indicator 4 This light glows green during normal operation, and glows amber when you are making adjustments. Pow
Summary of the content on the page No. 6
3 Rear Panel Power port 1 Connect the power cable here. Signal port 2 Connect your signal cable here. 4 Chapter One: Overview of Your Monitor
Summary of the content on the page No. 7
English Connecting Your Monitor Connect the signal cable (with the 5 adapter if necessary) to the video to a Computer port on the back of your computer. Turn off your computer and unplug This port might be directly 1 its power cord. attached to your computer, or it might be part of a video board, Connect the signal cable to the video card, or graphics card. 2 signal port on the back of your monitor. Connect the power cord for your 6 monitor to the power port on the If you are using a Macintosh c
Summary of the content on the page No. 8
Chapter Three: Adjusting Your Monitor Overview Your Samsung SyncMaster computer monitor allows you to easily adjust the characteristics of the image being dis- played. All of these adjustments are made using the con- trol buttons on the front of the monitor. While you use these buttons to adjust the controls, an on-screen menu shows you their numeric values as they change. Direct-Access Features The features described on this page can be accessed quickly, at the touch of one button. Contrast Thi
Summary of the content on the page No. 9
Chapter Three: Adjusting Your Monitor Control Function Features The features described in this section can all be accessed using your monitor’s control function buttons. While implementing control functions, the indicator’s color is orange. However, you cannot adjust the display image while a control function is disabled (the indicator’s color is green). Most features use only one button for access, however some features require that you push two buttons. Follow the instructions below to adjust
Summary of the content on the page No. 10
Chapter Three: Adjusting Your Monitor Size (H/V) Follow these instructions to change the size of the moni- tor’s entire display. Push this button once to adjust the horizontal and 1 vertical size of the entire display. Use the 4 and b buttons to change the horizontal 2 size (width) of the entire display; use the V and A buttons to change the vertical size (height). Geometric Distortion (G/D) First function: Pincushion / Trapezoid Adjust the pincushion setting when the sides of the display are bo
Summary of the content on the page No. 11
Chapter Three: Adjusting Your Monitor COLOR Color Temperature TEMP. Follow these steps to change the color temperature set- ting. Color Temperature is a measure of the “warmth” of the image colors. Push this button once to access the color tempera- 1 ture function. Use the V and A buttons to select between the 2 9300K color and the 6500K color. Recall Use this button to return the settings to their original fac- tory settings. Push and hold in the recall button for several sec- onds, or until th
Summary of the content on the page No. 12
Chapter Three: Adjusting Your Monitor PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The available modes are “On,” “Standby,” “Suspend,” and “Off.” This system operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature. See the table below for
Summary of the content on the page No. 13
Chapter Three: Adjusting Your Monitor Troubleshooting Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the back cover of this manual, or contact your dealer. There is no screen image. l Check to see that both the monitor and the computer are plugged in and turned on. “Check Signal Cable” appears l Check the signal cable connection betw
Summary of the content on the page No. 14
Appendix Specifications Picture Tube 43 cm (17") full square type [40 cm (15.7") viewable] Flat face 90° deflection 0.28 Dot pitch Silica coated with anti electrostatic Medium short persistence phosphor Synchronization Horizontal: 30 kHz to 69 kHz (automatic) Vertical: 50 Hz to 160 Hz (automatic) Display Color Unlimited colors Maximum Resolution Horizontal: 1280 dots Vertical: 1024 lines Active Display Horizontal: 306 ± 3 mm (12.05"+ 0.12") Vertical: 230 ± 3 mm (9.06"+ 0.12”) (Active display siz
Summary of the content on the page No. 15
Appendix Pin Assignments Sync Type 15 Pin Side of the Signal Cable (Figure 1) Cable Adapter (Figure 2 Pin No. Separate Composite Apple MAC II 1 Red Red GND-R 2 Green Green Red 3 Blue Blue H/V Sync 4 GND GND Sense 0 5 DDC Return DDC Return Green 6 GND-R GND-R GND-G 7 GND-G GND-G Sense 1 8 GND-B GND-B Reserved 9 Reserved Reserved Blue 10 GND-Sync/Self-Raster GND-Sync/Self-Raster Sense 2 11 GND GND GND 12 DDC Data DDC Data V-Sync 13 H-Sync H/V-Sync GND-B 14 V-Sync Not Used GND 15 DDC Clock DDC Cloc
Summary of the content on the page No. 16
Appendix FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: NOTE: This equipment has been tested and found to com- ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not i
Summary of the content on the page No. 17
Appendix User Information Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. If necessary, consult your dealer or an experienced radio/television technician for additional suggestions. You may find the booklet called How to Identify and Resolve Radio/TV Interference Problems helpful. This booklet was prepared by the Federal Communications Commission. It is available from the U.S. Government Printing Of
Summary of the content on the page No. 18
Appendix IC Compliance Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations of ICES-003. VCCI Information This equipment is in the 2nd Class category (information equipment to be used in a residential area or an adjacent area thereto) and conforms to the standards set by the Voluntary Control Council For Interference by Data Processing Equipment and Electronic Office Machines aimed at preventing radio interference in such residen
Summary of the content on the page No. 19
Index A S Adapter 5 Safety 2 Signal cable i i B Signal port 4 Brightness 3, 6 Size 8 C Specifications 12 Color temperature 9 Stand i i 5 Connecting your monitor to a computer T Contrast 3, 6 Tilt 8 D Trapzoid 8 Degauss 9 Troubleshooting 11 Display modes timing chart 1 3 U E User mode 7 16 European notice V F VCCI information 16 FCC information 14 W Front panel 3 Warranty card i i Function control buttons 3 G Geometric distortion 8 I IC compliance notice 16 Installation 5 M 5 Macintosh Manual i i
Summary of the content on the page No. 20
