Summary of the content on the page No. 1
FPC 8059
5.7” VGA TFT
Fan less Touch Panel PC
User’s Manual
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. Acnodes Corp assumes no responsibility for any infringements of patents or other rights of third parties, which may result from its use. Acnodes Corp assumes no responsibility for any inaccuracies that may be contained in this document. Acnodes Corp makes no commitment to update or to keep current the information contained in this manual. A
Summary of the content on the page No. 4
Safety Approvals CE Marking FCC Class A FCC Compliance This equipment has been tested and complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If not installed and used in accordance with proper instructions, this equipment might generate or radiate radio frequency
Summary of the content on the page No. 5
Safety Precautions Before getting started, read the following important cautions. 1. The FPC 8059 does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and place all electronic components in any static-shielded devices. M
Summary of the content on the page No. 6
5. Do not open the system’s back cover. If opening the cover for maintenance is a must, only a trained technician is allowed to do so. Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions: Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This will help to d
Summary of the content on the page No. 7
This page does not contain any information. 3
Summary of the content on the page No. 8
Table of Contents Disclaimers ........................................................................ii Safety Approvals................................................................iii FCC Compliance ..............................................................iii Safety Precautions ............................................................. iv C h a p t e r 1 .....................................................................1 Introduction ..............
Summary of the content on the page No. 9
Summary of the content on the page No. 10
Summary of the content on the page No. 11
FPC 8059 User’s Manual C h a p t e r 1 Introduction This chapter contains the general information and the detail specifications of the FPC 8059. Chapter 1 includes the following sections: General Description System Specification Dimensions I/O Outlets Package List 1.1 General Description The FPC 8059 is a 5.7” fan less TFT VGA touch panel computer. It is equipped with CISI-based low power consumption processor, AMD LX800. By supportin
Summary of the content on the page No. 12
FPC 8059 User’s Manual 1.2 Specifications 1.2.1 Main CPU board CPU: AMD LX800 500MHz System Chipset: AMD LX + CS5536AD BIOS: Phoenix-Award 4Mbit with RPL/PXE Ethernet Boot ROM, Smartview and customer CMOS backup. System Memory: One 184-pin DDR DIMM Maximum up to 1GB 1.2.2 I/O System Standard I/O: − 2 x serial ports (1 x RS-232, 1 x RS-232/422/485) − 2 x USB Ports 2.0 compliant Ethernet: Equipped with 1 x RJ-45 for 10/100 base-T Audio: Re
Summary of the content on the page No. 13
FPC 8059 User’s Manual 1.2.3 System Specification 5.7” VGA TFT LCD Disk drive housing: − 1 x Compact Flash T ype II Socket DC 24V power supply Heat dispensing design Net weight: − 2.0 Kgs Dimension (main body size): − 208.5 x 167.3 x 66.5 mm Operating temperature: − O° to 45°C ; Relative umidity:50% Relative humidity: − 10% to 85% @ 40° C, non-condensing Altitude: − 10,000 ft. (3,000 meters) Vibration (operating): − 5 to 500 Hz, 1 G random Shock
Summary of the content on the page No. 14
FPC 8059 User’s Manual Introduction 4
Summary of the content on the page No. 15
FPC 8059 User’s Manual 1.4 I/O Outlets The following figure shows the I/O locations of the FPC 8059. 1: Power Switch 6: LAN 2: DC power connector 7: USB 2.0 x 2 3: COM 2 (RS-232) 8: Line-out 4: COM 1 (RS-232/422/485) 9: CompactFlash card 5: PC/104 slot Introduction 5
Summary of the content on the page No. 16
FPC 8059 User’s Manual 1.5 Package list When you receive the FPC 8059, there are following items in the package. If you can not find it, please contact Acnodes Corp. distributors. 1. FPC 8059 x 1 2. Panel mount kit x 6 3. Driver CD x1 Introduction 6
Summary of the content on the page No. 17
Summary of the content on the page No. 18
FPC 8059 User’s Manual C h a p t e r 2 Hardware Installation The FPC 8059 provides rich I/O ports and flexible expansions for you to meet different demand such as PCMCIA, WLAN module and so on. The chapter will show you how to install the hardware. It includes : Compact Flash Card PC/104 Serial Port Ethernet Mounting Way 8 Hardware Installation
Summary of the content on the page No. 19
FPC 8059 User’s Manual 2.1 CompactFlash Card Installation FPC 8059 offers one CF slot for users to install Compact Flash card. Please refer to the following instructions and illustration: 1. Remove the rubber cover at left-side. 2. Install Compact Flash card in the FPC 8059. Hardware Installation 9
Summary of the content on the page No. 20
FPC 8059 User’s Manual 2.2 PC/104 Installation The FPC 8059 offers a convenient expansion for users to install PC/104 module such as PCMCIA, WLAN, COM port card and so on. Please follow the steps: 1. Unscrew screws to remove the bracket. 2. Install PC/104 module. 10 Hardware Installation
