Summary of the content on the page No. 1
3-867-659-42 (1)
Trinitron Color
Computer Display
GB
Operating Instructions
FR
Mode d’emploi
DE
Bedienungsanleitung
ES
Manual de instrucciones
IT
Istruzioni per l’uso
RU
Инструкция по эксплуатации
CPD-E100P
© 2000 Sony Corporation
Summary of the content on the page No. 2
Owner’s Record The model and serial numbers are located at the rear of the unit. Record these numbers in the spaces provided below. Refer to them whenever you call upon your dealer regarding this product. Model No. Serial No. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dangerously high voltages are present inside the unit. Do not open the cabinet. Refer servicing to qualified personnel only. EN 55022
Summary of the content on the page No. 3
Table of Contents Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Identifying parts and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Step 1: Connect your monitor to your computer . . . . . . . . . . . . . . . 6 Step 2: Connect the power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Step 3: Turn on the monitor and
Summary of the content on the page No. 4
Use of the tilt-swivel Precautions This monitor can be adjusted within the angles shown below. To find the center of the monitor’s turning radius, align the center of Warning on power connections the monitor’s screen with the centering dots on the stand. Use the supplied power cord. If you use a different power cord, Hold the monitor at the bottom with both hands when you turn it be sure that it is compatible with your local power supply. horizontally or vertically. Be careful not to pinch
Summary of the content on the page No. 5
Identifying parts and controls See the pages in parentheses for further details. Front Rear MENU RESET AC IN MENU RESET 1 RESET button (page 12) 4 AC IN connector (page 6) This button resets the adjustments to the factory settings. This connector provides AC power to the monitor. 2 Control button (page 9) 5 Video input connector (HD15) (page 6) The control button is used to display the menu and make This connector inputs RGB video signals (0.700 Vp-p, GB adjustments to the monitor, including b
Summary of the content on the page No. 6
x Connecting to a Macintosh or compatible computer Setup You will need a Macintosh adapter (not supplied). Before using your monitor, check that the following accessories are included in your carton: Power cord (1) AC IN Warranty card (1) Notes on cleaning the screen’s surface (1) This instruction manual (1) Step 1:Connect your monitor to your computer Turn off the monitor and computer before connecting. Note Do not touch the pins of the video cable connector as this might bend the
Summary of the content on the page No. 7
Step 3:Turn on the monitor and Selecting the on-screen menu computer language (LANGUAGE/ INFORMATION) First turn on the monitor, then turn on the computer. English, French, German, Italian, Spanish, Russian and Japanese versions of the on-screen menus are available. The default setting is English. 1 Press the center of the control button. The installation of your monitor is complete. See page 9 for more information on using the control button. If necessary, use the monitor’s controls to adjus
Summary of the content on the page No. 8
8 COLOR (page 11) COLOR USER 5000KKK 6500 9300 Select the COLOR menu to adjust Customizing Your Monitor R50 the picture’s color temperature. G50 B50 You can use this to match the You can make numerous adjustments to your monitor using the SELECT E I T monitor’s colors to a printed on-screen menu. picture’s colors. Navigating the menu 9 LANGUAGE/INFORMATION LANGUAGE / INFORMAT ION (page 7, 15) Press the center of the control button to display the main MENU ENGL I SH FRAN A I S Select the L
Summary of the content on the page No. 9
x Using the control button Adjusting the brightness and 1 Display the main MENU. contrast Press the center of the control button to display the main MENU on your screen. Brightness and contrast adjustments are made using a separate BRIGHTNESS/CONTRAST menu. MENU These settings are stored in memory for all input signals. 1 Move the control button in any direction. The BRIGHTNESS/CONTRAST menu appears on the screen. BR I GHTNESS / CONTRAST 2 Select the menu you want to adjust. Highlight the de
Summary of the content on the page No. 10
Adjusting the horizontal size or Adjusting the curvature of the centering of the picture (H-SIZE/ picture’s sides (PIN/PIN BALANCE) CENTER) These settings are stored in memory for the current input signal. These settings are stored in memory for the current input signal. 1 Press the center of the control button. The main MENU appears on the screen. 1 Press the center of the control button. The main MENU appears on the screen. 2 Move the control button m/M to highlight PIN/ PIN BALANCE and pres
Summary of the content on the page No. 11
Adjusting the picture’s rotation Adjusting the color of the picture (ROTATION) (COLOR) This setting is stored in memory for all input signals. The COLOR settings allow you to adjust the picture’s color temperature by changing the color level of the white color field. 1 Press the center of the control button. Colors appear reddish if the temperature is low, and bluish if the The main MENU appears on the screen. temperature is high. This adjustment is useful for matching the monitor’s colors
Summary of the content on the page No. 12
Additional settings (DEGAUSS/ Resetting the adjustments CANCEL MOIRE) This monitor has the following three reset methods. Use the RESET button to reset the adjustments. You can manually degauss (demagnetize) the monitor, and adjust the moire cancellation level. RESET 1 Press the center of the control button. The main MENU appears on the screen. 2 Move the control button m/M to highlight DEGAUSS/CANCEL MOIRE and press the center of Resetting a single adjustment item the control button again.
Summary of the content on the page No. 13
Technical Features Troubleshooting Before contacting technical support, refer to this section. Preset and user modes If thin line appears on your screen When the monitor receives an input signal, it automatically matches the signal to one of the factory preset modes stored in the (damper wire) monitor’s memory to provide a high quality picture at the center of the screen. (See Appendix for a list of the factory preset modes.) The visible line on your screen especially when the background F
Summary of the content on the page No. 14
Trouble symptoms and remedies If the problem is caused by the connected computer or other equipment, please refer to the connected equipment’s instruction manual. Use the self-diagnosis function (page 16) if the following recommendations do not resolve the problem. Symptom Check these items No picture If the 1 (power) indicator is not lit Check that the power cord is properly connected. Check that the 1 (power) switch is in the “on” position. If the NO INPUT SIGNAL message Check that the v
Summary of the content on the page No. 15
Symptom Check these items Picture is ghosting Eliminate the use of video cable extensions and/or video switch boxes. Check that all plugs are firmly seated in their sockets. Picture is not centered or sized Adjust the size or centering (page 10). Note that some video modes do not fill the screen properly to the edges. Edges of the image are curved Select PIN/PIN BALANCE, KEY/KEYBALANCE, or ROTATION, and adjust the picture’s shape and rotation (page 10, 11). Wavy or elliptical pattern (
Summary of the content on the page No. 16
Self-diagnosis function Specifications This monitor is equipped with a self-diagnosis function. If there is CRT 0.24 mm aperture grille pitch (center) a problem with your monitor or computer, the screen will go 15 inches measured diagonally blank and the 1 (power) indicator will either light up green or 90-degree deflection flash orange. If the 1 (power) indicator is lit in orange, the Viewable image size Approx. 285 × 214 mm (w/h) computer is in power saving mode. Try pressing any key on
Summary of the content on the page No. 17
Table des Matières Précautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Identification des composants et des commandes . . . . . . . . . . . . . . 5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Étape 1: Raccordez le moniteur à votre ordinateur . . . . . . . . . . . . . 6 Étape 2: Branchez le cordon d’alimentation. . . . . . . . . . . . . . . . . . . 6 Étape 3: Mettez le moniteur et l’ordinateur sous tensi
Summary of the content on the page No. 18
Entretien Précautions Nettoyez l’écran à l’aide d’un chiffon doux. Si vous utilisez un produit nettoyant pour vitres, n’utilisez aucun type de produit Avertissement sur le raccordement à la source contenant une solution antistatique ou des additifs similaires. d’alimentation Vous risquez de rayer le revêtement de l’écran. Utilisez le cordon d’alimentation fourni. Si vous utilisez un Ne frottez pas, ne touchez pas et ne tapotez pas la surface de cordon d’alimentation différent, assurez
Summary of the content on the page No. 19
Identification des composants et des commandes Pour plus de détails, reportez-vous au pages indiquées entre parenthèses. Avant Arrière MENU RESET AC IN MENU RESET 1 Touche RESET (réinitialisation) (page 12) 4 Connecteur AC IN (page 6) Cette touche réinitialise les réglages aux valeurs par défaut. Ce connecteur assure l’alimentation du moniteur. 2 Manette de commande (page 9) 5 Connecteur d’entrée vidéo (HD15) (page 6) La manette de commande sert à afficher le menu et à ajuster Ce connecteur a
Summary of the content on the page No. 20
x Raccordement à un ordinateur Macintosh ou compatible Installation Vous avez besoin d’un adaptateur Macintosh (non fourni). Avant de mettre ce moniteur en service, vérifiez si tous les accessoires suivants se trouvent bien dans le carton: Cordon d’alimentation (1) AC IN Carte de garantie (1) Remarques sur l’entretien de la surface de l’écran (1) Ce mode d’emploi (1) Étape 1: Raccordez le moniteur à votre ordinateur Mettez le moniteur et l’ordinateur hors tension avant de procéder
