Sony GDM-20D10-15 user manual

Summary of the content on the page No. 1

Installation Manual For



Sun/Sony GDM-20D10-15


Color Monitor Series
Please read Entirely Before Installation!

















This document contains instructions to connect a Sun Microsystems/Sony GDM-20D10 color

monitor to a PC system, using the accompanying cable and video card. Please read the

documentation provided with the video card, for more instructions.

The above

Summary of the content on the page No. 2

ADJUSTING THE SCREEN : This unit adjustments are done using a credit card size remote. The Remote must be pointed directly to the front right side of the monitor at about 1-2 inches apart from the monitor. V.SIZE or Vertical size adjustment control: This is your vertical height adjustment. You need to center the screen vertically first to get this correct. V.CENT or Vertical center adjustment control: This control will move the screen up or down (vertical center). In so

Summary of the content on the page No. 3

Monitor SPECIFICATION: Vertical refresh rate : 60-120 Hz Horizontal Scan rate: 60- 81 KHz (Kilo Hetrz). Horizontal and Vertical sync polarity : recommended Negative polarity (-,-) Horizontal scan rate is automatic for the above range. Maximum Resolution: 1600x1200 Monitor Adjusted for: 1024x768 Tube: Sony Trinitron This monitor does not function with a notebook running at 31.5 Khz( VGA standard). Running the monitor on regular video cards: This monitor runs fine

Summary of the content on the page No. 4

To change the modes, polarity and make other adjustments we recommend powerstrip software: http://www.entechtaiwan.com Monitor selection under windows 9x: Under Monitor selections, choose Sony Corp G500 Multiscan to give you all high refresh choices. If you are using a MIRAGE video card, choose standard monitor type, SuperVGA 1600x1200. MIRAGE Video Cards: To get video cards which run all the modes (including Cmos setup, DOS, VGA, Games,....and high resolutions) on thi