Summary of the content on the page No. 1
1. Please read the users guide before proceeding with your
installations. Serious damage may occur if the
procedure is not followed properly.
2. This motherboard does not support CPUs with a Vcore
higher than 1.6 volts. Please make sure the CPU you are
using 1.6 volts or is below. Check the CPU specification
before you insert it in the CPU socket.
3. AGP cards running at 3.3v are not supported. Only AGP
cards running at 1.5v (most 4x or 8x AGP cards) are
supported on this motherboa
Summary of the content on the page No. 2
SY-P4I875P DRAGON 2 V1.0 Motherboard **************************************************** mPGA Socket 478 Processor supported Intel 875P AGP/PCI 533/800 MHz Front Side Bus supported ATX Form Factor **************************************************** User's Manual
Summary of the content on the page No. 3
SOYO™ SY-P4I875P DRAGON 2 V1.0 Copyright © 2004 by SOYO Group Inc. Trademarks: SOYO is the registered trademark of SOYO Group Inc. All trademarks are the properties of their owners. Product Rights: All names of the product and corporate mentioned in this publication are used for identification purposes only. The registered trademarks and copyrights belong to their respective companies. Copyright Notice: All rights reserved. This manual has been copyrighted by SOYO Group Inc. No part
Summary of the content on the page No. 4
Table of Contents SY-P4I875P DRAGON 2 V1.0 Table of Contents CHAPTER 1 MOTHERBOARD DESCRIPTION.....................................1 1-1 INTRODUCTION...........................................................................1 1-2 UNPACKING THE MOTHERBOARD...........................................1 1-3 KEY FEATURES.............................................................................3 1-4 HANDLING THE MOTHERBOARD.............................................5 1-5 ELECTROSTATIC DISCH
Summary of the content on the page No. 5
Table of Contents SY-P4I875P DRAGON 2 V1.0 3-9 LOAD FAIL-SAFE DEFAULTS ...................................................84 3-10 LOAD OPTIMIZED DEFAULTS.................................................85 3-11 SUPERVISOR PASSWORD.........................................................86 3-12 USER PASSWORD.......................................................................87 CHAPTER 4 DRIVERS INSTALLATION ..............................................89 CHAPTER 5 USB 2.0 DRIVER INSTALLA
Summary of the content on the page No. 6
Motherboard Description SY-P4I875P DRAGON 2 V1.0 Chapter 1 MOTHERBOARD DESCRIPTION 1-1 INTRODUCTION The SY-P4I875P DRAGON 2 V1.0 AGP/PCI Motherboard is a high-performance Socket 478 processor, ATX form-factor system board. SY-P4I875P DRAGON 2 V1.0 uses the Intel 875P Chipset technology. This Motherboard is fully compatible with industry standards and adds many technical enhancements. 1-2 UNPACKING THE MOTHERBOARD When unpacking the Motherboard, check for the following items: The S
Summary of the content on the page No. 7
Motherboard Description SY-P4I875P DRAGON 2 V1.0 One SPDIF Audio Connector Card (optional) One Back panel ΣBOX (optional) Warning: Do not unpack the Motherboard from its anti-static packaging until you are ready to install it. Like most electronic equipment, your Motherboard may be damaged by electrostatic discharge. To avoid permanent damage to components ground yourself while working by using a grounding strap. Otherwise, ground yourself frequently by touching the unpai
Summary of the content on the page No. 8
Motherboard Description SY-P4I875P DRAGON 2 V1.0 1-3 KEY FEATURES CPU Supports Intel® mPGA Socket 478 processors: Pentium® 4 with and without Hyperthreading, Northwood, Prescott (533/800MHz FSB) Pentium® 4 Celeron SOYO COMBO Setup CMOS setup menu for complete and easy changing of your CPU settings in CMOS setup, making jumpers obsolete. Note: CPU with higher than 1.6 volts are not supported. Chipset Intel® 875P / ICH5R Chipset Memory The SY-P4I875P DRAGON 2 V1.0 supports PC270
Summary of the content on the page No. 9
Motherboard Description SY-P4I875P DRAGON 2 V1.0 Storage ICH5R integrated Serial ATA controller supporting up to 2x UDMA 150 hard disks in normal or RAID 0 mode ALi M5281 Serial ATA RAID controller supporting up to 2x UDMA 150 hard disks in normal or RAID (0 or 1) mode. ICH5R Integrated Parallel ATA controller supporting up to 4x UDMA 33/66/100 Parallel ATA devices. ALi M5281 PCI to IDE RAID controller for support for up to 4x UDMA 33/66/100/133 parallel ATA hard disks in norma
Summary of the content on the page No. 10
Motherboard Description SY-P4I875P DRAGON 2 V1.0 1-4 HANDLING THE MOTHERBOARD To avoid damage to your Motherboard, follow these simple rules while unpacking: Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis. Remove the Motherboard from its anti-static packaging. Hold the Motherboard by the edges and avoid touching its components. Check the Motherboard for damage. If any chip appears loose, contact your dealer or our tech
Summary of the content on the page No. 11
Motherboard Description SY-P4I875P DRAGON 2 V1.0 1-6 SY-P4I875P DRAGON 2 V1.0 MOTHERBOARD LAYOUT PS/2 KB PS/2 Mouse Connector Connector DDR_B1 DDR_B2 DDR_A1 DDR_A2 I/O CHIP 1394USB SMCARD 5 14 13 SIRCON 1 2 COM A ATX Power COM B PRT LAN Connector +12V Power FDC1 USBLAN MIC IN 7 1 Audio out 8 2 Audio in J30 AGPDET LAN CHIP 3V PCI Slot #1 Lithium Battery SATA2 PCI Slot #2 AUDIO JP5 IDE 1 IDE 2 CHIP CM OS Cl ear Jum per PCI Slot #3 SATA1 JP30 1 2 AUXIN 1 ALi CDIN 5 PCI Slot #4 CHIP 411 1394 CHIP
Summary of the content on the page No. 12
Motherboard Description SY-P4I875P DRAGON 2 V1.0 1-7 SY-P4I875P DRAGON 2 V1.0 MOTHERBOARD COMPONENTS AB C D E FG H I J K L AL M N O AK AJ P AI AH Q AG AF AE R AD S T AC AB AA Z Y X W V U 7
Summary of the content on the page No. 13
Motherboard Description SY-P4I875P DRAGON 2 V1.0 A Microphone and LAN Status LED Connector (J30) This connector allows you to extend your microphone connector and LAN Status LED to your front panel. Check the MIC & LED Connector (J30) paragraph on page 36 for a lay-out of this header. B +12V Power Connector This is where the Power Supply's +12V ATX connector goes. For a lay-out of this connector please check the F. ATX12V Power Supply paragraph on page 39. C AGP Slot This is the AG
Summary of the content on the page No. 14
Motherboard Description SY-P4I875P DRAGON 2 V1.0 H Chassis Cooling Fan (CHAFAN3) connectors This connector is to connect your chassis fan to your motherboard. This motherboard supports up to 3 chassis fans. Please check the (2) Chassis Cooling Fan (CHAFAN1, CHAFAN2, CHAFAN3) paragraph on page 34 for more details. I DDR DIMM Banks These 4, 184 pin memory slots are to install your system memory in. They support up to 4 GB of memory. For more details check the Step 2 Install Memory Modul
Summary of the content on the page No. 15
Motherboard Description SY-P4I875P DRAGON 2 V1.0 O Chassis Cooling Fan (CHFAN2) connector This connector is to connect your third chassis fan to your motherboard. This motherboard supports up to 3 chassis fans. Please check the (2) Chassis Cooling Fan (CHAFAN1, CHAFAN2, CHAFAN3) paragraph on page 34 for more details. P Flash BIOS This chip contains the system BIOS firmware, and is software upgradable. It's size is 4Mbit. For updates of your Flash BIOS, please go to http://www.soyogrou
Summary of the content on the page No. 16
Motherboard Description SY-P4I875P DRAGON 2 V1.0 V ALi M5281 Serial /Parallel ATA RAID chip The M5281 provides personal computer systems with PCI device solution of the highest integration: It includes two Serial-ATA Host controllers for supporting a total of 2 ports, one fully Parallel-ATA Host controller for supporting two channels. W SATA Connectors These connectors allow you to attach one UDMA 150 hard disk to each connector. Note that SATA 3 and 4 are controlled by the ALi M5281
Summary of the content on the page No. 17
Motherboard Description SY-P4I875P DRAGON 2 V1.0 AC IEEE1394 Firewire connector These connectors allow you to attach IEEE 1394 connectors or devices to the motherboard. The lay-out can be found in the 8. IEEE 1394 (Firewire) Connector (FW1/FW2) paragraph on page 38. AD VIA VT6306 IEEE1394 Firewire chip The VT6306 IEEE 1394 OHCI Host Controller provides high performance serial connectivity. It implements the Link and Phy layers for IEEE 1394-1995 High Performance Serial Bus and 1394a D
Summary of the content on the page No. 18
Motherboard Description SY-P4I875P DRAGON 2 V1.0 AJ Intel 82547EI LAN chip The Intel® 82547 family of controllers are highly integrated Platform LAN Connect devices combining 10BASE-T, 100BASE-TX and 1000BASE-T (Gigabit) physical layer capabilities, and providing a core ingredient of the enabling solution for the integrated networking connectivity in Intel® I/O Controller Hub based platforms. It supports a single interface fully compliant with the IEEE 802.3/802.3u/802.3 standard. The
Summary of the content on the page No. 19
Hardware Installation SY-P4I875P DRAGON 2 V1.0 Chapter 2 HARDWARE INSTALLATION Congratulations on your purchase of SY-P4I875P DRAGON 2 V1.0 Motherboard. You are about to install and connect your new Motherboard. Note: Do not unpack the Motherboard from its protective anti-static packaging until you have made the following preparations. 2-1 PREPARATIONS Gather and prepare all the following hardware equipment to complete the installation successfully: 1. Socket mPGA478 processor with
Summary of the content on the page No. 20
Hardware Installation SY-P4I875P DRAGON 2 V1.0 2-2 INSTALLATION GUIDE We will now begin the installation of the Motherboard. Please follow the step-by-step procedure designed to lead you to a complete and correct installation. Step1- Install the Central Processing Unit (CPU). Step2- Install memory modules. Step3- Install expansion cards. Step4- Connect cables, case wires, and power supply. Step5- Power on and enter BIOS setup. Step6- Install supporting software tools. See Chapter
