Summary of the content on the page No. 1
Issue June 01, 2008
®
®
Product SPARC Enterprise M5000
SPARC Enterprise M5000
Server
Pages 38
®
SPARC Enterprise M5000 Configuration Diagram
New products: M5000-GR20, M5000-CL09-PI01, M5000-CL10-PI01, M5000-CL11-12-PI01
Withdrawn products:
Some minor corrections: Chapter “Mounting additional Memory with different sizes”
SystemArchitect PRIMEPOWER (PW) Hotline
For further questions related to configurations for SE M5000 Systems with PC-ARCHITECT or SYSTEM-
Summary of the content on the page No. 2
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 2 / 38 Contents Recommended 19"- rack PRIMECENTER 2 with 1100 mm depth 3 Overview M4000 and M5000 4 System Architecture 5 ® Product Overview SPARC Enterprise M5000 6 Features 6 M5000 Server Product ID List 9 M5000 COD (Capacity on Demand) Server Product ID List 10 M5000 COD (Capacity on Demand) CPU Right to Use (License) Product ID List 10 M5000 Internal Storage Device Product ID List 10 M5000 Filter Prod
Summary of the content on the page No. 3
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 3 / 38 Recommended 19"- rack PRIMECENTER 2 with 1100 mm depth 24 HU height 38 HU height 46 HU height + 2 x 2 HU vertical + 3 x 2 HU vertical + 4 x 2 HU vertical S26361-K826-V212 S26361-K826-V213 S26361-K826-V214 ® SPARC Enterprise M5000 servers can be mounted in PCR2 Rack versions with 1100 mm depth. If the mounting kits do NOT fit to the required rack, please order additional kits separately. For more
Summary of the content on the page No. 4
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 4 / 38 Overview M4000 and M5000 ® ® SPARC Enterprise M4000 SPARC Enterprise M5000 Enclosure Rack 6U Rack 10U ® ® CPU / Processor Chips (multi-core, 4 x 2.15GHz SPARC 64VI 8 x 2.15GHz SPARC 64VI multi-thread (VMT)) (2 per module) (2 per module) Cores / Threads per System 8 / 16 16 / 32 Cores / Threads per processor Chip 2 / 2 Primary Cache per core Instruction 128 KB / Data 128 KB SLC (Second Level Cach
Summary of the content on the page No. 5
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 5 / 38 System Architecture PRIMECENTER 2 Rack PC LAN 24U, 38U, 46U deep 1100mm Console SPARC Enterprise M5000 10U Basic Config up to 8x CPU (up to 16 core) / 256 GB MEM / 4x Hard disk / Solaris 2x PCI-X and 8x PCI-express slot PC Up to 8 CPU, 4 Module (SPARC64 VI). Up to 16 core (2 Threads per core) 2.15GHz / 5MB SLC for 1 CPU (2 cores) CPU order# Type Serrial LAN HUB SEL[XY]1A1U 2 CPU, 2.15GHz on
Summary of the content on the page No. 6
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 6 / 38 ® Product Overview SPARC Enterprise M5000 ® SPARC ENTERPRISE M5000 is a midrange server developed using the expertise of Fujitsu and Sun Microsystems. It has been designed to be the best choice in mission-critical computing solutions. High scalability comes from eight CPU chips (16 cores) and is backed by exceptional reliability and excellent means for asset investment protection. Based on SMP (Symmetric
Summary of the content on the page No. 7
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 7 / 38 4. Very flexible partitioning functions are provided. • Multiple independent systems can be built on a single server called partitions or domains. • Each partition can individually be configured. • Up to four partitions are supported. • The motherboard on which CPU- and memory-modules are mounted is sub-divided into eight parts, and the two I/O board are sub-divided into four. A combination of sub-part
Summary of the content on the page No. 8
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 8 / 38 9. Configuration Diagram of the Main Unit * Areas indicated in blue show components belonging to the base units; those indicated in red show options (purchased separately, but see also base unit description). 10. Hardware for M5000 • Motherboard The motherboard carries CPU modules and memory modules. Four CPU modules (eight CPU chips) and eight memory modules (64 DIMMs) can be mounted. The mot
Summary of the content on the page No. 9
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 9 / 38 M5000 Server Product ID List PART NUMBER LONG DESCRIPTION SHORT DESCRIPTION M5000 family: ® SEFPAAA1S Fujitsu-Siemens Computers SPARC Enterprise M5000 server. SE M5000 2.1GHz Includes M5000 system, 2x 2.1GHz CPUs (1 2x 2.1GHz CPU Modules), 2P16GB 2x73GB 16GB system memory (2 ea. 8GB memory boards), 2x 73GB HDD, 4 PSU, 1 I/O tray ® SEFPBAA1S Fujitsu-Siemens Computers SPARC Enterprise M5000 se
Summary of the content on the page No. 10
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 10 / 38 M5000 COD (Capacity on Demand) Server Product ID List PART NUMBER LONG DESCRIPTION SHORT DESCRIPTION M5000family: SEFRCDB1S FSC SPARC Enterprise M5000 COD (Capacity On Demand) server. M5CoD 2.1GHz Includes 8x 2.15GHz CPUs (4 CPU boards with 2 x CPUs each, 5MB on- 8P64GB 4x73GB chip L2 cache) and 64GB system memory (4 memory modules with 8 x 2xI/O tray 2GB DDR2 DIMMs), 4 x 73GB SAS hard disks, 1
Summary of the content on the page No. 11
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 11 / 38 M5000 Power Cords for Rack internal use Product ID List Attention: For each PSU a Power Cord must be ordered for Rack internal connection (thickly marked in table below) to the Socket strip! Note: M5000 requires 4x 16A power cords, each I/O-Box requires 2x 10A power cords. Power Cord, Is a Standard Part of each to a Rack internal Socket strip, 16 A System PSU. For System Base Units! Socket st
Summary of the content on the page No. 12
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 12 / 38 Power supply unit and power supply connections ® SPARC ENTERPRISE M5000 has 2+2 redundant power supply units (four in total). Connect the power supply units as follows. Single Power Feed Dual Power Feed HDD#1 HDD#3 DAT DAT HDD#0 HDD#2 Power Power Power Power supply supply supply supply unit #1 unit #0 unit #2 unit #3 If an uninterruptible Power Supply (UPS) is used it shall only supply one of t
Summary of the content on the page No. 13
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 13 / 38 M5000 PCI Card Product ID List Ethernet Controller Overview Order PCI for Factory Description Max Max in Supported Numbers options: Bus Integration within a an in I/O-Box type or X-option System I/O-boat X7281A-2 X-option Yes PCI-e Dual Port Gb Ethernet MMF 8 2 Fact.- 7281A-2 Yes Integrat. X7280A-2 X-option Yes PCI-e Dual Port Gb Ethernet UTP 8 2 Fact.- 7280A-2 Yes Integrat. X4447A-Z
Summary of the content on the page No. 14
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 14 / 38 Fibre Channel Host Bus Adapters Overview Order PCI for Factory Description Max Max in Supported Numbers options: Bus Integration within a an in I/O-Box type: or X-option System I/O-boat SG-XPCIE2FC-QF4 X-option Yes Dual 4Gb Fiber Channel Network PCI-e 8 6 Adapter, RoHS 6 compliant Fact.- SG-PCIE2FC-QF4 Yes Integrat. SG-XPCIE2FC-EM4 X-option Yes Dual 4Gb Fiber Channel Network PCI-e 8 6 Adapte
Summary of the content on the page No. 15
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 15 / 38 Console Connection For APL a personal computer (PC) or workstation is required for system control and maintenance work. This console must be setup prior to installation of APL. The XSCF is accessed using this console. The console ports of each partition are accessed via XSCF. XSCF and the console need to be connected via LAN. If you forget the XSCF-sign on password, you will need to connect to XSCF via
Summary of the content on the page No. 16
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 16 / 38 Console connection example (Field engineer connects temporarily a PC via LAN (shown as blue line) or RS-232C (shown as dotted line) as required to provide maintenance) Note: For the HUB in the picture our LAN Switch D:GP70F-AL21 can be ordered. Console connection example (the console path is duplicated. Field engineer connects temporarily a PC via LAN (shown as blue line) or RS-232C (shown as dotted
Summary of the content on the page No. 17
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 17 / 38 Specifications for the PC (or the workstation, etc.) Description Remarks CPU Pentium3 1 GHz or greater Equivalent CPUs i.e. ® SPARC AMD are suitable. Memory 512 MB or greater OS Windows XP One of the OS listed Windows2000 on the left is required. RedHat Linux Solaris I/O CD-ROM/DVD-ROM (either internal or external device is available) LAN (1000Base-T, 100Base-TX, or 10Base-T) RS-232C (not nec
Summary of the content on the page No. 18
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 18 / 38 Partitioning ® SPARC ENTERPRISE M5000 supports partitioning in which a single server can be divided into multiple independent systems. • Partitioning creates multiple independent systems which are called partitions or domains. • The basic hardware resource required for partitioning is a Physical System Board (hereafter referred to as PSB). A PSB consists of a motherboard with or without connection to an
Summary of the content on the page No. 19
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 19 / 38 If only one partition is configured with both PSBs in Uni-XSB mode but no CPU- and MEM-modules are mounted on PSB#1, then HDDs and PCI slots on the additional I/O board cannot be used (Areas shaded black in the figure below are not equipped with CPU- and MEM-modules).
Summary of the content on the page No. 20
® Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC Enterprise M5000 Page 20 / 38 2) Quad XSB Because Quad-XSB allows to configure several partitions in units of individual CPU chips (two cores) it is the optimized way to create small partitions. Quad-XSB is equivalent to the XSB definition for PRIMEPOWER. Division Type: Quad-XSB PSB (consists of 1/2 motherboard and an I/O board) is divided into four partitions with 1 CPU chip and a set of memory (8 DIMMs) each. PSBs can be d
