Asus Gigabit Ethernet Switch GXD1051 user manual

Summary of the content on the page No. 1

QE4028
GX-D1051
GX-D1081
10/100/1000Mbps Gigabit Ethernet Switch
Quick Start Guide
Copyright © 2008 ASUSTeK COMPUTER INC. All Rights Reserved.
English

Summary of the content on the page No. 2

English Introduction Thank you for purchasing the ASUS GX-D1051 / GX-D1081 Gigabit Ethernet Switch! The GX-D1051 / GX-D1081 feature dedicated 10/100/1000Mbps connection, auto-negotiation and auto-MDI/MDIX capabilities, and store-and-forward switching architecture. Features • 5 x 10/100/1000Mbps Gigabit Ethernet ports for GX-D1051 • 8 x 10/100/1000Mbps Gigabit Ethernet ports for GX-D1081 • Auto-MDI/MDIX and auto-negotiation on all ports • Full or half duplex mode at 10/100Mbps transmit speed •

Summary of the content on the page No. 3

Technical specifications Data transmission rates 10/100/1000Mbps Ports 5 RJ-45 10/100/1000Mbps Gigabit Ethernet ports for GX-D1051 8 RJ-45 10/100/1000Mbps Gigabit Ethernet ports for GX-D1081 Protocol IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T IEEE 802.3x Full duplex flow control Jumbo frame support: 12KB for GX-D1051, 16KB for GX-D1081 Performance Bandwidth: 10Gbps for GX-D1051, 16Gbps for GX-D1081 Forward rate: 14,800 packets/sec. (10Mbps), 148,000 pa

Summary of the content on the page No. 4

English Hardware Front panel The front panel of GX-D1051 / GX-D1081 includes LED indicators that show realtime status of the switch. GX-D1051 front panel GX-D1081 front panel LED indicators LED Color Status Description Green ON The switch is ON. POWER OFF The switch is OFF. The corresponding port is connected and a ON valid link is established at 1000Mbps. Green A valid link is established and data is being Blinking transmitted or received at 1000Mbps. OFF No valid link is established. Link

Summary of the content on the page No. 5

Rear panel The rear panel of GX-D1051 / GX-D1081 includes Gigabit Ethernet ports and the DC IN input port. 5 4 3 2 VIP DC 12V GX-D1051 rear panel 8 7 6 5 4 3 2 VIP DC 12V GX-D1081 rear panel Quick Start Guide 5 English

Summary of the content on the page No. 6

English Placement options • DO NOT place any device on top of the switch. • Leave enough space around the switch for adequate ventilation. Ensure that the switch is placed in a location that meets the environmental specifications. See page 3 for details. Desktop placement Put the switch on a flat and stable surface. Wall mounting Mount the switch on a wall with the supplied mounting screws. To mount the switch on a wall: 1. Secure the two supplied screws into the wall. 2. Latch the hooks of t

Summary of the content on the page No. 7

Connecting to network devices • Use either cross-over or straight-through cables to connect other network devices such as PCs, bridges, switches, hubs, and repeaters. • The length of the network cables should not exceed 100 meters (328 feet). Connecting to end nodes The GX-D1051 / GX-D1081 Switch is used as a standalone switch to connect end nodes such as PCs and printers and form a small workgroup. With auto MDI/MDIX capability, each Ethernet port on this switch automatically detects the t

Summary of the content on the page No. 8

English 8 Quick Start Guide