Summary of the content on the page No. 1
NWD-370N
Draft 802.11n Wireless PCI Adapter
Quick Start Guide
Version 1.00
Edition 1
10/2006
Table of Contents
ENGLISH 1
DEUTSCH 15
ESPAÑOL 29
FRANÇAIS 43
ITALIANO 57
РУССК ИЙ 71
SVENSKA 85
繁體中文 99
Summary of the content on the page No. 2
EN ENGLIS GLISH H Overview The NWD-370N is a wireless network adapter for your desktop computer. See page 12 for a list of system requirements. 1 Install the Software Install the software from the CD before you insert the NWD-370N. Do not insert the NWD- 370N yet. If you have already installed Funk Odyssey Client software on the computer, uninstall (remove) it. 1 Remove the NWD-370N if you already inserted it. 2 Insert the included CD into the CD-ROM drive on your computer. 1
Summary of the content on the page No. 3
ENGLISH 3 When the following screen displays, click Setup to install the ZyXEL utility and driver. If the screen does not display, locate and double-click autorun.exe on the CD. 2
Summary of the content on the page No. 4
ENGLISH 4 When the following screen displays, click Next. 5 Select Driver and Utility to install both the ZyXEL utility and the driver on your computer. If you want to install the driver only and use Wireless Zero Configuration (WZC) with Windows XP, select Driver only (see Note for 3
Summary of the content on the page No. 5
ENGLISH Windows XP Users). Click Next to accept the default file location or click Browse to select an alternate folder. 6 Click Install. 4
Summary of the content on the page No. 6
ENGLISH You will need to restart your computer after installing the ZyXEL utility. Make sure you have saved your work before continuing. 7 When the following screen displays, select No, I will restart my computer later. You will turn your computer off in order to install the hardware. Click Finish to complete the software installation. 5
Summary of the content on the page No. 7
ENGLISH 2 Install the Hardware Do not install the hardware until you have installed the software from the CD. 1 Save your work and close all applications. 2 Turn off the computer and any peripheral device(s), such as a printer. 3 Unplug the computer from the power source. 4 Ground yourself by wearing an anti-static wrist strap if you have one or touching a grounded metal object. Remove the computer cover, and then remove the NWD-370N from its packaging. 5 If the antennas are attached to th
Summary of the content on the page No. 8
ENGLISH 6 Insert the NWD-370N into an available PCI slot. Make sure the NWD-370N's contacts are fully seated in the PCI slot. 7 Secure the NWD-370N to the computer with a bracket screw. 8 Attach (screw) the antennas onto the NWD-370N. 9 Point the antennas up. 10 Replace the computer cover. 11 Turn on your computer. 7
Summary of the content on the page No. 9
ENGLISH The NWD-370N’s LEDs (lights) turn on if it is properly inserted. If the NWD-370N’s LEDs are not on after you have installed the software and the NWD-370N, make sure the NWD-370N is properly inserted. 3 Connect to a Wireless Network After you install the ZyXEL utility and insert the NWD-370N, an icon appears in the system tray. 8
Summary of the content on the page No. 10
ENGLISH If the icon does not display, uninstall and re- install the ZyXEL utility. See the User’s Guide for how to uninstall the utility. The NWD-370N automatically searches for any available network(s) and connects to a wireless network without security enabled. However, this wireless network may not be connected to the Internet. If the icon color is red, you are not connected to a wireless network. If the icon color is green you are already connected to a wireless network. Use the
Summary of the content on the page No. 11
ENGLISH 1 Double-click the icon. The ZyXEL utility Link Info screen displays. Click the Site Survey tab. 2 The available wireless network(s) displays in the Available Network List. SSID means Service Set Identity and is the name of the wireless network. 10
Summary of the content on the page No. 12
ENGLISH 3 If a wireless network has no security, one of the following icons appears next to its entry in the list. If a wireless network has security, one of the following icons appears next to its entry in the list. Choose the network you want to connect to and double-click its entry in the list. 4 If a network has no security, the Link Info screen displays. Go to step 6. 5 If a network has security, the security settings screen appears. You need to enter security information to connect
Summary of the content on the page No. 13
ENGLISH 3.1 Note for Windows XP Users If you want to use WZC, either disable the ZyXEL utility (if you already installed it) or just install the driver. • To disable the ZyXEL utility, right-click the icon and select Use Windows Zero Configuration. To activate the ZyXEL utility again, double-click the icon and click OK. To install the driver only, select Driver only. System Requirements Before installation, make sure you have a computer with the following: • Pentium II 300 MHz or above
Summary of the content on the page No. 14
ENGLISH Important Information Federal Communications Commission (FCC) Interference Statement The 802.11g Wireless LAN Adapter has been tested to the FCC exposure requirements (Specific Absorption Rate). The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d) (2). This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Refer to the User's Guide for general FCC
Summary of the content on the page No. 15
ENGLISH 14
Summary of the content on the page No. 16
DEUTSCH DEUTSCH Übersicht Der NWD-370N ist ein Drahtlosnetzwerkadapter für Ihren Desktopcomputer. Eine Aufstellung der Systemvoraussetzungen finden Sie auf Seite 27. 1 Installation der Software Installieren Sie die Software von der CD, bevor Sie die NWD-370N einstecken. Die NWD-370N jetzt noch nicht einlegen. Wenn auf Ihrem Computer das Programm Funk Odyssey Client installiert ist, muss dieses zunächst deinstalliert (entfernt) werden. 1 Entfernen Sie die NWD-370N, falls Sie sie bereits
Summary of the content on the page No. 17
DEUTSCH 3 Klicken Sie im folgenden Bildschirm auf Setup, um das ZyXEL-Utility und den Treiber zu installieren. Falls dieses Fenster nicht erscheinen sollte, navigieren Sie auf der CD zur Datei autorun.exe und klicken Sie doppelt darauf. 16
Summary of the content on the page No. 18
DEUTSCH 4 Wenn das folgende Fenster erscheint, klicken Sie auf Next (Weiter). 5 Wählen Sie Driver (Treiber) und Utility (Utility), um das ZyXEL-Utilityprogramm und den Treiber auf dem Computer zu installieren. Wenn Sie nur den Treiber installieren und die Wireless Zero Configuration (WZC) mit Windows XP verwenden möchten, wählen Sie nur Driver (Treiber) (siehe Hinweis für Windows XP-Benutzer). Klicken Sie auf Next (Weiter), um den vorgegebenen Standardordner als Speicherort für die Datei
Summary of the content on the page No. 19
DEUTSCH verwenden, oder klicken Sie auf Browse (Durchsuchen), um einen anderen Ordner auszuwählen. 6 Klicken Sie auf Install (Installieren). 18
Summary of the content on the page No. 20
DEUTSCH Wenn Sie das ZyXEL-Utilityprogramm installiert haben, muss der Computer neu gestartet werden. Denken Sie daran, vorher Ihre Arbeiten zu speichern. 7 Wenn das folgende Fenster erscheint, wählen Sie die Option Nein, den Computer später starten. Schalten Sie den Computer aus, um die Hardware zu installieren. Klicken Sie auf Finish (Fertigstellen), um die Installation der Software abzuschließen. 19
