VIPowER CD-ROM Box Enclosure VP-6029 user manual

User manual for the device VIPowER CD-ROM Box Enclosure VP-6029

Device: VIPowER CD-ROM Box Enclosure VP-6029
Category: Computer Hardware
Manufacturer: VIPowER
Size: 0.67 MB
Added : 9/5/2013
Number of pages: 9
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for VIPowER CD-ROM Box Enclosure VP-6029. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with VIPowER CD-ROM Box Enclosure VP-6029.

For your convenience

If looking through the VIPowER CD-ROM Box Enclosure VP-6029 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual VIPowER CD-ROM Box Enclosure VP-6029 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual VIPowER CD-ROM Box Enclosure VP-6029 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
VIPowER CD-ROM Box Enclosure VP-6029 User manual - Online PDF
Advertisement
« Page 1 of 9 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual VIPowER CD-ROM Box Enclosure VP-6029 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to VIPowER CD-ROM Box Enclosure VP-6029. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

CD-ROM Box Enclosur CD-ROM Box Enclosure e
CD-ROM Box Enclosur CD-ROM Box Enclosur CD-ROM Box Enclosure e e
Installation Guide
For Models:
VP-6020 VP-6028
VP-6022 VP-6029
VP-6023 VP-6048
VP-6024 VP-6049
TM
We are your DataBridge
http://www.vipower.com

Summary of the content on the page No. 2

Table of Contents 1-1 Introduction ........................................................................... 1 1-1.1 CD-ROM Box Enclosure Features .............................. 1 1-1.2 ATA/ATAPI Device Compatibility ................................. 1 1-1.3 Unpacking Your CD-ROM Box.................................... 1 2-1 Installation ............................................................................ 2 2-1.1 Disassemble the CD-ROM Box................................... 2 2-1.2 Ass

Summary of the content on the page No. 3

1-1 Introduction Congratulations on your purchase of one of the following CD-ROM Box Enclosures. Each CD-ROM Box Enclosure is an external enclosure which is designed to enable portable, hot-swap, plug-and-play operation of same-interface type 5.25” devices installed in the box. VP-6020 for IDE/ATA/ATAPI devices VP-6022 for SCSI (50-pin) interface VP-6024 for IDE Shuttle Module VP-6028 for USB interface VP-6029 for FireWire 1394 interface VP-6048 for USB interface with Mobile Rack VP-6049 for Fir

Summary of the content on the page No. 4

1-1.1 CD-ROM Box Enclosure Features • Enables portable use of 5.25” internal model removable media devices with computers equipped with the same interface • Supports hot-swap and plug-and-play features of the selected interface • Model VP-6020: enables cross-platform interface compatibility of 5.25” form factor IDE/ATA/ATA devices and ATAPI CD-ROM drives with computers using the same interface as the Docking Kit model (USB, Parallel, 1394/FireWire, SCSI, CARDBUS and PCMCIA). 1-1.2 Unpacking Your

Summary of the content on the page No. 5

Retaining Screws (x4) Top Cover Vertical-Holder (Note alignment Stand (Optional) flanges) Connectors/Fan End-Panel Rubber Bottom Cover Stands (Note cut-out (x4) for flange) Drive Rails Retaining Screws (x4) CD-ROM Box Enclosure Components 2-1.2 Assemble CD-ROM Box with CD-ROM Drive 1. Attach the two connectors from the end-panel assembly to the appropriate connectors on the CD-ROM drive. End-Panel 40-pin IDE Assembly Data Connector CD-ROM Drive Pin-1 Colored Stripe 4-pin Power Connector Power an

Summary of the content on the page No. 6

a. Attach the IDE 40-pin data cable from the end-panel to the 40-pin connector on the back of the CD-ROM drive. To ensure pin-1 to pin-1 connection, orient the cable so the colored stripe edge is closest to the power connector. b. Attach the 4-pin power cable from the end-panel to the 4-pin connector on the back of the CD-ROM drive. The connector is ‘D’ shaped to ensure proper connection. 2. Place the CD-ROM drive in the bottom enclosure cover. The CD-ROM drive’s front face panel should be flush

Summary of the content on the page No. 7

6. Align the cover’s mounting holes with the mounting holes on the drive rails and secure with four screws (two on each side). 7. Replace the four rubber stands, one on each of the four corners. Orient each stand so the raised nub is on the bottom. These help heat dissipation and provide secure placement of the CD-ROM Box. Assembled CD-ROM Box Enclosure 8. A vertical-holder stand is also provided as a convenient, space-saving method for setup of the CD-ROM Box Enclosure on your desktop. Simply a

Summary of the content on the page No. 8

3.1 Operation with a Docking Kit Perform the following steps (in the order given) to set up a Docking Unit with your CD-ROM Box Enclosure for operation. (Also refer to your Docking Kit’s installation manual for further details. Some Docking Kits do not provide a Power Select switch.) 1. For Windows 98 users: verify that the Windows 98 driver is installed (if required.) 2. Verify that the power switch on the Docking Unit is OFF. IMPORTANT The Power Select or Power ON/OFF switch (depending on mod

Summary of the content on the page No. 9

b. When using the Docking Kit’s interface for power, set switch to the RIGHT position. Note: it is recommended that you use the +5V /+12V power adapter whenever possible. 6. Connect the Docking Kit’s interface cable into the appropriate interface port on your computer; plug the other end into the connector port on the Docking Unit. 7. Viewing the screen, note that the plug-and-play feature will recognize the new device and assign it as a new drive. The device is now ready to use. Connector Inter


Alternative user manuals
# User manual Category Download
1 VIPowER CD-ROM Box Enclosure VP-6024 User manual Computer Hardware 2
2 VIPowER CD-ROM Box Enclosure VP-6023 User manual Computer Hardware 0
3 VIPowER CD-ROM Box Enclosure VP-6020 User manual Computer Hardware 0
4 VIPowER CD-ROM Box Enclosure VP-6022 User manual Computer Hardware 0
5 VIPowER CD-ROM Box Enclosure VP-6028 User manual Computer Hardware 4
6 VIPowER CD-ROM Box Enclosure VP-6049 User manual Computer Hardware 0
7 VIPowER CD-ROM Box Enclosure VP-6048 User manual Computer Hardware 0
8 Sony MSAKIT-PC4A User manual Computer Hardware 2
9 Sony MRW62E-S1 2694866142 User manual Computer Hardware 5
10 Philips MATCH LINE 9596 User manual Computer Hardware 17
11 Sony 64GB SDHC Class 10 Memory Card Readers SF32UY User manual Computer Hardware 1
12 Philips PSC702 User manual Computer Hardware 1
13 Sony MRW62E/S1/181 User manual Computer Hardware 3
14 Sony 64GB SDHC Class 10 Memory Card Readers SF32N4/TQM User manual Computer Hardware 1
15 Philips SAA7345 User manual Computer Hardware 1