Summary of the content on the page No. 1
C2SEA
C2SEE
USER’S MANUAL
Revision 1.0
Summary of the content on the page No. 2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves the
Summary of the content on the page No. 3
Preface Preface This manual is written for system integrators, PC technician and knowledgeable PC users. It provides information for the installation and use of the C2SEA/ C2SEE motherboard. About this Motherboard The C2SEA/C2SEE supports single Core 2™ Extreme/Core 2™ Quad/Core 2™ Duo Processor with a system bus speed of 1333 MHz/1066 MHz/800 MHz. The Intel Core 2™ Extreme/Core 2™ Quad/Core 2™ Duo Processor supports the 775-Land Grid Array Package that interfaces with the motherboard via a
Summary of the content on the page No. 4
C2SEA/C2SEE User’s Manual Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: Super Micro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hert
Summary of the content on the page No. 5
Preface Notes v
Summary of the content on the page No. 6
C2SEA/C2SEE User’s Manual Table of Contents Preface About This Manual ...................................................................................................... iii Manual Organization ....................................................................................................iii Conventions Used in the Manual ..................................................................................iii Chapter 1: Introduction 1-1 Overview ..........................................
Summary of the content on the page No. 7
Table of Contents 2-6 Connecting Cables .......................................................................................... 2-13 ATX/Auxiliary Power Connectors ........................................................... 2-13 GLAN1 Port .............................................................................................. 2-13 Universal Serial Bus (USB) ..................................................................... 2-14 GLAN1 Port ..........................................
Summary of the content on the page No. 8
C2SEA/C2SEE User’s Manual Chapter 3: Troubleshooting 3-1 Troubleshooting Procedures .............................................................................. 3-1 Before Power On ....................................................................................... 3-1 No Power ................................................................................................... 3-1 No Video .................................................................................................. 3-
Summary of the content on the page No. 9
Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview Checklist Congratulations on purchasing your computer motherboard from an acknowledged leader in the industry. Supermicro boards are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. Please check that the following items have all been included with your motherboard. If anything listed here is damaged or missing, contact your retailer. The following items are included i
Summary of the content on the page No. 10
C2SEA/C2SEE User’s Manual C2SEA Motherboard Image Note: All pictures and drawings shown in this manual were based upon the latest PCB Revision available at the time of publishing of the manual. The motherboard you have received may or may not look exactly the same as those in this manual. 1-2
Summary of the content on the page No. 11
Chapter 1: Introduction Notes 1-3
Summary of the content on the page No. 12
C2SEA/C2SEE User’s Manual Motherboard Layout Fan1 J17 CPU J3 J18 J7 Fan5 Intel G45 (C2SEA) J4 G43 (C2SEE) J6 Slot7 PCI-E x1 C2SEA/C2SEE JPL1 Slot6 PCI-E Gen2 x16 SPI BIOS JBT1 Lan Intel CTRL CMOS CLEAR Slot5 PCI 33MHZ JLED1 ICH10 Battery J12 Slot4 PCI-E x4 on x16 FP Audio JWD1 JOH1 I-SATA0 I-SATA4 Slot3 PCI 33MHz I-SATA1 I-SATA5 JD1 I-SATA2 USB 10/11 JPD1 Slot2 PCI 33MHz CD1 SPKR1 I-SATA3 S I/O JPI1 IDE JPUSB2 USB 8/9 JPAC JWOL1 CTRL Slot1 PCI 33MHz USB6 USB7 Floopy Printer JWOR IDE Fan4 1394_1
Summary of the content on the page No. 13
Chapter 1: Introduction C2SEA/C2SEE Quick Reference Jumpers Description Default Setting JBT1 CMOS Clear See Chapter 2 JD1 Onboard Speaker Enable Pins 3-4 (Enabled) 2 2 JI C1/JI C2 SMB to PCI Slots See Chapter 2 JP11 (C2SEA) 1394_1/ 1394_2 Enable Pins 1-2 (Enabled) JPAC Audio Enable Pins 1-2 (Enabled) JPD1 (C2SEA) IDE Enable Pins 1-2 (Enabled) JPL1 Gigabit LAN 1/LAN 2 Enable Pins 1-2 (Enabled) JPUSB1/JPUSB2 USB 0-5 Enable/USB 6-11 Enable Pins 1-2 (Enabled) Pins 1-2 (Reset) JWD Watch Dog Time
Summary of the content on the page No. 14
C2SEA/C2SEE User’s Manual Motherboard Features Processor � Single Intel Core 2™ Extreme/Quad/Duo processor with an FSB of 1333/1066/800 MHz Memory � Up to 8GB of Unbuffered non-ECC DDR3@1066/800 memory for single-channel or dual-channel interleaved mode in four DIMM sockets (C2SEA) � Up to 4GB of Unbuffered non-ECC DDR3@1066/800 memory for single-channel or dual-channel interleaved mode in two DIMM sockets (C2SEE) Chipset � Intel G45 GMCH (C2SEA) or G43 GMCH (C2SEE) � ICH10 Expansion Sl
Summary of the content on the page No. 15
Chapter 1: Introduction ACPI Features � Slow blinking LED for suspend state indicator � BIOS support for USB keyboard � Main switch override mechanism � External modem ring-on Onboard I/O � Built in ICH10 SATA Controller, 6 connectors for up to 6 devices � One fast UART 16550 compatible serial port � Realtek RTL8111C Gigabit Ethernet controllers � PS/2 mouse and PS/2 keyboard ports � ITE 8213F Controller supports one IDE channel & two devices (C2SEA only) � 12 USB (Universal Serial Bus) 2.
Summary of the content on the page No. 16
C2SEA/C2SEE User’s Manual Block Diagram LGA775_Processor VRM 11.1 FSB: 1333/1066/800 PCIE_x16 PCI_E x16 DIMM_CHA G45(C2SEA) DDR3:1066/800 MUX & DIMM_CHB HDMI(C2SEA) G43(C2SEE) Level Shift MCH CRT DMI PCIE_X1 PCIE_x4 PCI_E x4 Realtek RTL8111C PCIE_x1 SATAII /300 ICH10 PCI_E x1 Slot SATA x6 PCI_32_BUS USB2.0 ITE 8213F IDE USB x 12 PCI 32 x4 (C2SEE) PCI 32 x2 (C2SEA) W83627DHG TI TSB43AB22A LPC I/O FAN x5 SPI SPI EEPROM HDA Realtek ALC888 KB. Floppy COM1 Parallel MS. C2SEA/C2SEE System Block Diagr
Summary of the content on the page No. 17
Chapter 1: Introduction 1-2 Chipset Overview The Intel G45/G43 Express Chipset is specially designed for use with Intel Core 2™ Extreme/Core Quad/Core Duo LGA 775 processors. It consists of two primary components: the Graphics and Memory Controller Hub (GMCH), and the I/O Con- troller Hub (ICH10). The GMCH manages the data fl ow between the CPU interface, the System Memory interface, the External Graphics interface (or PCI-Express Interface), and the I/O Controller through the Direct Media I
Summary of the content on the page No. 18
C2SEA/C2SEE User’s Manual 1-3 Recovery from AC Power Loss BIOS provides a setting for you to determine how the system will respond when AC power is lost and then restored to the system. You can choose for the system to remain powered off (in which case you must hit the power switch to turn it back on) or for it to automatically return to a power on state. See the Power Lost Control setting in the BIOS chapter of this manual to change this setting. The default set- ting is Power-Off. 1-4 PC H
Summary of the content on the page No. 19
Chapter 1: Introduction Slow Blinking LED for Suspend-State Indicator When the CPU goes into a suspend state, the chassis power LED will start blinking to indicate that the CPU is in suspend mode. When the user presses any key, the CPU will wake-up and the LED will automatically stop blinking and remain on. BIOS Support for USB Keyboard If the USB keyboard is the only keyboard in the system, it will function like a normal keyboard during system boot-up. Wake-On-LAN (WOL) Wake-On-LAN is defi
Summary of the content on the page No. 20
C2SEA/C2SEE User’s Manual 1-7 Versatile Media Capabilities High-Defi nition Audio and HDMI Connections The High-Defi nition Audio Controller, embedded in the ICH10, delivers up to four codecs, supporting different types of codecs. Operating at 3.3V or 1.5V, the embed- ded Audio Controller supports a multi-channel audio stream, 32-bit sample depth, up to 192 kHz of same rate, and can be used with a variety of microphones for input. In addition to the HD Audio connection, the C2SEA also includes
